Modelling Tracer Dispersion from Landfills

Several wind tunnel experiments of tracer dispersion from reduced-scale landfill models are presented in this paper. Different experimental set-ups, hot-wire anemometry, particle image velocimetry and tracer concentration measurements were used for the characterisation of flow and dispersion phenomena nearby the models. The main aim of these experiments is to build an extensive experimental data set useful for model validation purposes. To demonstrate the potentiality of the experimental data set, a validation exercise on several mathematical models was performed by means of a statistical technique. The experiments highlighted an increase in pollutant ground level concentrations immediately downwind from the landfill because of induced turbulence and mean flow deflection. This phenomenon turns out to be predominant for the dispersion process. Tests with a different set-up showed an important dependence of the dispersion phenomena from the landfill height and highlighted how complex orographic conditions downwind of the landfill do not affect significantly the dispersion behaviour. Validation exercises were useful for model calibration, improving code reliability, as well as evaluating performances. The Van Ulden model proved to give the most encouraging results.     

Extension of the EUROS Integrated Air Quality Model to Fine Particulate Matter by Coupling to CACM/MADRID 2

The European Operational Smog (EUROS) integrated air quality modelling system has been extended to model fine particulate matter (PM). From an extended literature study, the Caltech Atmospheric Chemistry Mechanism and the Model of Aerosol Dynamics, Reaction, Ionisation and Dissolution were selected and recently coupled to EUROS. Currently, modelling of mass and chemical composition of aerosols in two size fractions (PM_2.5 and PM_10–2.5) is possible. The chemical composition is expressed in terms of seven components: ammonium, nitrate, sulphate, elementary carbon, primary inorganic compounds, primary organic compounds and secondary organic compounds. Calculated PM₁₀ concentrations and chemical composition are presented for two summer months of the year 2003 (1 July to 31 August).     

Improving inverse model fitting in trees—Anisotropy,multiplicative effects,and Bayes estimation

Model fitting for individual-based effects in forests has some problems. Because samples measuring the separate influence of each individual are rarely available, the measured value in the sample represents the influence of all surrounding individual trees. Therefore, it is helpful to build inverse models that use the spatial pattern of the variable as well as that of the source trees. For example, since seed dispersal is influenced by wind effects, a model is discussed describing anisotropic effects to ensure an unbiased estimate of the total fruit number. Further, we present a model describing the absorption of radiation by trees. In this case a multiplicative combination of individual effects yields the total effect. Our approach uses logarithmic transformations of the original data to model multiplicative combinations as sum of transformed single effects. For fitting model parameters we propose an approach based on Bayesian statistics, to ensure ecologically interpretable parameters.     

QSAR trout toxicity models on aromatic pesticides

The pesticides originally designed to kill target organisms are dangerous for many other wild species. Since they are applied directly to the environment, they can easily reach the water basins and the topsoil. A dataset of 125 aromatic pesticides with well-expressed aquatic toxicity towards trout was subjected to quantitative structure activity relationships (QSAR) analysis aimed to establish the relationship between their molecular structure and biological activity. A literature data for LC₅₀ concentration killing 50% of fish was used. In addition to the standard 2D-QSAR analysis, a comparative molecular field analysis (CoMFA) analysis considering the electrostatic and steric properties of the molecules was also performed. The CoMFA analysis helped the recognition of the steric interactions as playing an important role for aquatic toxicity. In addition, the transport properties and the stability of the compounds studied were also identified as important for their biological activity.     

Value of information in product recovery decisions: a Bayesian approach

There is a widespread recognition of the need for better information sharing and provision to improve the viability of end-of-life (EOL) product recovery operations. The emergence of automated data capture and sharing technologies such as RFID, sensors and networked databases has enhanced the ability to make product information; available to recoverers, which will help them make better decisions regarding the choice of recovery option for EOL products. However, these technologies come with a cost attached to it, and hence the question ‘what is its value?’ is critical. This paper presents a probabilistic approach to model product recovery decisions and extends the concept of Bayes' factor for quantifying the impact of product information on the effectiveness of these decisions. Further, we provide a quantitative examination of the factors that influence the value of product information, this value depends on three factors: (i) penalties for Type I and Type II errors of judgement regarding product quality; (ii) prevalent uncertainty regarding product quality and (iii) the strength of the information to support/contradict the belief. Furthermore, we show that information is not valuable under all circumstances and derive conditions for achieving a positive value of information.     

