Dynamic risk assessment for underground gas storage facilities based on Bayesian network

Loss of the underground gas storage process can have significant effects, and risk analysis is critical for maintaining the integrity of the underground gas storage process and reducing potential accidents. This paper focuses on the dynamic risk assessment method for the underground gas storage process. First, the underground gas storage process data is combined to create a database, and the fault tree of the underground gas storage facility is built by identifying the risk factors of the underground gas storage facility and mapping them into a Bayesian network. To eliminate the subjectivity in the process of determining the failure probability level of basic events, fuzzy numbers are introduced to determine the prior probability of the Bayesian network. Then, causal and diagnostic reasoning is performed on the Bayesian network to determine the failure level of the underground gas storage facilities. Based on the rate of change of prior and posterior probabilities, sensitivity and impact analysis are combined to determine the significant risk factors and possible failure paths. In addition, the time factor is introduced to build a dynamic Bayesian network to perform dynamic assessment and analysis of underground gas storage facilities. Finally, the dynamic risk assessment method is applied to underground gas storage facilities in depleted oil and gas reservoirs. A dynamic risk evaluation model for underground gas storage facilities is built to simulate and validate the dynamic risk evaluation method based on the Bayesian network. The results show that the proposed method has practical value for improving underground gas storage process safety.     

压缩空气泡沫在长距离管路输送中压降的数值模拟

基于Fluent对压缩空气泡沫在长距离管道中的流动特性进行了数值模拟研究,将压缩空气泡沫近似为弥散流,采用Saplart-Allmaras模型模拟了不同管径下压缩空气泡沫以及不同泡沫原液浓度的AFFF泡沫在长距离管道内的流动及压降变化。模拟结果表明,随着距离变化,各管径管道内压降均呈现线性变化,且随着压缩空气泡沫的流动,压降线性增大。管道管径对管内压降变化具有显著影响,管道直径越小,管道内压降越大;泡沫原液浓度对压降的影响较小,且压缩空气泡沫在长距离输送中的压力随距离线性衰减。将模拟结果与长距离输送的试验结果进行了对比,误差在10%以内。     

Integrating long-term stewardship goals into the remediation process: natural resource damages and the Department of Energy

The United States and other developed countries are faced with restoring and managing degraded ecosystems. Evaluations of the degradation of ecological resources can be used for determining ecological risk, making remediation or restoration decisions, aiding stakeholders with future land use decisions, and assessing natural resource damages. Department of Energy (DOE) lands provide a useful case study for examining degradation of ecological resources in light of past or present land uses and natural resource damage assessment (NRDA). We suggest that past site history should be incorporated into the cleanup and restoration phase to reduce the ultimate NRDA costs, and hasten resource recovery. The lands that DOE purchased over 50 years ago ranged from relatively undisturbed to heavily impacted farmland, and the impact that occurred from DOE occupation varies from regeneration of natural ecosystems (benefits) to increased exposure to several stressors (negative effects). During the time of the DOE releases, other changes occurred on the lands, including recovery from the disturbance effects of farming, grazing, and residential occupation, and the cessation of human disturbance. Thus, the injury to natural resources that occurred as a result of chemical and radiological releases occurred on top of recovery of already degraded systems. Both spatial (size and dispersion of patch types) and temporal (past/present/future land use and ecological condition) components are critical aspects of resource evaluation, restoration, and NRDA. For many DOE sites, integrating natural resource restoration with remediation to reduce or eliminate the need for NRDA could be a win-win situation for both responsible parties and natural resource trustees by eliminating costly NRDAs by both sides, and by restoring natural resources to a level that satisfies the trustees, while being cost-effective for the responsible parties. It requires integration of remediation, restoration, and end-state planning to a greater degree than is currently done at most DOE sites.     

CuSnZr三元催化剂应用于NTP强化催化脱硫过程的特性

为高效地在低温下处理大量低浓度电解铝烟气, 采用浸渍法制备了Sn Zr型金属氧化物并添加Cu作为助剂的催化剂, 并首次测试了它在低温等离子体(NTP)技术上的脱硫效果, 结果表明负载了20wt% Cu老化温度为40℃的催化剂表现出最佳的脱硫性能.并对强化之后的催化剂进行了表征, 与新鲜的催化剂对比, X射线衍射分析(XRD)结果表明放电对催化剂晶型基本不产生影响; 扫描电子显微镜(SEM), 氮吸附和脱吸(BET)表明放电会使催化剂的吸附脱附能力与孔道结构有较大提升; X射线光电子光谱(XPS)也表明放电会使催化剂表面元素价态变化, 从而使其氧化还原性能改变, 反应路径发生偏向; 催化剂性能理论计算表明铜含量的上升会导致催化剂能带结构改变, 更好利用于激发气体.     

