车用燃料环保管理——《2013年中国机动车污染防治年报》（第V部分）

环境保护部日前发布《2013年中国机动车污染防治年报》,公布了2012年全国机动车污染排放状况。本期“研究成果展示”专栏以六篇形式连载。本文刊载关于车用燃料环保管理的内容,以飨读者。该年报指出。2012年,全国实施车用汽油国Ⅲ阶段标准,硫含量不超过150ppm。按照国家强制性标准《车用汽油》（GB17930—2011）要求,自2014年1月1日起,全国实施车用汽油国IV阶段标准,硫含量不超过50ppm。2012年,我国车用柴油生产和销售执行《车用柴油》（GB19147—2009）标准和《普通柴油》（GB252—2011）标准。按照规定,车用柴油硫含量不得超过350ppm,2013年7月1日后普通柴油硫含量将不得超过350ppm。在已发布第四阶段车用汽油标准（硫含量不大于50ppm）的基础上,由国家质检总局、国家标准委尽快发布第四阶段车用柴油标准（硫含量不大于50ppm）,过渡期至2014年底;2013年6月底前发布第五阶段车用柴油标准（硫含量不大于10ppm）,2013年底前发布第五阶段车用汽油标准（硫含量不大于10ppm）,过渡期均至2017年底。加快国内炼油企业升级改造,确保按照汽、柴油标准升级实施时间如期供应合格油品。2012年环境保护部发布的《关于加强储油库、加油站和油罐车油气污染治理工作的通知》指出,按照国务院批复的《重点区域大气污染防治“十二五”规划》要求,列入大气污染防治“重点控制区”的地区,应限时完成加油站、储油库、油罐车的油气回收治理;大气污染严重的地区可根据本地实际,提前完成油气污染治理工作。     

基于城市功能区划分的道路机动车大气污染物排放清单研究——以厦门市海沧区为例

道路机动车尾气排放是造成城市近地面空气污染的主要原因之一,建立基于城市功能区划分的道路机动车大气污染物排放清单对改善中观尺度的城市空气质量具有重要辅助作用.本文以厦门市海沧区为例,基于城市功能区划分方法,结合各功能区内监测道路的机动车通行量实测数据,建立道路机动车大气污染物排放清单,并分析各功能区道路机动车大气污染物排放特征.结果发现,海沧区道路机动车尾气排放物中CO的排放贡献率最高,工业区和居住区的道路机动车大气污染物排放量对海沧区的空气污染贡献率最大,海沧区夜间大气污染物的主要排放源来自于工业区道路机动车大气污染物排放;生态服务区及公共管理与公共服务区的道路机动车排放特征受相邻工业区机动车大气污染物排放的影响较为显著.研究表明:城市功能区分布欠合理是导致道路机动车大气污染物高排放量的重要原因之一;基于城市功能区划分构建道路机动车大气污染物排放清单的研究方法,不仅可为中观尺度下的城市大气污染排放情况提供有效的调查途径,而且能为城市功能格局的合理规划提供重要的理论依据.     

周口店地质遗迹保护现状分析及对策建议

周口店地区地质遗迹丰富,在考古界和地质界都拥有极高的地位.通过实地考察,发现目前的保护中存在很多问题,如开山采石破坏了有价值的地质遗迹、众多水泥厂排放的烟尘污染了空气等,笔者针对存在的问题,提出了加强立法、严格执法、保护第一、积极开发、充分发挥其旅游文化价值等一系列方案措施;对比较典型突出的问题,提出了具体解决方案,希望以此唤起社会的进一步重视,以更好保护这一人类共有的财富.     

事故车辆影响下的城市三车道道路交通流仿真

为探究事故车辆对城市三车道道路交通影响机制,首先,分析考虑事故车辆的城市三车道道路交通流特征;然后,构建左车道优先且考虑主动抢道和被动抢道行为的元胞自动机交通流模型;最后;研究事故持续时间td变化时事故车辆分别位于M道和R道的城市道路交通流演化.结果 表明:事故车辆会形成交通瓶颈,呈现上游车辆聚集下游车辆稀疏的时空特征...     

基于无人机多传感吊舱系统的火点实时定位方法

林火定位是林火智能监测设备的核心技术。提出了一种基于激光雷达、红外热像仪及组合惯导多数据融合的火点定位方法。首先设计了一个通用的无人机吊舱系统,并基于ROS框架实现数据采集、数据处理和数据传输等功能;其次提出了一个基于无人机吊舱系统的火点全局定位方案,根据红外热像仪成像特性识别火点,同时将密集点云与红外图像进行数据融合,估计出火点的三维空间位置;然后根据无人机位姿提出了一种基于墨卡托投影的火点全局定位方案,得到了火点的GPS位置。最后通过试验得到了该方案的全局定位精度：在实验中经度最大误差为2.36×10^-5°,纬度最大误差为1.84×10^-5°,高程最大误差为0.926 1 m,为其他林火定位方案提供了技术支持。     