Fault-dynamic modelling of a phthalic anhydride reactor

A new methodology, fault-dynamic modelling, has been developed for analysis of potentially hazardous situations in the process industries. Traditional fault-tree analysis is used to determine the combinations of component failure that can lead to a particular process upset condition. Realistic dynamic modelling is then used to calculate the time available for corrective action once the upset has started. The method is applied to a phthalic anhydride reactor. The results of the analysis identify three process upsets that can lead to catastrophic failure in 2–5 min if left uncorrected. Other process upsets lead to safe conditions.     

Accidental release: Fuzzy selection of adequate formal model

Risk assessment of a chemical process plant requires the application of a variety of consequence models in order to estimate the potential physical effects of accidental releases. The types of models required vary depending upon the substance under consideration and the circumstances of a release. The objective of this study was the development and application of a system based upon ‘fuzzy logic’, for the selection of a computer model to be used in consequence analysis in specific situations where only certain types of consequence models can be used. The collection of data for modelling purposes from different kinds of computer model and application of fuzzy methods were also important aims of the study.     

O&M SPENDING LEVELS IN THIRD WORLD IRRIGATION SYSTEMS: EXPLORING ECONOMIC ALTERNATIVES1

ABSTRACT: Third World irrigation and drainage systems have experienced major declines recently in both capability and performance. This is due initially to working them well beyond their design capaci-capacities; scouring, sedimentation, and overtopping result. Chronic O&M underfunding then adds heavily to this worsening malaise. International donors have assisted irrigation departments with rehabilitation projects and programs to improve O&M effectiveness on a grand (billions of dollars) scale. Despite their historical propensity to examine, almost fastidiously, program economic justifications (B/C, IRR, etc), the donors apparently have glossed over two basic analytic elements for (a) more spending on O&M as distinct from an equivalent spending on other means to provide farmers with an m³ of water; and (b) different levels of O&M spending on canals and drains. Surely those different levels provide differing benefits, in total, and at the margin. Which level is most economic? This paper identifies these latter analytical issues, posits methodologies key to an O&M spending level analysis, and discusses the information base. Particular attention is paid to identifying relevant costs and benefits, and to suggesting supplementary criteria for O&M spending level selection. The paper is an exercise in delineation of an imminently practical area of irrigation engineering economics.     

Integrated economic-ecological analysis and evaluation of management strategies on nutrient abatement in the Rhine basin

Management of river basins involves the making of informed choices about the desired levels of economic activities and ecosystem functioning in the catchment. Information on the economic and ecological effects of measures as well as their spatial distribution is therefore needed. This paper proposes the following instruments to support decision-making in river basins: (1) the linking of models and indicators to describe the economic and ecological effects of management actions and their spatial distribution and (2) an extended evaluation framework that aims to evaluate management actions on three objectives for sustainable river management. These are cost-effectiveness, spatial equity, and environmental quality. This paper illustrates the potential of these instruments for river basin management by a case-study on nutrient management in the Rhine basin. In this case-study four nutrient abatement strategies are formulated, based on policies of the International Commission for the Protection of the Rhine and the North Sea Commission. These strategies are analysed and evaluated on their contribution to the three management objectives. Results show that none of these strategies score highest on cost-effectiveness, spatial equity and environmental quality simultaneously. It appears that cost-effectiveness is in conflict with environmental quality, whereas spatial equity and cost-effectiveness show quite close correspondence. This means that a trade-off has to be made between costs and spatial equity on the one hand, and environmental standards on the other hand. This paper offers a framework to make these trade-offs more explicit and provides quantitative information on cause-effect relationships, economic and environmental effects and the spatial distribution of these effects for various management strategies. This information can be particularly useful in the development of compromises required to establish international agreement and co-operation.