污泥填埋场气体产量的预测方法研究

为有效利用污泥填埋场内产生的沼气,以上海白龙港污水处理厂污泥为例,对污泥填埋场中气体产生率及产生量进行了预测.应用元素的归一化摩尔化方法得到该污水处理厂污泥有机物的近似分子式为C28H52O16N4.用化学计量法和IPCC模型预测的甲烷气体产生潜能分别为60.6,61.7kg/t(以干重计).用动力学模型和IPCC模型预测的甲烷气体产生率分别为13.3,11.1kg/(t×a)(以干重计),2种方法计算的甲烷气体产生率的差别主要在于参数的取值不同,化学计量法和动力学模型法预测的气体产生量和产生率更能反映污泥填埋场实际的气体产生情况,应用IPCC模型更适合于从宏观角度估算一个地区或整个国家的填埋场产气量.     

半干法烟气脱硫系统中喷水调节阀的控制及选型

喷水流量的控制对半干法脱硫效率至关重要,通过分析喷水调节阀的控制对吸收塔温度的影响,表明该阀流量特性选择的重要性,并提出喷水调节阀的选型及计算方法。     

蜡染印花工艺废水处理设计及运行

设计运行了整个蜡染印花废水处理工程,皂化脱蜡废水松香回收新工艺,即采用两步调pH法-周边自重力进水法,回收率可达98%以上;机械洗蜡废水分流后经双级气浮处理,蜡回收率和处理水回用率可达90%以上;洗蜡废水经蜡回收后出水与其他废水混合后经初级混凝沉淀-水解酸化-好氧生化(A/O工艺)-辐流沉淀组合工艺处理,出水ρ(COD)均值约为130 mg/L,ρ(NH3-N)为3.36 mg/L,然后进入市政管网进行深度处理。     

规划环评中景观非生态功能影响评价实例

以景观概念作为融合自然与社会、科学与美学、理性与感性的结合点,研究了景观非生态功能的内涵及其评价技术理论框架,从景观功能中提炼出景观非生态功能概念,初步完成景观非生态功能评价指标体系的构建.评价技术体系设计突出环境影响评价中现状评价的客观性以及影响预测的科学性.以人感尺度下的评价对象——景观单元概念为创新点,该评价体系补充并完善了现有景观评价体系的技术链条,在保证评价精度的前提下,简化并规范了评价工作流程.该评价体系沿用现有环境影响评价所广泛采用的现状评价、影响源分析、影响预测评价及措施建议的技术思路,基本能满足现行技术规范的要求.以武汉市后官湖生态宜居新城规划环评为例,验证了该体系的可操作性,为我国规划环评在景观评价技术领域的发展提供理论和实践参考.      

Sensitivity analysis of North American bird population estimates

The Partners in Flight North American Landbird Conservation Plan provided estimates of population sizes for 448 landbird species using a multiplicative model. Input parameters in this calculation included the area of state × Bird Conservation Region polygons, area-specific mean Breeding Bird Survey counts circa 1995, and adjustment factors for the distance over which species may presumably be correctly counted, the assumed pairing of singing males with non-singing females, and variability in the propensity of birds to sing over the course of the survey day. I assessed the sensitivity of this population calculation to changes in the input parameters. I assessed both local and global sensitivity of the model to changes in the parameters with Monte Carlo one-at-a-time simulations and the Fourier amplitude sensitivity test (FAST). Monte Carlo simulations were an estimate of local model sensitivity whereas FAST estimated global model sensitivity, accommodating the potential shared variance between model parameters. Monte Carlo simulations suggested population estimates were 39% more sensitive to changes in the detection distance adjustment than to the other parameters; the other parameters were nearly equal in their contribution to model sensitivity. Conversely, FAST analysis determined that each of the input variables aside from the pair adjustment provided roughly equal contributions to variability in population estimates. The most efficient means for improving continental population estimates for birds surveyed by the Breeding Bird Survey will be through increased scrutiny of the species-specific distance detection and time-of-day adjustments and improved understanding in the spatial and temporal variability in the mean Breeding Bird Survey count.     

