基于ISM的建筑施工高处坠落事故致因分析

高处坠落是建筑工程事故统计中发生频率最高的一类事故,会造成极大的人员伤害和经济损失。通过分析123例典型高处坠落事故调查报告,采用关键词检索抽取出19种导致该类事故发生的致因要素;针对一般事故和较大事故分别对致因要素发生频率进行了统计,得出一般事故中人的因素更关键,较大事故中物的因素更关键。采用ISM模型进一步分析致因要素间的作用关系,构建了7个层级的高处坠落致因要素解释结构模型;对不同层级要素进行分析,发现其与频率度量有良好的一致性,最后得出行政监管和违法承发包两个致因要素是事故发生的深层原因。     

2002-2014年我国煤矿重特大事故特征及发生规律研究

为了研究我国煤矿重特大事故的一般规律,分析了2002-2014年我国煤矿发生的421起重特大事故,得到我国煤矿重特大事故的基本特征.利用统计分析法从地域、类型、所有制3个维度综合分析了421起煤矿重特大事故.结果表明:山西、贵州、河南、黑龙江和湖南5个省份的重特大事故起数和死亡人数分别占全国总数的56.1％和56.8％,是我国需重点监管和治理的省份,并对山西、河南和黑龙江3省重特大事故频发的原因进行了分析;瓦斯事故和水害事故的发生起数及死亡人数占比分别为83.3％和86.3％,是需要重点防治的事故类型;国有重点煤矿重特大事故平均每起死亡人数为29.87,且近两年重特大事故起数和死亡人数均大幅度上升,是需要重点防范的对象;乡镇煤矿重特大事故起数及死亡人数下降速度均较快,但事故起数和死亡人数仍较多,是国家重点监控、治理的对象.     

Assessment of patients' medical fitness to drive by primary care physicians: A cross-sectional study

Objectives: Motor vehicle collisions (MVCs) are a significant health burden in Saudi Arabia. The literature has consistently indicated that chronic medical conditions, such as diabetes, heart disease, stroke, obstructive sleep apnea, and neurodevelopmental disorders, increase the risk of MVCs. Therefore, assessment of driver fitness by primary care physicians (PCPs) remains a major health intervention that might reduce MVCs. We studied the practices of PCPs in assessing medical fitness to drive in at-risk patients.

Methods: We conducted a cross-sectional study of all 88 government-funded primary care centers in the city of Riyadh, Saudi Arabia. We administered a self-reported questionnaire to PCPs that inquired about their driving risk assessment for specific medical conditions.

Results: Among all PCPs and centers, 189 PCPs (63%) from 74 centers (84%) participated in our survey. The mean age of the PCPs was 40 ± 10 years, and 108 (57%) were men. The average clinical experience of the group was 13 ± 9 years. Fewer than half of PCPs considered diabetes mellitus (45%) and obstructive sleep apnea (46%) as potential risks for MVCs. Approximately 45% of PCPs did not notify any authority or relatives of potential driving issues that they noticed in their patients. Only 15% of the participants believed that PCPs were responsible for alerting authorities about their fitness to drive.

Conclusions: PCPs did not adequately assess their patients' driving history and eligibility. Efforts are needed to improve awareness among PCPs regarding the effects of chronic medical conditions on driving.     

Determination of emergency assembly point for industrial accidents with AHP analysis

Major industrial accidents, which are a type of technological disaster, are very important due to the security risks and financial damages that threaten the environment and human health in today's industrialization. In this study, it was aimed to propose an approach that will guide the decision makers to choose the emergency assembly point that should be in the distance or shelter where the employees will be not affected by the negative consequences of emergencies within the scope of the obligation of industrial establishments preparing an internal emergency plan for major industrial accidents. For this purpose, in the first stage, modelling studies were carried out with ALOHA (Areal Locations of Hazardous Atmospheres) Software over possible accident scenarios in an industrial establishment containing different types and amounts of hazardous chemicals. As a result of modelling studies, possible toxic emissions, fire and explosion effect distances and threat zones for the industrial establishment were obtained. In the second stage, the weights of the main and sub-selection criteria to be used in determining the assembly point were calculated. This stage was carried out based on the comparison data obtained as a result of the questionnaire applied to professionals with the help of AHP (Analytic Hierarchy Process) method, which is one of the multi-criteria decision making methods. In the last stage, three candidate points were selected considering the physical effect areas determined in the first stage in the boundaries of the establishment, where the employees were evaluated to be affected the minimum from the negative consequences of industrial accidents. These candidate points were evaluated again with the AHP method on the basis of the sub-criteria whose relative weights were determined in the second stage and a selection was made. As a result, an approach that provides the solution of our problem was obtained.     

Trends in occupational injuries and fatality in Turkey

Introduction. The aim of this study was to evaluate the trend of occupational injuries in Turkey using epidemiologic criteria such as incidence mortality and fatality/all injuries recorded – rates. Materials and methods. Safety and health data were obtained from the Annual Statistic Books of the Social Insurance Institution (1988–2006) and Social Security Institution (2007–2011) of Turkey. Results. The results from the official data showed that although total employment is increasing the number of occupational injuries and incidence and mortality rates are decreasing. The results also demonstrate that occupational fatality/all injuries recorded – rate is increasing. The fatality/all injuries recorded – rate per 1000 injuries increased to 25.5 in 2011 from 8.6 in 1988. Each work day an average of five people died because of occupational injuries. Discussion and conclusions. The fatality/all injuries recorded – rate (the number of fatal cases per 1000 occupational injuries) is an important indicator of the injury rate for a country. Systems of occupational injury and illness surveillance constitute a critical resource for the management and reduction of occupational injuries and illness.     

