移动床生物膜反应器充氧能力的试验研究

对移动床生物膜反应器的充氧能力进行了试验研究，结果表明：反应器充氧能力在添加填料比无填料时大；在悬浮载体能够均匀流化的填充率范围内，反应器充氧能力随着填充率的增大而增大；当填充率大于可以均匀流化的最大填充率时，反应器的充氧能力略有下降。     

一起油罐爆炸火灾原因调查及分析

对一起油罐爆炸火灾事故进行了调查，对回流油速度进行了测算，从静电的产生和放电、爆炸性气体混合物的形成进行了分析和研究，指出了火灾原因，提出了应吸取的教训。     

Microbial cycling of iron and sulfur in acidic coal mining lake sediments

Lakes caused by coal mining processes are characterized by low pH, low nutrient status, and high concentrations of Fe(II) and sulfate due to the oxidation of pyrite in the surrounding mine tailings. Fe(III) produced during Fe(II) oxidation precipitates to the anoxic acidic sediment, where the microbial reduction of Fe(III) is the dominant electron-accepting process for the oxidation of organic matter, apparently mediated by acidophilic Acidiphilium species. Those bacteria can reduce a great variety of Fe(III)-(hydr)oxides and reduce Fe(III) and oxygen simultaneously which might be due to the small differences in the redox potentials under low pH conditions. Due to the absence of sulfide, Fe(II) formed in the upper 6 cm of the sediment diffuses to oxic zones in the water layer where itcan be reoxidized by Acidithiobacillus species. Thus, acidic conditions are stabilized by the cycling of iron which inhibits fermentative and sulfate-reducing activities. With increasing sediment depth, the amount of reactive iron decrease, the pH increases above 5, and fermentative and as yet unknown Fe(III)-reducing bacteria are also involved in the reduction of Fe(III). Sulfate is reduced apparently by the activity of spore-forming sulfate reducers including new species of Desulfosporosinus that have their pH optimum similar to in situconditions and are not capable of growth at pH 7. However, generation of alkalinity via sulfate reduction is reduced by the anaerobic reoxidation of sulfide back to sulfate. Thus, the microbial cycling of iron at the oxic-anoxic interface and the anaerobic cycling of sulfur maintains environmental conditions appropriate for acidophilic Fe(III)-reducing and acid-tolerant sulfate-reducing microbial communities.     

Starch, Poly(lactic acid), and Poly(vinyl alcohol) Blends

Research on biodegradable materials has been stimulated due to concern regarding the persistence of plastic wastes. Blending starch with poly(lactic acid) (PLA) is one of the most promising efforts because starch is an abundant and cheap biopolymer and PLA is biodegradable with good mechanical properties. Poly(vinyl alcohol) (PVOH) contains unhydrolytic residual groups of poly(vinyl acetate) and also has good compatibility with starch. It was added to a starch and PLA blend (50:50, w/w) to enhance compatibility and improve mechanical properties. PVOH (M_W 6,000) at 10%, 20%, 30%, 40%, 50% (by weight) based on the total weight of starch and PLA, and 30% PVOH at various molecular weights (M_W 6,000, 25,000, 78,000, and 125,000 dalton) were added to starch/PLA blends. PVOH interacted with starch. At proportions greater than 30%, PVOH form a continuous phase with starch. Tensile strength of the starch/PLA blends increased as PVOH concentration increased up to 40% and decreased as PVOH molecular weight increased. The increasing molecular weight of PVOH slightly affected water absorption, but increasing PVOH concentration to 40% or 50% increased water absorption. Effects of moisture content on the starch/PLA/PVOH blend also were explored. The blend containing gelatinized starch had higher tensile strength. However, gelatinized starch also resulted in increased water absorption.     

对Janbu普遍条分法计算方法的改进

Janbu普遍条分法(或称严格Janbu法)是第一个基于任意形状滑面且考虑滑体所有平衡条件的边坡稳定性计算方法。该方法存在的严重不收敛问题一直困扰着边坡理论和工程界近半个世纪。本文基于Janbu普遍条分法的基本原理和假设,重新推导出数学上更为简洁的安全系数积分表达式,指出传统计算格式不易收敛性是推力二阶导数的不合理数值误差所致,应用数值平滑技术可减少这个误差,使计算过程稳定收敛。研究表明,改进后的Janbu普遍条分法不失为理论相对严格、工程较为实用的边坡稳定性计算方法。     

活性污泥吸附重金属Cr6+的研究

以活性污泥为材料，采用不同时间、温度、pH进行吸附重金属Cr^6 的研究。实验结果表明，当吸附时间为15min，吸附温度为28℃，吸附pH=7时具有较好吸附效果。在此条件下，当重金属Cr^6 浓度为50mg/L，其吸附率可达97．2％。     

Specific Contributions of Politics,Economics, and Toxicology in Setting Socially Consensual Limit Values

/ Limit values are legal limits for the concentrations of substances in the environment. They must be agreed upon in a consensual procedure between science, economics/technology, and political forces. This is a crucial political precondition for their social acceptance. The arguments put forward to justify their expediency and numerical level are based not only on risk-benefit considerations but also on the aspect of the technical avoidability of direct and indirect exposure. The critical assessment of the direct benefit of specified exposures falls within the responsibility of economics/technology, whereas criteria for their potential adverse effects (direct and indirect) are provided by medicine/biochemistry and/or ecology. Within this concept, the avoidance of nonbeneficial-even if not openly adverse-exposure is the essential aim of environmental hygiene and should be promoted by politics/science. In general, society or segments thereof reject adverse, accept beneficial, and tolerate unavoidable exposure. Conflicts of interest arise when different groups of society simultaneously define a given exposure as being adverse, beneficial, and unavoidable. Therefore, from the viewpoint of society as a whole, an optimal exposure lies as far as reasonably achievable at a level lower than known or plausible adverse effect thresholds (as defined by toxicology or ecology). This optimal level of exposure must be determined using a transparent and, hence, public procedure.KEY WORDS: Legal limit values; Benefit threshold; Social acceptance; Social tolerability; Adverse effect threshold; Avoidable exposure; Tolerance threshold; Environmental hygiene     

环境医学：人类生存发展战略的大课题

文章用大量翔实数据，分析论证：人类由于淡化环境意识，坚持急功近利的片面发展观，造成整个地球环境质量正在全面下降和恶化，全球已有１／５的人口受到环境污染之害的基点上，作者提出了只有跳出以自我生存为中心的狭隘圈，确立发展环境医学为主体的预防医学战略，并提示要遵循中国古代强调的“天人合一”论概念和钱学森提出的“开放的巨系统方法论”在当代科技领域进行“天地生人巨系统的综合集成研究”，树立“天地与我并生，万物与我同运”的自然生态观，为创建“生物心理社会自然”为模式的全科新医学，这是实现２１世纪“人类健康工程”的开拓性目标。     

视屏作业人员慢性肌肉骨骼损伤的调查研究

２３２名微机操作人员的慢性肌肉骨骼损伤表现为肩、颈、下背的酸痛和肩疲劳，与对照组比差异显著。手、腕及上肢的慢性损伤虽较对照组高，但无统计学意义。这与他们的击键次数相对较少（每日１００００次左右），但需长期间保持低头及向前弯腰的坐位姿势及工作台面太高等因素有关