杂多酸水溶液脱除烟气中SO2的性能研究

合成了H3PMo12O40、H4SiW12O40、H3PW12O40、H4PMo11VO40、H5PMo10V2O40和H6PMo9V3O406种杂多酸,分别采用红外光谱（FT-IR）和X射线衍射（XRD）表征杂多酸的结构,并采用气相色谱仪对6种杂多酸水溶液进行脱硫实验测试。实验结果表明：制备的6种杂多酸具有良好的Keggin型结构;H3PMo12O40、H3PW12O40和H4SiW12O40的3种水溶液中,磷钼杂多酸的脱硫性能最好,脱硫率在120 min时可达到16.38%;不同比例的多原子也会使杂多酸有不同的脱硫性能,脱硫性能顺序为：H6PMo9V3O40〉H5PMo10V2O40〉H4PMo11VO40;且6种杂多酸的脱硫稳定性的顺序为：H4PMo11VO40〉H6PMo9V3O40〉H3PMo12O40〉H5PMo10V2O40〉H4SiW12O40≈H3PW12O40。     

三苯类废气处理进展

综述了近年来三苯类废气处理所采用的方法,如吸收法、吸附法、催化氧化法、生物法、光催化法和低温等离子体法等,对各种方法的处理机理、处理效果以及优缺点进行了概括和分析,并指出联用技术将是未来的发展方向.     

制药废水有机污染物特性分析与处理

分析了某制药企业废水生物处理站进出水中有机污染物的相对分子质量分布和气相色谱—质谱图谱,提出了根据废水水质特性有针对性地确定制药废水处理工艺的新思路.实验结果表明:进出水中的有机污染物主要是相对分子质量小于1 000的物质,且主要来源于车间5排放的COD比重大、水量小的工段废水;采用旋转蒸馏预处理法处理车间5废水,可使...     

上海火电厂烟气脱硫现状分析与建议

介绍了上海火电厂烟气脱硫的现状,对脱硫工艺选择、脱硫效率进行了分析。阐明了我国烟气脱硫普遍选用的石灰石一石膏湿法脱硫的特点和局限性,探讨了建立SO2排污权交易制度的必要性和可行性,分析了烟气脱硫装置存在的问题及预防措施。     

尿素为还原剂燃煤烟气脱硝技术的研究与应用

尿素由于运输、储存安全性较高,作为还原剂进行脱硝备受关注。从工艺原理、系统组成和工程应用等方面,对尿素制氨选择性催化还原技术（SCR）、选择性非催化还原技术（SNCR）和尿素法三种脱硝方法进行了综述。分析了不同技术运用过程存在的问题,并提出解决措施。     

2×130t/h热电锅炉烟气脱硫工程调试及优化

分析了2×130t/h锅炉配套石灰石—石膏脱硫系统调试过程中出现的问题,提出了解决措施并对运行参数进行了优化。结果表明,在实际工况下,燃用中低硫煤,控制吸收塔液位为7.3m,pH值为5.4,投运2台循环泵时,脱硫系统运行最为经济有效。     

Fuel efficiency improvement of a dual-fuel engine fuelled with Honge oil methyl ester (HOME)–bioethanol and producer gas

Renewable and alternative fuels have numerous advantages compared with fossil fuels as they are renewable and biodegradable and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues (Yaliwal et al. 2013. International Journal of Sustainable Engineering, doi:10.1080/19397038.2013.801530. Zhu et al. 2011a, Applied Thermal Engineering 31 (14–15): 2271–2278; Zhu et al. 2011b, Fuel 90: 1743-1750; Banapurmath, Tewari, and Hosmath 2008, Renewable Energy 33: 2007-2018; Banapurmath 2009, “Performance, Combustion and Emission Characteristics of a Single Cylinder Direct Injection CI Engine Operated on Dual Fuel Mode Using Honge Oil and Producer Gas.” PhD thesis, 1–195; Banapurmath et al. 2011, Waste and Biomass Valorization 2: 1–11). In this context, the main objective of the present work is to study methods of biofuel production such as Honge oil methyl ester (HOME) using a conventional transesterification process and bioethanol from the Calliandra calothyrsus shrub using a new pretreatment method known as hydrothermal explosion. Further, experimental investigations were carried out on a single-cylinder, four-stroke, direct-injection stationary diesel engine operating in a dual-fuel mode using HOME, bioethanol and producer gas combinations to determine its performance, combustion and emission characteristics. The performance of the dual-fuel engine was analyzed at optimized engine conditions. HOME-Bioethanol (BE) blends such as HOME+ 5% bioethanol (BE5), HOME+ 10% bioethanol (BE10) and HOME+ 15% bioethanol (BE15) were prepared by adding bioethanol to HOME (on volume basis) in different proportions ranging from 5 to 15% with an increment of 5%. In this present work, the effect of different BE blends on the performance of producer gas fuelled dual fuel engine was studied. Experimental investigation on dual fuel engine using BE5-Producer gas operation resulted in up to 4–9% increased brake thermal efficiency with decreased hydrocarbon (HC), carbon monoxide (CO) and marginally increased nitric oxide (NOx) emission levels compared to HOME-Producer gas, BE10-producer gas and BE15-producer gas mode of operation. However, it was observed that, the overall performance of BE-producer gas operation was found to be lower compared to diesel-producer gas operation.     