Allometric scaling and accidents at work

Allometry is the knowledge concerning relations between the features of some beings, like animals, or cities. For example, the daily energy rate is proportional to a mass of mammals rise of 3/4. This way of thinking has spread quickly from biology to many areas of research concerned with sociotechnical systems. It was revealed that the number of innovations, patents or heavy crimes rises as social interaction increases in a bigger city, while other urban indexes such as suicides decrease with social interaction. Enterprise is also a sociotechnical system, where social interaction and accidents at work take place. Therefore, do these interactions increase the number of accidents at work or, on the contrary, are they reduction-driving components? This article tries to catch such links and assess the allometric exponent between the number of accidents at work and the number of employees in an enterprise.     

Underground parallel pipelines domino effect: An analysis based on pipeline crater models and historical accidents

This paper focuses on the analysis of the possibility of domino effect in underground parallel pipelines relying on historical accident data and pipeline crater models. An underground pipeline can be considered as safe following an accident with an adjacent gas or liquefied pipeline when it remains outside the ground crater generated. In order to prevent the domino effect in these cases, the design of parallel pipelines has to consider adequate pipeline separations based on the crater width, which is one of the widely used methods in engineering applications. The objective of this work is the analysis of underground petroleum product pipelines ruptures with the formation of a ground crater as well as the evaluation of possible domino effects in these cases. A detailed literature survey has been carried out to review existing crater models along with a historical analysis of past accidents. A FORTRAN code has been implemented to assess the performance of the Gasunie, the Batelle and the Advantica crater models. In addition to this, a novel Accident-Based crater model has been presented, which allows the prediction of the crater width as a function of the relevant design pipeline parameters as well as the soil density. Modifications have also been made to the Batelle and Accident-Based models in order to overcome the underestimation of the crater width. The calculated crater widths have been compared with real accident data and the performance evaluation showed that the proposed Accident-Based model has a better performance compared to other models studied in this work. The analysis of forty-eight past accidents indicated a major potential of underground parallel pipelines domino effect which is proven by two real cases taken from the literature. Relying on the investigated accidents, the crater width was smaller than or equal to 20 m in most cases indicating that the definition of underground pipeline separations at around 10 m would be sufficient to ensure a small probability of the domino effect.     

金属材料对放射性核素的屏蔽性能研究

目的为应对在核反恐以及核应急中屏蔽体对放射性核素的监测和识别干扰,对金属材料屏蔽体的放射性核素屏蔽性能进行研究。方法选用三种不同壁厚、材质的金属作为屏蔽体,探测它们对同一放射源的屏蔽作用。结果发现研究中的几种金属材料屏蔽体对200 ke V以下的gamma射线均具有较强的屏蔽作用,尤其对于低强度射线,经屏蔽体后几乎无法检测到。同一材质金属,其屏蔽性能与壁厚成正比,但是4 mm铝筒的屏蔽效果比3 mm钢筒的屏蔽效果有时候还差。结论在实际场景放射性核素探测识别中,应充分考虑到不同材质和不同壁厚的屏蔽体对射线的吸收影响,从而快速检测和识别放射性核素。这对核反恐和核应急过程中的监测有特别的现实意义。     

Validation of the operational emergency response model at the Swedish Meteorological and Hydrological Institute using data from etex and the chernobyl accident

The Eulerian atmospheric tracer transport model MATCH (Multiscale Atmospheric Transport and Chemistry model) has been extended with a Lagrangian particle model treating the initial dispersion of pollutants from point sources. The model has been implemented at the Swedish Meteorological and Hydrological Institute in an emergency response system for nuclear accidents and can be activated on short notice to provide forecast concentration and deposition fields.The model has been used to simulate the transport of the inert tracer released during the ETEX experiment and the transport and deposition of ¹³⁷Cs from the Chernobyl accident. Visual inspection of the results as well as statistical analysis shows that the extent, time of arrival and duration of the tracer cloud, is in good agreement with the observations for both cases, with a tendency towards over-prediction for the first ETEX release. For the Chernobyl case the simulated deposition pattern over Scandinavia and over Europe as a whole agrees with observations when observed precipitation is used in the simulation. When model calculated precipitation is used, the quality of the simulation is reduced significantly and the model fails to predict major features of the observed deposition field.     

江苏沿海地区化工事故时空变化分析与对策研究

统计汇总了2006—2009年江苏沿海地区发生的化工事故,分析事故发生的时间趋势、空间分布、事故原因、死亡人数以及类型等特点。结果表明:事故发生频次稳定,增长趋势不明显。71%的事故发生于园区内,29%的事故发生在分散企业。连云港事故主要发生于沿海化工区密集带,盐城事故主要分布于沿海化工区域,少数发生在内陆地区,南通事故发生地点较为分散。总体来看,江苏沿海地区化工事故具有数量多,影响广,造成的环境经济损失较大的特点。