A new approach to quantitative assessment of reliability of passive systems

The objective of this paper is to show how probabilistic reliability can be assessed for complex systems in the absence of statistical data on their operating experience, based on performance evaluation of the dominant underlying physical processes. The approach is to distinguish between functional and performance probabilities when dealing with the quantification of the overall probability of a system to perform a given function in a given period of time (reliability). In the case of systems where sufficient statistical operating experience data are available, one can focus the quantitative evaluation entirely on the assessment of the functional probability for a given active item (e.g. a pump) by assuming that the specification, layout, construction and installation is such that the item is providing the assigned performance, e.g. in the form of generating the required flow rate. This is how traditional probabilistic safety assessments (PSAs) focus the reliability analysis for the various safety features on the calculation of values for the availability per demand. In contrast, for various systems relevant in advanced technical applications, such as passive safety features in innovative reactor designs, it is essential to evaluate both functional and performance probabilities explicitly and combine the two probabilities later on. This is of course due to the strong reliance of passive safety systems on inherent physical principles. In practice, this means that, for example, in case of a passive cooling system based on natural circulation of a given medium, one has to evaluate and to assess the probability to have a medium condition and a flow rate such that a cladding temperature, represented by a probability distribution, can be hold at a required level. A practical example of this method is given for the case of the reliability assessment of a residual passive heat removal system. General conclusions are drawn regarding reliability estimation of complex, interconnected systems in the absence of statistical performance data, such as for infrastructures.     

物流与安全

论述了物流与安全的发展过程,研究了物流与安全的密切关系,物流被誉为企业的"第三利润源",安全就能使其实现"第四利润",良好的物流系统工程应该是安全的系统工程,提出了促进物流与安全协调发展的策略.     

计算机辅助故障模式影响分析与事件序列图综合分析方法研究

故障模式影响分析(Failure Mode Effect Analysis, FMEA)和事件序列图(Event Sequence Diagram, ESD)是分析系统故障因果关系的两种常用技术,在分别独立应用时,既有各自的优点,也存在着一定的缺陷和不足,主要体现为: FMEA不能展示故障模式到故障后果的推演过程; ESD模型的合理性很大程度上取决于初始事件的确定,而该方法本身不能实现这一功能.本文综合FMEA与ESD的优点,阐述了复杂动态系统FMEA与ESD综合分析的思路,对现有FMEA进行了一定的改进,并进一步分析计算机辅助FMEA和ESD综合方法建模的原理和实现技术.     

基于群集动力学模型的密集场所人群疏散问题研究

密集场所人群疏散问题直接关系到大型公共场所的安全保障能力.应用群集动力学理论方法,在密集人群群体流动过程和个体流动过程分析的基础上,对已有的人群疏散数学模型进行改造,使之更加符合实际意义.以实际人群密集场所为例,进行数值仿真,寻求一定人流密度和疏散时间约束下的最佳疏散通道宽度以及关于开放疏散出口数量的最佳疏散策略,以达到最佳的疏散效果.为有效解决应急环境下密集场所人群疏散问题提供了理论依据,可用于指导密集场所建筑物的结构设计改进,以及疏散过程中的调度管理优化等.     

Methodological issues in forestry mitigation projects: a case study of Kolar district

There is a need to assess climate change mitigation opportunities in forest sector in India in the context of methodological issues such as additionality, permanence, leakage and baseline development in formulating forestry mitigation projects. A case study of forestry mitigation project in semi-arid community grazing lands and farmlands in Kolar district of Karnataka, was undertaken with regard to baseline and project scenario development, estimation of carbon stock change in the project, leakage estimation and assessment of cost-effectiveness of mitigation projects. Further, the transaction costs to develop project, and environmental and socio-economic impact of mitigation project was assessed. The study shows the feasibility of establishing baselines and project C-stock changes. Since the area has low or insignificant biomass, leakage is not an issue. The overall mitigation potential in Kolar for a total area of 14,000 ha under various mitigation options is 278,380 t C at a rate of 20 t C/ha for the period 2005–2035, which is approximately 0.67 t C/ha/year inclusive of harvest regimes under short rotation and long rotation mitigation options. The transaction cost for baseline establishment is less than a rupee/t C and for project scenario development is about Rs. 1.5–3.75/t C. The project enhances biodiversity and the socio-economic impact is also significant.

Participatory Model Calibration for Improving Resource Management Systems: Case Study of Rainwater Harvesting in an Indian Village

While planning resource management systems in rural areas, it is important to consider criteria that are specific to the local social conditions. Such criteria might change from one region to another and are hence best identified using a participatory approach. In this work, we propose a participatory framework to identify such criteria and derive their weights. These identified criteria and their weights are used as parameters to develop a quantitative model for evaluating efficiency of each system. Such a model can serve as a support tool for stakeholders to simulate and analyze “what‐if” scenarios, evaluate alternatives, and select one which best satisfies their requirements. We use existing systems to test the model by comparing efficiencies evaluated by the model to efficiencies perceived by the stakeholders. The model is calibrated by repeating the process until statistically significant correlation is achieved between evaluated and perceived efficiencies. The novelty of the proposed framework lies in treating efficiencies perceived by the stakeholders as the ground truth since they know these systems well and are their ultimate users. The framework is successfully demonstrated using case study of rainwater harvesting (RWH) systems in an Indian village. The resulting calibrated model can be used to plan new RWH systems in this region and similar regions elsewhere. The framework can be used to plan other resource management systems in various regions.     

