Capturing fugitive methane emissions from natural gas compressor buildings

Fugitive methane emissions account for about 50% of the greenhouse gas (GHG) emissions from the Canadian conventional oil and gas sector. Sources include leaks in natural gas transmission facilities such as pipelines and compressor stations. There are three sources of methane emissions in a compressor station. The first is emissions resulting from incomplete combustion in the engine; the second is leaks in valves, flanges and other equipment in the building; and the third results from instrument venting. Fugitive methane emissions may be in low concentration relative to air, and thus cannot be destroyed by conventional combustion (below flammability limits of about 5-16%). The present study investigates the feasibility of capturing methane emissions from a compressor station. Computer modelling of the flow patterns of lean methane emissions inside the building is used to show the influence of doors, vents and leak location. Simulations show that for a typical building most fugitive methane exits through the ridge vent provided that the main doors remain closed. When the extraction rate through the ridge vent is controlled, the methane concentration is at acceptable levels for destruction in a catalytic flow reverse reactor, that is, in the range of 0.1-1% by volume.     

Modelling price fluctuations of ferrous scrap

This paper presents a model that analyses the interrelationships between markets of light non-flat steel products (such as concrete reinforcing bars) and iron and steel scrap, both of which are characterized by wide price fluctuations. The model, which was developed as a linear complementarity programming problem, seems to be robust in analysing unstable and simulataneous price movements of those markets. The model may be applied to other metal and scrap markets without substantial changes.     

建筑火灾模拟模型设计

数值模拟是火灾科学研究中的一种重要方法。本文描述了建筑火灾模拟模型的建模思想和方法，该思想可用于研究建筑火灾过程规律、新的火灾安全方案或策略的工作效果和经济性分析，模拟模型可以给系统性能和火灾防治经济性以定量说明。并对在建模中存在的问题进行了探讨．     

A decision support system for the implementation of the Water Framework Directive in the Netherlands: Process,validity and useful information

This paper discusses the development and use of the first version of the WFD Explorer (WFDE), a decision support system (DSS) for the implementation of the Water Framework Directive in the Netherlands. The paper's aim is to increase our understanding of the development process of DSSs and the impact the development process has on the perceived validity and usefulness of the DSS. In other words, whether the DSS is seen as representing reality correctly and as fit for purpose and user-friendly. Contrary to the expectations, the WFDE was not used much. Tensions in the development process over the intended users, the level of analysis, the level of ambition and the type of expertise to be included have contributed to doubts over its usefulness and validity. These tensions reflect general tensions in river basin management: different actors will prefer different approaches, and none of these is objectively the best. Whereas guidelines for the development of DSSs can increase awareness of these tensions, resolving these tensions is beyond the power of the developers to control. Guidelines have their use, but also their limitations, simply because they are general and circumstances differ from case to case.     

Assessment of emissions data for the Toronto region using aircraft-based measurements and an air quality model

An aircraft-based measurement campaign was conducted during the summer of 1996 in the vicinity of Toronto, Canada. The objective of the campaign was to assess the errors in a particular emission inventory used by three-dimensional air quality models. Measurements of NO₂ and hydrocarbons were made both upwind and downwind of Toronto, on days with strong synoptic-scale flow from a west to northerly direction. The chemical composition of the background airmass on these days was typical of unpolluted continental air. Measurements have been compared with the output from an on-line air quality model (MC2-AQ) run at 5 km resolution and suggest that emissions of NO_x from Toronto are well described in the emission database, though evidence that NO_x emissions are underestimated for suburban regions surrounding Toronto was found. In general, no significant underestimation of hydrocarbon emissions was found, though emissions of the model propane species, which includes acetylene and benzene, was underestimated by at least a factor of two.     

Reactive transport modelling of biogeochemical processes and carbon isotope geochemistry inside a landfill leachate plume

The biogeochemical processes governing leachate attenuation inside a landfill leachate plume (Banisveld, the Netherlands) were revealed and quantified using the 1D reactive transport model PHREEQC-2. Biodegradation of dissolved organic carbon (DOC) was simulated assuming first-order oxidation of two DOC fractions with different reactivity, and was coupled to reductive dissolution of iron oxide. The following secondary geochemical processes were required in the model to match observations: kinetic precipitation of calcite and siderite, cation exchange, proton buffering and degassing. Rate constants for DOC oxidation and carbonate mineral precipitation were determined, and other model parameters were optimized using the nonlinear optimization program PEST by means of matching hydrochemical observations closely (pH, DIC, DOC, Na, K, Ca, Mg, NH4, Fe(II), SO4, Cl, CH4, saturation index of calcite and siderite). The modelling demonstrated the relevance and impact of various secondary geochemical processes on leachate plume evolution. Concomitant precipitation of siderite masked the act of iron reduction. Cation exchange resulted in release of Fe(II) from the pristine anaerobic aquifer to the leachate. Degassing, triggered by elevated CO2 pressures caused by carbonate precipitation and proton buffering at the front of the plume, explained the observed downstream decrease in methane concentration. Simulation of the carbon isotope geochemistry independently supported the proposed reaction network.     