Effect of soil moisture dynamics on dense nonaqueous phase liquid (DNAPL) spill zone architecture in heterogeneous porous media

The amount, location, and form of NAPL in contaminated vadose zones are controlled by the spatial distribution of water saturation and soil permeability, the NAPL spill scenario, water infiltration events, and vapor transport. To evaluate the effects of these processes, we used the three-phase flow simulator STOMP, which includes a new permeability-liquid saturation-capillary pressure (k-S-P) constitutive model. This new constitutive model considers three NAPL forms: free, residual, and trapped. A 2-D vertical cross-section with five stratigraphic layers was assumed, and simulations were performed for seven cases. The conceptual model of the soil heterogeneity was based upon the stratigraphy at the Hanford carbon tetrachloride (CT) spill site. Some cases considered co-disposal of NAPL with large volumes of wastewater, as also occurred at the Hanford CT site. In these cases, the form and location of NAPL were most strongly influenced by high water discharge rates and NAPL evaporation to the atmosphere. In order to investigate the impact of heterogeneity, the hydraulic conductivity within the lower permeability layer was modeled as a realization of a random field having three different classes. For six extreme cases of 100 realizations, the CT mass that reached the water table varied by a factor of two, and was primarily controlled by the degree of lateral connectivity of the low conductivity class within the lowest permeability layer. The grid size at the top boundary had a dramatic impact on NAPL diffusive flux just after the spill event when the NAPL was present near the ground surface. NAPL evaporation with a fine grid spacing at the top boundary decreased CT mass that reached the water table by 74%, compared to the case with a coarse grid spacing, while barometric pumping had a marginal effect for the case of a continuous NAPL spill scenario considered in this work. For low water infiltration rate scenarios, the distribution of water content prior to a NAPL spill event decreased CT mass that reached the water table by 98% and had a significant impact on the formation of trapped NAPL. For all cases simulated, use of the new constitutive model that allows the formation of residual NAPL increased the amount of NAPL retained in the vadose zone. Density-driven advective gas flow from the ground surface controlled vapor migration in strongly anisotropic layers, causing NAPL mass flux to the lower layer to be reduced. These simulations indicate that consideration of the formation of residual and trapped NAPLs and dynamic boundary conditions (e.g., areas, rates, and periods of different NAPL and water discharge and fluctuations of atmospheric pressure) in the context of full three-phase flow are needed, especially for NAPL spill events at the ground surface. In addition, NAPL evaporation, density-driven gas advection, and NAPL vertical movement enhanced by water flow must be considered in order to predict NAPL distribution and migration in the vadose zone.     

汽车整车自然暴露试验评价方法前期研究

主要介绍汽车整车自然暴露试验评价方法,基于整车厂长期进行汽车整车自然暴露试验,对整车进行表观检测、性能检查及其他项目检测,通过分析试验结果,归纳汽车内外饰件常见缺陷,按照失效程度和不同部件类型,为整车耐候性进行等级划分,建立整车系统化评价方法。     

基于整车道路强化腐蚀试验的工况探讨

试验工况是否科学,可以通过对国内外常用试验方法的工况进行对比,发现其存在的差异性及侧重点,并通过调研对试验工况数据切合度进行验证。只有制定出合理的试验工况,才能为腐蚀数据库提供科学的数据支持。     

Identifying and modeling key trade-offs between hydrogen fuel cell and electric vehicles

Through a sensitivity analysis, the trade-off between vehicle range and CO₂ emissions is investigated as a function of electric emissions coefficient. Various powertrains were analysed for use in a small crossover sport utility vehicle. Gasoline, gasoline electric hybrid, diesel, fuel cell and battery electric vehicles (BEVs) were considered. Using various upstream fuel pathways and a model for vehicle performance, emissions and energy use were estimated. The hydrogen fuel cell vehicle was found preferable to BEVs under conditions of high CO₂ emissions per kW-hr and a high vehicle range requirement. The BEV was preferable for all other conditions.     

土压平衡矩形顶管施工引起的地表沉降规律研究

为了分析与掌握矩形顶管施工引起的地表沉降变形规律,提出基于MIDAS-GTS有限元软件的分析方法,首先,通过工程实例验证MIDAS-GTS有限元软件在分析顶管施工引起地表沉降变形的有效性;其次,通过影响因素的敏感性分析确定不同影响因素作用下的地表沉降变形特性,这些影响因素主要包括开挖面支护压力、侧摩阻力、地层结构特性等;最后,通过地表沉降变形特性分析得出矩形顶管的适用范围。研究结果表明:基于MIDAS-GTS有限元软件的地表沉降规律分析方法和结果,可为矩形顶管施工过程提供相关参考和借鉴。