Methane and nitrous oxide emissions from a subtropical coastal embayment (Moreton Bay,Australia)

Surface water methane (CH₄) and nitrous oxide (N₂O) concentrations and fluxes were investigated in two subtropical coastal embayments (Bramble Bay and Deception Bay, which are part of the greater Moreton Bay, Australia). Measurements were done at 23 stations in seven campaigns covering different seasons during 2010–2012. Water–air fluxes were estimated using the Thin Boundary Layer approach with a combination of wind and currents-based models for the estimation of the gas transfer velocities. The two bays were strong sources of both CH₄ and N₂O with no significant differences in the degree of saturation of both gases between them during all measurement campaigns. Both CH₄ and N₂O concentrations had strong temporal but minimal spatial variability in both bays. During the seven seasons, CH₄ varied between 500% and 4000% saturation while N₂O varied between 128 and 255% in the two bays. Average seasonal CH₄ fluxes for the two bays varied between 0.5 ± 0.2 and 6.0 ± 1.5 mg CH₄/(m²·day) while N₂O varied between 0.4 ± 0.1 and 1.6 ± 0.6 mg N₂O/(m²·day). Weighted emissions (t CO₂-e) were 63%–90% N₂O dominated implying that a reduction in N₂O inputs and/or nitrogen availability in the bays may significantly reduce the bays' greenhouse gas (GHG) budget. Emissions data for tropical and subtropical systems is still scarce. This work found subtropical bays to be significant aquatic sources of both CH₄ and N₂O and puts the estimated fluxes into the global context with measurements done from other climatic regions.     

Optimal Design Methods for Hybrid Renewable Energy Systems

Renewable and hybrid energy systems (HESs) are expanding due to environmental concerns of climate change, air pollution, and depleting fossil fuels. Moreover, HESs can be cost effective in comparison with conventional power plants. This article reviews current methods for designing optimal HESs. The survey shows these systems are often developed on a medium scale in remote areas and stand-alone, but there is a global growing interest for larger scale deployments that are grid connected. Examples of HESs are PV–wind–battery and PV–diesel–battery. PV and wind energy sources are the most widely adopted. Diesel and batteries are often used but hydrogen is increasing as a clean energy carrier. The design of an efficient HES is challenging because HES models are nonlinear, non-convex, and composed of mixed-type variables that cannot be solved by traditional optimization methods. Alternatively, two types of approaches are typically used for designing optimal HESs: simulation-based optimization and metaheuristic optimization methods. Simulation-based optimization methods are limited in view of human intervention that makes them tedious, time consuming, and error prone. Metaheuristics are more efficient because they can handle automatically a range of complexities. In particular, multi-objective optimization (MOO) metaheuristics are the most appropriate for optimal HES because HES models involve multiple objectives at the same time such as cost, performance, supply/demand management, grid limitations, and so forth. This article shows that the energy research community has not fully utilized state-of-the-art MOO metaheuristics. More recent MOO metaheuristics could be used such as robust optimization and interactive optimization.     

A油气田公司安全文化评价指标体系初探

深入研究了国内外学者安全文化与安全文化评价指标体系相关成果,结合油气田企业的安全生产实际,从定量、定性分析两个方面构建了适合A油气田公司安全文化评价体系.同时采用层次分析法确定安全文化评价体系各指标的权重,结合专家定性评价、员工问卷调查、安全生产定量指标多种赋分方式,客观和全面的评价了油气田公司安全文化建设现状.评价结果对指导油气田企业安全文化建设和提升企业安全文化水平具有现实意义.     

Reconnecting crop and cattle farming to reduce nitrogen losses to river water of an intensive agricultural catchment (Seine basin,France): past,present and future

Nitrate and pesticide contamination of surface and groundwater has become a major problem in intensive farming regions in Europe, with nitrate concentrations reaching values above the standard defined in 2000 by the European Water Framework Directive. In the Seine basin, a major issue is the closure and abandonment of drinking-water wells, which force water managers and drinking-water producers to explore solutions for water resource protection. Organic farming has appeared as a credible alternative to conventional farming, and this study explores the potential of organic farming to reconcile agricultural production and water quality. On the basis of agricultural statistics, survey questionnaires and experimental data, the nitrogen soil surface balance (N-SSB) has been established at the scale of a small 104-km² catchment (The Orgeval sub-basin), representative of the intensive cash crop farming in the Seine basin. The N-surplus for arable land in specialized organic cash crop systems has been found to be half that of current conventional systems (15 kg N ha⁻¹ yr⁻¹ versus 30 kg N ha⁻¹ yr⁻¹, respectively). The N-yield in organic systems is 21% lower than in conventional systems, but total fertilization (mostly symbiotic N fixation) is also 26% lower. Whereas 2–3 years of forage legume (e.g., alfalfa) as a starter crop of the typical 7- to 10-year diversified rotation builds up N soil fertility and helps prevent weeds without pesticides, the existence of an outlet for this fodder production is a limiting factor for the economic sustainability and the environmental benefits of these farming systems. Therefore, we explored the possibility of a reconnection of livestock and crop farming systems in the Orgeval catchment, a traditional dairy farming and Brie cheese production region. We calculated the N-SSB for this type of a reconnected livestock and cropping system and found a value very close to the specialized organic cash crop system with full utilization of fodder production, leading to profitable animal production, essentially as milk in this farm design. This reconnected system is compared with the estimated situation in 1955 before separation of plant and livestock production. Furthermore, the N-SSB values were converted into infiltrating sub-root concentrations and used as a boundary condition to a biogeochemical model. Organic cropping and organic reconnected livestock cropping systems result in a 50% reduction of surface water nitrate concentrations, a surface water quality 20% better than that reconstructed for 1955, with an overall higher protein production.