Performance,combustion and emission characteristics of a single-cylinder,four-stroke,direct injection diesel engine operated on a dual-fuel mode using Honge oil methyl ester and producer gas derived from biomass feedstock of different origin

Renewable and alternative fuels have numerous advantages compared with fossil fuels, as they are renewable and biodegradable, and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues. In this context, present work was carried out to investigate the feasibility of alternative and renewable fuels derived from biomass feedstock of different origin for engine applications. The present study was also extended to study the effect of producer gas composition derived from different biomass feedstock on the performance, combustion and emission characteristics of a single-cylinder, four-stroke, direct injection stationary diesel engine operated on a dual-fuel mode using Honge oil methyl ester (HOME) and producer gas induction. The performance of the engine was evaluated with a constant injection timing of 27° before top dead centre, an injection pressure of 205 bar for the diesel–producer gas combination and 230 bar for the HOME–producer gas combination and a compression ratio of 17.5. The results showed that the performance of the dual-fuel engine varies with the composition of the producer gas and depends on the type of biomass feedstock used in the gasifier. Experimental investigations on the dual-fuel engine showed that brake thermal efficiency values for the engine operated using HOME–producer gas derived from babul, neem and honge woods were found to be 17.2, 14.3 and 11.56% respectively, compared to 23.8% for diesel–producer gas operation at 80% load. However, the results showed better engine performance with lower exhaust emission levels for the operation of HOME–producer gas derived from the ordinary or babul wood compared with the operation of that derived from the neem and Honge woods. In view of this, present study reveals that use of alternative and renewable fuels for dual fuel engine can be considered as an immediate solution for the development of rural areas and emergency use in the event of severe diesel fuel shortage.     

密相塔半干法烟气脱硫塔内加湿降温及其对脱硫效率的影响

为了实现密相塔半干法脱硫工艺的精确加湿进一步提高系统脱硫效率,利用推导出的传热传质计算方法,得到烟气温度降低和加水量的关系.结合3组密相塔半干法工程实际数据,发现理论计算值和实测值误差区间仅为2.9％ ～5.4％.通过选取河北某钢厂210 m2烧结烟气密相塔半干法脱硫项目实际在线检测数据,发现循环脱硫灰含湿量为3％的系统脱硫效率整体高于含湿量为5％和4％的样品,最大值达93.56％.通过粒度分析、扫描电镜、X射线衍射及差热-热重对2种不同含湿量的循环脱硫灰进行表征,结果表明,含湿量为3％的循环脱硫灰较含湿量为5％的样品粒径小、比表面积大,无团聚现象,物相分析还证实相对于含湿量为5％样品,其Ca(OH)2和结晶水含量少,几乎都是CaSO4和CaS03干态物质,因此脱硫反应进行彻底,脱硫效率较高.     

高炉瓦斯泥综合利用技术述评

瓦斯泥是高炉副产物,因其中富含锌,直接用于烧结会增加高炉锌负荷。在分析了瓦斯泥的矿物特征的基础上,综述了选矿法、化学浸出法、直接还原法等几种瓦斯泥有价成分的回收利用方法。选矿法根据碳、锌、铁的性质及赋存状态的差异分离各物质,具有工艺简单、成本低的优点,但分离不彻底、回收率低;化学浸出法使锌进入溶液而其他矿物不溶或微溶,分离效果较好,但处理量小,后续处理难度大;直接还原法是在高温下使瓦斯泥中的金属还原,锌蒸发后进入烟气,最终可得到含氧化锌较高的烟尘和含金属铁的脱锌瓦斯泥,该法适应性强、处理量大、分离效果好,是目前应用较为广泛的瓦斯泥处理方法,但其设备投资大。