铸铁管输配再生水铁溶出颗粒物特征研究

针对输配水过程中产生的"红水"现象及铁颗粒物溶出对水质的影响,开展了初步的模拟管网中试研究.实验采用内径为100 mm的铸铁管搭建了120 m长管网中试模拟系统,并以北京某再生水厂生产的再生水为水源,进行了单向连续流动和密闭循环流动模拟管网输配实验,并对管网出水水质进行了的连续跟踪监测.中试结果表明,两种方式的实验都发生了"红水"现象;出水水质的p H、总溶解性固体(TDS)、电导率及总铁都有明显升高;实验过程中得到的两种不同颜色颗粒物,它们都包括α-Fe OOH、γ-Fe OOH、Fe CO3、Fe2O3、Fe3O4及Fe O等矿物质;颗粒物颜色可能与颗粒中羟基氧化铁与碳酸亚铁的含量有关;水流速度对于管网中颗粒物的沉积和释放要一定影响;不带内衬的铸铁管不适合作为输配腐蚀性极强水质再生水的管材.     

沉积物金属迁移-转化的影响因素及其规律

沉积物金属的迁移-转化行为和污染风险一直是研究热点。金属污染物在人为或自然因素下进入水体,绝大部分通过沉降作用成为沉积物固定相,如此,底泥也成了河流生态系统中重要的污染源(汇)。受外界条件干扰,沉积物和上覆水体环境条件随之变化,固定的金属污染物很可能会被释放到水体中,对生态环境造成危害。通过文献研究,对金属在水环境中的主要形态,影响沉积物-金属结合物迁移-转化的环境要素及影响机制,金属的生物可利用性和污染风险进行了综述。最后提出应加强对环境参数的变化程度和金属释放的量化关系,沉积物再悬浮-金属释放的预测模型,具有长期稳定性和可持续性的底泥污染修复和控制技术方面的研究。     

Experimental study of the evaporation of spreading liquid nitrogen

The investigation of cryogenic liquid pool spreading is an essential procedure to assess the hazard of cryogenic liquid usage. There is a wide range of models used to describe the spreading of a cryogenic liquid pool. Many of these models require the evaporation velocity, which has to be determined experimentally because the heat transfer process between the liquid pool and the surroundings is too complicated to be modeled. In this experimental study, to measure the evaporation velocity when the pool is spreading, liquid nitrogen was continuously released onto unconfined concrete ground. Almost all of the reported results are based on a non-spreading pool in which cryogenic liquid is instantaneously poured onto bounded ground for a very short period of time. For the precise measurement of pool spreading and evaporation weight with time, a cone-type funnel was designed to achieve a nearly constant liquid nitrogen release rate during discharge. Specifically, three nozzles with nominal flow rates of 3.4 × 10⁻² kg/s, 5.6 × 10⁻² kg/s and 9.0 × 10⁻² kg/s were used to investigate the effect of the release rate on the evaporation velocity. It is noted that information about the release rate is not necessary to measure the evaporation velocity in case of the non-spreading pool. A simultaneous measurement of the pool location using thermocouples and of the pool mass using a digital balance was carried out to measure the evaporation velocity and the pool radius. A greater release flow rate was found to result in a greater average evaporation velocity, and the evaporation velocity decreased with the spreading time and the pool radius.     

Effect of initial temperature on the explosion pressure of various liquid fuels and their blends

In this work, the effect of initial temperature on the explosion pressure, P_ex, of various liquid fuels (isooctane, toluene and methanol) and their blends (isooctane-toluene and methanol-toluene, with three different fuel-fuel ratios) was investigated by performing experiments in a 20-l sphere at different concentrations of vaporized fuel in air. The initial temperature was varied from 333 K to 413 K.Results show that, as the fuel-air equivalence ratio, Φ, is increased, a transition occurs from a “thermodynamics-driven” explosion regime to a “radiant heat losses-driven” explosion regime. The maximum pressure, P_max, is found in the former regime (Φ < 3), which is characterized by a trend of decreasing P_ex with increasing initial temperature. This trend has been explained by thermodynamics. In the latter regime (Φ > 3), P_ex increases with increasing initial temperature. This trend has been addressed to the decrease in emissivity (and, thus, radiant heat losses) with the increase in temperature.     