Biogeochemistry and isotope geochemistry of a landfill leachate plume

The biogeochemical processes were identified which improved the leachate composition in the flow direction of a landfill leachate plume (Banisveld, The Netherlands). Groundwater observation wells were placed at specific locations after delineating the leachate plume using geophysical tests to map subsurface conductivity. Redox processes were determined using the distribution of solid and soluble redox species, hydrogen concentrations, concentration of dissolved gases (N(2), Ar, and CH(4)), and stable isotopes (delta15N-NO(3), delta34S-SO(4), delta13C-CH(4), delta2H-CH(4), and delta13C of dissolved organic and inorganic carbon (DOC and DIC, respectively)). The combined application of these techniques improved the redox interpretation considerably. Dissolved organic carbon (DOC) decreased downstream in association with increasing delta13C-DOC values confirming the occurrence of degradation. Degradation of DOC was coupled to iron reduction inside the plume, while denitrification could be an important redox process at the top fringe of the plume. Stable carbon and hydrogen isotope signatures of methane indicated that methane was formed inside the landfill and not in the plume. Total gas pressure exceeded hydrostatic pressure in the plume, and methane seems subject to degassing. Quantitative proof for DOC degradation under iron-reducing conditions could only be obtained if the geochemical processes cation exchange and precipitation of carbonate minerals (siderite and calcite) were considered and incorporated in an inverse geochemical model of the plume. Simulation of delta13C-DIC confirmed that precipitation of carbonate minerals happened.     

基于DEMATEL-ISM的地下金属矿山人机系统事故影响因素分析

针对地下金属矿山人机系统的复杂性和动态性,基于人、机、环境、管理和信息5类事故致因,充分考虑各个因素之间的交互作用,确定地下金属矿山人机系统安全的15个重要影响因素,结合决策实验室分析法和解释结构模型对影响因素进行处理和分析,实现影响因素的层次划分。结果表明:人机系统中,人员各方面的知识更新慢和认知缺陷是根本原因;安全文化薄弱和非功能性交互是深层次原因;不确定性、信息交互受阻和系统结构脆性属于过渡致因;人为失误、人机约束失效、重复或遗漏控制、物质交互受阻、能量交互受阻和应变能力差是事故的近邻致因;机械物理部件失效和无事故事件通报对金属矿山人机系统安全性的影响相对较弱。     

The ecological basis for simulating phytoplankton responses to environmental change (PROTECH)

The theory and mathematical development of a model, called PROTECH, are presented. The model simulates the dynamic responses of up to eight species of phytoplankton to environmental variability in lakes and reservoirs. PROTECH models were developed originally to fulfil a commercial, decision-support role in the management of industrial water quality, where plankton growth is an issue. The progressive refinements to the model nevertheless have a robust ecological basis. This makes PROTECH a promising tool for researching plankton community ecology. The model calculates exponents describing growth and attrition, from a base of the maximum growth rates of algal species in culture. Subject to defined thresholds, growth integrates variability in the fluxes of light and nutrients. The paper develops this philosophy and its embodiment into the structure of the model. Examples of its authenticated, validated and sensitivity-tested outputs are presented.     

A steady state redox zone approach for modeling the transport and degradation of xenobiotic organic compounds from a landfill site

A redox zonation approach is used as a framework for obtaining biodegradation rate constants of xenobiotic compounds in a landfill plume (Grindsted, Denmark). The aquifer is physically heterogeneous in terms of a complex zonation of different geological units close to the landfill and biogeochemically heterogeneous in terms of a specified redox zonation. First-order degradation rates of six organic compounds (benzene, toluene, ethylbenzene, o-xylene, m/p-xylene, and naphthalene) were calculated in the methanogenic/sulfate- and Fe-reducing zones. The numerical simulations show that all compounds are anaerobically biodegraded, but at very different rates. High rates of biodegradation of most of the compounds (except benzene) were found in the Fe-reducing zone. These rates generally agree with previously published rates. Only o-xylene and toluene were significantly biodegraded in the methanogenic/sulfate-reducing environment. All rates in this redox zone are generally much lower than previously published rates.