海上溢油扩散图像处理的非线性方法研究

针对海上溢油应急处理问题,本文主要对溢油的初级行为--扩散进行探讨.提出了采用溢油扩散图像来预测溢油扩散未来发展趋势的3步非线性处理过程,即图像边缘检测、面积计算和面积预测,对这一过程中应采用的方法进行了分析与比较.并以奥里油在静止海水中扩散为范例,在MATLAB环境下,利用非线性方法对扩散图像进行边缘监测,通过对梯度算子阀值的调整来计算完整的油膜覆盖面积,并将其计算结果进行BP神经网络预测.结果表明:采用Roberts边缘算子可以得到很好的边缘检测结果,采用BP神经网络获得的面积预测结果与实验结果吻合程度较好.     

基于仿真的新建污水处理厂工艺参数调试

基于ASM2D模型建立了上海某新建污水厂倒置AAO流程的数学模型,并采用该厂进、出水设计数据对模型进行校正,其中,ASM2D各组分浓度分布参考文献值.同时,通过仿真计算研究了不同温度下进水流量、污泥回流比、混合液回流比及进水流量分配比对出水总化学需氧量（TCOD）、氨氮（SNH3）、总氮（TN）、总磷（TP）及总悬浮颗粒物（TSS）的影响.结果表明,研究获得的定性和定量两方面结果可供该厂在工艺参数调试中作参考.计算机仿真技术在新建污水厂工艺参数调试中的应用可以减少调试时间,降低调试费用,取得良好的经济效益与环境效益.     

工艺安全管理系统的适用范围——危险化学品目录及临界量的确定

从工艺安全管理（PSM）的角度,对美国、欧盟等的工艺安全管理系统适用范围的定义进行分析,结合目前国内《重大危险源辨识》中给出的部分危险化学品的临界量,以此为基础制定适合我国国情的危险化学品目录并确定各物质的临界量,提出在我国推行工艺安全管理系统的建议。     

CASS工艺用于建筑小区污水处理及中水回用

CASS工艺自身的优点以及建筑小区污水处理的特点,决定了CASS工艺在建筑小区污水处理及中水回用中的优势地位。详细阐述了CASS工艺的原理、运行控制过程中的主要问题以及主要的设计参数。     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

仓面浇筑立体空间冲突致灾过程建模与伤害评价*

为定量评价大坝浇筑过程空间冲突致灾事故后果,通过对缆机运输典型情景进行危害能量运动分解,确定在水平和竖直方向运动方式,阐述危害能量在流动路径相互转化形式;根据能量守恒定律,分析危害能量在吊罐与承灾体碰撞接触之间转移规律,将吊罐与人头部接触过程抽象为带强阻尼的弹簧振子系统,建立危害能量与碰撞冲量相等的动量方程,量化空间冲突致灾后果。结果表明:吊罐坠落危害能量极大,产生的碰撞冲击力与吊罐的运输速度、高度呈正相关,与阻力系数呈负相关,风速、载重对其影响较大。对比2种不同碰撞情景发现,机械碰撞因顶部承载力缓冲,对人头部产生伤害远小于直接碰撞,并对碰撞结果分级评价,研究结果可为大坝浇筑交叉作业空间冲突致灾风险评价提供参考。     

取芯过程中煤芯温度分布特征模拟研究*

针对取芯过程瓦斯解吸受煤芯的温度影响不明,造成煤层瓦斯含量测不准的问题,开展对取芯过程煤芯温度分布特征研究。采用自主研制的取芯管自动测温装置在赵固二矿原生结构煤层（f=1.71）进行深度20 m的取芯试验,获得取芯管管壁温升变化规律,变化曲线分为4个阶段:缓慢上升、加速上升、减速上升、缓慢下降阶段;应用COMSOL建立含瓦斯煤传热模型,将管壁的温度变化设置为边界条件,模拟取芯过程煤芯与管壁之间的热交换。结果表明:在取芯时间30 min内,煤芯平均温度快速上升,之后上升速度趋于平稳;在煤芯内,相同时刻,等间距的轴向与径向距离,径向较轴向的温度梯度较大,径向传导快于轴向传导;取芯过程煤芯径向温度Ta与径向距离d、时间t满足指数函数关系。研究结果可为测定取芯过程煤芯的瓦斯损失量提供参考依据。     

A~2/O联合臭氧污泥减量技术的改造研究

研究了臭氧化污泥减量技术联合A~2/O、倒置A~2/O与传统A~2/O在出水和污泥产率上的变化。结果表明,臭氧化A~2/O、臭氧化倒置A~2/O的出水与传统A~2/O相比未出现恶化,它们对COD和含氮物质的去除率分别为87.4%,53.7%和93%,66.5%,存在倒置A~2/O对臭氧混合液中有机质及含氮物质的利用率较A~2/O高的可能。试验按每克SS投加0.05 g O_3对A2/O与倒置A~2/O产生的约60%剩余污泥处理时,在短期内未造成出水磷含量的大幅升高,并且出水磷含量受臭氧混合液DO、二沉池底部DO的影响,两系统的污泥产率分别较传统A~2/O降低50%,56%。     

喷淋工艺处理PVC塑料生产废气

采用喷淋工艺处理PVC塑料生产废气,将专利的吸收液与改型的喷淋塔相结合,在中试成功的基础上进行了实际工业化应用。应用结果表明:采用该工艺处理某PVC塑料生产企业的生产废气,吸收液在喷淋塔循环液中所占体积分数为15%时,废气中各污染物指标的去除率达85%以上,对于难处理的苯系物也能较好地去除;处理后废气中各污染物指标的含量满足GB 14554—1993《恶臭污染物排放标准》和DB 44/27—2001《大气污染物排放限值》的要求;该工艺装置运行费用较低,仅为电费和少量药剂费用,吸收液可循环使用,设备保养及维护简单,可满足市场需求。     

Model experiment on the dynamic process of oil leakage from the double hull tanker

This paper presents an experimental investigation on oil leakage from the double hull tanker (DHT). It is designed to explore the dynamic process of oil leakage from bottom-rupture hole of DHT. The experimental test shows the leakage resistance mechanism of ballast tank space. The behavior of oil leakage from damaged DHT and dynamic features of flow in the overall process are demonstrated from experimental results. The overall process of oil leakage is divided into free-leakage and resistance-leakage stage according to the corresponding power to study the dynamic features of oil-water flow inside or outside the tank. The corresponding dominated factors of oil leakage in different stage are also pointed out, and the unsteady Bernoulli’s equation is used to verify experimental results. Meanwhile, viscous effect in leakage process is discussed and the importance of hydrodynamic features associated with the mechanism of oil leakage is explored from experimental results.