分散固相萃取/高效液相色谱法测定土霉素菌渣中土霉素的残留量

文章拟建立一种从土霉素菌渣中提取并检测土霉素残留量的高效液相色谱法。用甲醇和冰乙酸作为提取剂提取样品,用分散固相萃取的方法净化样品,净化药剂为石墨化碳黑(GCB)和C18。通过加标回收实验,用高效液相色谱仪检测样品中土霉素含量。选用的色谱柱为PLRP-S,流动相为甲醇和0.05 mol/L草酸,两者比例为35:65(V:V)。检测波长为355 nm,柱温30℃。经检测,土霉素在0.1~2 000 mg/L范围内线性相关系数大于0.999,线性良好。1.0,4.0及8.0mg/g 3个加标水平的土霉素平均回收率范围是80.85%~109.59%,相对标准偏差(RSD)为2.45%~6.38%。土霉素菌渣中土霉素残留量平均为4.741 mg/g。实验表明,该方法具有简单、方便、快速、准确性强、灵敏度高的特点,可以应用于土霉素的分析检测。     

The national biological impact assessment program∗

The need to safely field test genetically modified organisms is a critical step in the sequence of research leading to the commercialization of biotechnology in agriculture. To address this need the United States Department of Agriculture has established the National Biological Impact Assessment Program (NBIAP) to facilitate the safe field testing of genetically modified organisms. NBIAP fosters safe field testing of genetically modified organisms through a computerized network for information exchange, facilitation of biological monitoring techniques and by providing support for research in biosafety to develop new field testing methods and better predictive models.     

Preparation of controlled nano-MgO and investigation of its bactericidal properties

Nano-MgO is a good bactericide but with strong alkalinity in water due to its rapid hydrolysis. To control its hydrolysis rate and keep its bactericidal properties, we synthesized nano-MgO microspheres using chitosan-alginate system in this study. The synthesized nano-MgO release-controlled microspheres (nMgO-RCM) were with 0.98-1.20 mm of particle sizes. Also, their embedding ratio and loading percentage was 63.52% and 12.27%, respectively. Based on the characterization results, nano-MgO was only observed on surface of the nMgO-RCM. Its release rate from the nMgO-RCM could be controlled by the chitosan-alginate system, and the observed rate constant (k_obs) increased from 0.0289 h⁻¹ to 0.0358 h⁻¹ with the increment of the dosage from 10 mg L⁻¹ to 80 mg L⁻¹. Furthermore, the nMgO-RCM could maintain pH value lower than 8.5 and colony counts less than 20 CFU mL⁻¹ for at least 120 h.     

基于正交试验的谷物粉尘燃烧特性影响因素研究

为了研究谷物粉尘燃烧特性影响因素，以可食用玉米淀粉为研究对象，通过ZY6243锥形量热仪（CONE）进行了单因素和正交试验，研究了粉尘粒径、惰性介质CaCO3质量分数、热辐射通量对玉米淀粉燃烧特性的影响效应。应用直观分析法和方差分析法定性地研究了各因素对玉米淀粉热释放速率峰值的影响程度并进行了排序，2种方法得出的结论基本一致。研究结果表明:各因素对玉米淀粉热释放速率峰值的影响程度依次为:CaCO3质量分数＞粉尘粒径＞热辐射通量；其中惰性介质CaCO3对热释放速率峰值和引燃时间的影响最为显著。     

Pesticide binding and urea-induced controlled release applications with calixarene naphthalimide molecules by host–guest complexation

ABSTRACT

Three novel calix[4]arene molecule-based 1,8 naphthalimide fluoroionophore for the selective determination of kesoxim-methyl were synthesized and used in pesticide binding studies. The possible interaction between pesticides and fluorescent calix[4]arene molecules was monitored by UV/Vis absorption and fluorescence spectroscopy. When compared the studied pesticides, kesoxim-methyl was strongly quenched the fluorescence intensity of upper rim-modified calix[4]arene. UV and fluorescence titration experiments were also studied to determine both the quenching mechanism and stoichiometric ratio consisted in complex formation. Furthermore, pesticide release experiments were also performed with a fertilizing agent as urea by using fluorescence spectroscopy technique.     

Polymer and invert emulsifying oil effects upon droplet size spectra of sprays

Abstract

A series of wind tunnel atomization studies were carried out to investigate the effects of polymer and invert suspension oil “drift control adjuvants” upon the droplet size distribution spectra produced by nozzles typically used in aerial and ground based spraying of pesticides. A D8–46 disc and core was used as a typical aerial application nozzle, and an 8003 fan nozzle was used for the ground based sprayers simulation. The droplet size spectra were evaluated in a wind tunnel using a Malvern 2600 laser particle size analyzer immediately upon mixing and at 15 minutes after re‐circulation through a pumping system. The addition of the polymer‐based adjuvants significantly increased the droplet size spectra parameters of the spray cloud, but all the polymer products showed signs of breakdown of their molecular arrangements in the liquid medium, as a result of agitation. The invert suspension oil adjuvant did not change the droplet size spectra markedly, nor did it show signs of breakdown of the internal liquid structure after re‐circulation.