指数模型法在海洋石油设施风险评估中的应用

针对海上油气设施工况复杂、自然环境恶劣、应急救援难度大等特点,通过构建海上采油平台、海底管道和钻修井平台风险评估指数模型,辨识出水深增大、服役期长、腐蚀、疲劳、浅层地质条件变化等是风险等级升高的主要因素,识别出部分采油平台主结构疲劳损伤,海底管道内壁腐蚀及缺陷无法准确掌握、作业平台插桩不到位等问题,并提出检验检测、更换设施、强制退出等风险管控措施和建议。     

液化石油气槽车泄漏处置专用接头套组的应用探讨

针对消防救援车辆缺乏专业堵漏和倒罐装备、应急处置受限等问题,研究采用专用注压接头套组与消防车配合,通过向事故槽车阀门注水加压或惰性气体的方式实施辅助堵漏,能够实现因地制宜、快速有效地解决现场液化石油气大量泄漏的问题,降低事故危害。     

战斗部飞行可靠性评估方法研究

目的 解决高可靠、小子样战斗部飞行可靠性评估时样本量不满足标准要求的问题。方法 通过对战斗部结构功能分析,建立包含壳体强度、主装药安定性及主装药正常起爆等单元的可靠性框图,并利用L-M法对战斗部系统进行可靠性评估。首先利用基准设计许用值的安全系数法将应力强度干涉模型与安全系数进行结合,对壳体强度可靠性进行评估;然后结合战斗部试验数据,利用最大熵试验法,在小样本下评估战斗部主装药安定性及正常起爆的可靠性;最后,将各单元的可靠性数据转化为成败型数据进行分析,利用L-M法,结合战斗部整机试验数据,开展战斗部飞行可靠度评估。结果 分别计算了小子样下战斗部壳体和装药安定性及正常起爆的可靠度,并将其转换为等效成功数和等效失败数,结合战斗部试验打靶等可靠性信息,综合评估了战斗部飞行可靠度。结论 充分利用战斗部在研制阶段的试验信息进行评估,减少了样本量,解决了战斗部可靠性高、样本量小的评估难题。     

单兵信息系统装备可靠性评估方法研究

首先介绍了士兵系统在环境适应性、信息安全、作战适应性、使用寿命等方面的需求,提出了一种可靠性设计方法,可有效解决单兵多模块信息系统可靠性评估问题,大幅提升士兵信息系统的设计效率。同时以典型士兵信息系统为例,进行了士兵结构可靠性、电气可靠性设计。     

民用飞机实验室APU开车高温尾气排放影响因素分析

目的 对民用飞机APU在气候实验室内开展极端气候环境下的起动和工作试验,建立一种APU高温尾气安全排放方法。方法 用CFD仿真手段对采用排气管道将APU高温尾气排出气候实验室的可行性及影响因素(包括管道直径、距离、背压等)进行系统性分析研究。结果 气管道入口距离APU管道出口过近时,将有利于APU排气,引射比ε与排气管道出口压力Pex及排气管道直径D线性相关,排放温度tex与管道直径D成反比。在排气管道入口设置平滑收敛段,利于消除涡流,减轻负压程度,并在一定范围内提高引射比。结论 采用管道被动排气是可行的,合适的排气管道设计为D/d=2.0,L/d=1.5,并在管道入口设置平滑收敛段。     

极端梯度提升与随机森林融合的天然气露点预测方法

目的 解决目前水露点数据多为人工采用测量仪器测得,时效性低且成本高昂的问题。方法 建立一种基于极端梯度提升(XGBoost)和随机森林(RF)的天然气水露点预测方法。采用XGBoost方法对所有监测工艺参数进行分析,筛选出主要影响水露点的关键工艺特征参数,以排除无关特征参数对预测的干扰。建立RF预测模型,输入关键特征集参数,实现对水露点的实时预测。以重庆气矿某脱水监测系统监测数据与生产数据为例,对所提预测方法进行对比分析验证。结果 相较于XGBoost、SVM等预测方法,RF模型具有最佳的预测性能,且经过XGBoost特征选择后,RF预测结果的MAE值降低了0.016 9 ℃,RMSE值降低了0.014 6 ℃。结论 基于极端梯度提升与随机森林融合的水露点预测方法具有更优的预测精度与鲁棒性,对指导脱水现场生产具有积极作用。