Toxic loads and explosion overpressure loads pose grave threats to the offshore oil and gas industry. Many safety measures are adopted to prevent and mitigate the adverse impacts caused by toxic loads and explosion overpressure loads. As a general safety barrier, the process protection system has been widely used but rarely evaluated. In order to assess the barrier ability, the mitigation performance of the process protection system is concerned in this study. Firstly, several chain accidents of H2S-containing natural gas leakage and explosion are simulated by varying the response time of the process protection system with CFD code FLACS. Qualitative assessment is conducted based on the variation of the dangerous load profiles. Furthermore, the quantitative assessment of the mitigation performance is accomplished by considering its ability in reducing the probability of fatality. Emergency evacuation and no emergency evacuation are considered respectively in the quantitative assessment. The results prove that the process protection system takes effect on mitigating the toxic impact and explosion overpressure impact. The results also demonstrate that although the emergency evacuation may result in a severer explosion load to the operator, the process protection system can mitigate the adverse impacts regardless of whether the emergency evacuation is conducted or not. 相似文献
The present experiment was done to evaluate the impact of ambient air pollution on carrot (Dacus carotavar. Pusa Kesar) plants using open top chambers (OTCs) ventilated with ambient (NFCs) or charcoal filtered air (FCs) at a suburban site of Varanasi, India. Various morphological, physiological and biochemical characteristics of the plants were studied at different growth stages. Air monitoring data clearly showed high concentrations of SO2, NO2and O3in the ambient air of study site. SO2and NO2concentrations were higher during early growth stages of carrot, whereas O3concentration was highest during later growth stages. Filtration of air has caused significant reductions in all the three pollutant concentrations in FCs as compared to NFCs.Plants growing in FCs showed significantly higher photosynthetic rate, stomatal conductance, water use efficiency and variable fluorescence as compared to plants growing in NFCs. Protein content also showed a similar pattern, however, lipid peroxidation, ascorbic acid content and peroxidase activity were higher in plants growing in NFCs as compared to FCs. Shoot length, number of leaves per plant, leaf area and root and shoot weight increased significantly upon filtration of ambient air. Total nitrogen decreased significantly in root, but increased significantly in shoot of plants grown in NFCs. Total P, Mg, Ca and K contents decreased significantly in plants grown in NFCs as compared to FCs. The individual pollutant concentrations were below threshold for plant injury, but the combined effect of all the three seems to act synergistically in causing greater adverse impact on dry weight and physiology of carrot plants. The study clearly indicates that air pollutants are high enough in the ambient air to cause significant unfavorable impact on carrot plants. The work further supports the usefulness of OTCs for assessing air pollution damage under field conditions in developing countries. 相似文献
The generation of reliable updated information is critical to support the harmonization of socio-economic and environmental
issues in a context of sustainable development. The agro-environmental assessment and management of agricultural systems often
relies on indicators that are necessary to make sound decisions. This work aims to provide an approach to (a) assess the environmental
performance of commercial farms in the Pampas of Argentina, and (b) propose a methodological framework to calculate environmental
indicators that can rapidly be applied to practical farming. 120 commercial farms scattered across the Pampas were analyzed
in this study during 2002 and 2003. Eleven basic indicators were identified and calculation methods described. Such indicators
were fossil energy (FE) use, FE use efficiency, nitrogen (N) balance, phosphorus (P) balance, N contamination risk, P contamination
risk, pesticide contamination risk, soil erosion risk, habitat intervention, changes in soil carbon stock, and balance of
greenhouse gases. A model named Agro-Eco-Index was developed on a Microsoft-Excel support to incorporate on-farm collected data and facilitate the calculation of indicators
by users. Different procedures were applied to validate the model and present the results to the users. Regression models
(based on linear and non-linear models) were used to validate the comparative performance of the study farms across the Pampas.
An environmental dashboard was provided to represent in a graphical way the behavior of farms. The method provides a tool
to discriminate environmentally friendly farms from those that do not pay enough attention to environmental issues. Our procedure
might be useful for implementing an ecological certification system to reward a good environmental behavior in society (e.g.,
through tax benefits) and generate a commercial advantage (e.g., through the allocation of green labels) for committed farmers. 相似文献
Industrial workplaces pose concurrent hazards to the upper part of the head and the eyes. Under the circumstances, workers may use protective helmets in conjunction with protective goggles or spectacles. In order to assess the compatibility of this equipment, a method and a test stand for evaluating the behavior of safety helmets and protective goggles/spectacles upon the impact of a falling weight were designed. The results of tests concerning the displacement and deformation of helmets and spectacles/goggles, the forces acting on the helmets, as well as the forces exerted by the spectacles/goggles on the headform upon falling weight impact are presented. The results revealed the ways in which the tested equipment interacted with each other. The influence of equipment construction on the test results was analyzed and inferences concerning the safety of the studied protective devices were made. Some general construction guidelines were formulated for the compatibility of the equipment. 相似文献
Objective: The objective of this article was the construction of injury risk functions (IRFs) for front row occupants in oblique frontal crashes and a comparison to IRF of nonoblique frontal crashes from the same data set.
Method: Crashes of modern vehicles from GIDAS (German In-Depth Accident Study) were used as the basis for the construction of a logistic injury risk model. Static deformation, measured via displaced voxels on the postcrash vehicles, was used to calculate the energy dissipated in the crash. This measure of accident severity was termed objective equivalent speed (oEES) because it does not depend on the accident reconstruction and thus eliminates reconstruction biases like impact direction and vehicle model year. Imputation from property damage cases was used to describe underrepresented low-severity crashes―a known shortcoming of GIDAS. Binary logistic regression was used to relate the stimuli (oEES) to the binary outcome variable (injured or not injured).
Results: IRFs for the oblique frontal impact and nonoblique frontal impact were computed for the Maximum Abbreviated Injury Scale (MAIS) 2+ and 3+ levels for adults (18–64 years). For a given stimulus, the probability of injury for a belted driver was higher in oblique crashes than in nonoblique frontal crashes. For the 25% injury risk at MAIS 2+ level, the corresponding stimulus for oblique crashes was 40 km/h but it was 64 km/h for nonoblique frontal crashes.
Conclusions: The risk of obtaining MAIS 2+ injuries is significantly higher in oblique crashes than in nonoblique crashes. In the real world, most MAIS 2+ injuries occur in an oEES range from 30 to 60 km/h. 相似文献
On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account. 相似文献