An Integrated Monte Carlo Methodology for the calibration of water quality models

This paper proposes an Integrated Monte Carlo Methodology (IMCM) to solve the parameter estimation problem in water quality models. The methodology is based on Bayesian approach and Markov Chain Monte Carlo techniques and it operates by means of four modules: Markov Chain Monte Carlo (MCMC), Moving Feasible Ranges (MFR), Statistical Analysis of the Joint Posterior Distribution (SAD) and Uncertainty Propagation Analysis (UPA). The main innovation of the new proposal lies in the combination of MCMC and MFR modules which provides the joint posterior distribution of the calibrated parameters following the classical Bayesian approach. While MCMC module, based on Shuffled Complex Evolution Metropolis (SCEM-UA) algorithm, is specially designed to sample complex joint posterior shapes within certain parameter ranges, the MFR readjusts these ranges until the coverage of the feasible parameter space is guaranteed. Once the joint posterior distribution is properly defined, the SAD provides the parameter statistics and the UPA performs an analysis of the uncertainty propagation through the model. The possibilities of the new proposal have been tested on the basis of a simple model featuring different activated sludge batch experiments. IMCM has been implemented in Matlab and it is prepared to be easily connected to any software package.     

状态空间法在省域主体功能区划中的应用——以湖南省为例

从资源环境承载力、开发密度和发展潜力等系统因素出发,确定了区域主体功能区划的指标体系,提出了基于状态空间理论的省域主体功能区划分的综合方法。以湖南省14个地级市(州)为基本空间单元,运用该方法进行了主体功能区类型划分。结果表明:除依法设立的各类自然保护区散布在各地级市外,属于省级重点开发或优化开发的区域主要分布在东部和中部地区,限制开发区则集中在西部地区。应用状况空间分析方法进行主体功能区划,能较好地反映区域的整体承载状况,为优化区域空间结构与布局,统筹区域可持续发展提供战略决策依据,并为我国主体功能区划提供理论方法参考。     

松辽流域生态流量赤字及其成因

水资源的过度开发导致了水短缺和水生态退化,因此,提供适宜的生态流量对维护河流健康具有重要意义.以往研究聚焦断面尺度的生态流量及其保障程度,尚未有效剥离上游子流域的影响.本研究以松辽流域为研究对象,运用VMF法、Tessmann-adapted法和Smakhtin-adapted法3种水文学法核算二级水资源区生态流量及1...     

分子筛孔结构对CO_2吸附性能的影响

采用巨正则蒙特卡罗方法模拟了CO_2在FAU分子筛上的吸附情况,比较了不同CO_2逸度下,CO_2在分子筛模型上的吸附位、吸附量的变化,拟合了其吸附等温线。结果表明:在吸附饱和状态下,分子筛的孔结构越大,对CO_2的吸附量越大,对于比CO_2分子更小的微孔结构,吸附几乎不发生;在低逸度下,CO_2的吸附主要发生在小孔内,随着逸度的提高,CO_2的吸附量迅速上升;在高逸度下,吸附量的提高主要发生在大孔内;FAU分子筛吸附CO_2的过程符合Ⅰ型Langmuir吸附等温线,在高压下对CO_2的吸附能力远大于低压下的吸附能力。     

Ergonomic Diagnosis of the Driver’s Workplace in an Electric Locomotive

This paper deals with research aimed at developing a method for ergonomic analysis of the driver’s workplace in an electric locomotive. It presents the structure of the diagnosis and its assumptions, and includes a re-evaluation of the questionnaire-expert method in ergonomic research. The article presents research data on weights and evaluations including their standard deviations for particular priority features. Ergonomic levels of the studied operator’s cabin in locomotives are compared.