Application of a coupled ecosystem-chemical equilibrium model, DayCent-Chem, to stream and soil chemistry in a Rocky Mountain watershed

Atmospheric deposition of sulfur and nitrogen species have the potential to acidify terrestrial and aquatic ecosystems, but nitrate and ammonium are also critical nutrients for plant and microbial productivity. Both the ecological response and the hydrochemical response to atmospheric deposition are of interest to regulatory and land management agencies. We developed a non-spatial biogeochemical model to simulate soil and surface water chemistry by linking the daily version of the CENTURY ecosystem model (DayCent) with a low temperature aqueous geochemical model, PHREEQC. The coupled model, DayCent-Chem, simulates the daily dynamics of plant production, soil organic matter, cation exchange, mineral weathering, elution, stream discharge, and solute concentrations in soil water and stream flow. By aerially weighting the contributions of separate bedrock/talus and tundra simulations, the model was able to replicate the measured seasonal and annual stream chemistry for most solutes for Andrews Creek in Loch Vale watershed, Rocky Mountain National Park. Simulated soil chemistry, net primary production, live biomass, and soil organic matter for forest and tundra matched well with measurements. This model is appropriate for accurately describing ecosystem and surface water chemical response to atmospheric deposition and climate change.     

伊春河河水水溶性腐殖酸内源释放模型

以水溶性腐殖酸含量很高的伊春河为例，利用冬季冰封无外源输入的条件，在有产室内模拟研究的基础上，通过现场采样及测定，建立了伊春河河水水溶性腐殖酸的内源释放模型，根据同期采集样品进行的验证表明，该模型能够准确地反映河流沉积物中水溶性瘁殖酸向河水中释放的速率以及速率与流速等条件的定量关系。     

Review of hydrogen safety during storage,transmission, and applications processes

Hydrogen is considered an excellent clean fuel with potential applications in several fields. There are serious safety concerns associated with the hydrogen process. These concerns need to be thoroughly understood and addressed to ensure its safe operation. To better understand the safety challenges of hydrogen use, application, and process, it is essential to undertake a detailed risk analysis. This can be achieved by performing detailed consequence modellings and assessing risk using the computational fluid dynamics (CFD) approach. This study comprehensively reviews and analyses safety challenges related to hydrogen, focusing on hydrogen storage, transmission, and application processes. Range of release and dispersion scenarios are investigated to analyse associated hazards. Approaches to quantitative risk assessment are also briefly discussed.     

Green energy generation through PEHF – a blueprint of alternate energy harvesting

In this work, an attempt has been made to harvest green energy from piezoelectric material using fluid flow in a conduit. Piezoelectric Energy Harvesting using Fluid Flow (PEHF) experimental model has been designed and the outputs obtained are compared with results obtained from simulations using ANSYS (computational fluid dynamics) and also with the mathematical modeling. The PEHF model has been utilized to analyze the effect of flow rate of water with reference to energy extracted. The full wave bridge rectifier and voltage doubler circuits have been used to obtain the direct current (DC) from the PEHF model. It is observed that the output obtained using experiments holds good in agreement with the results retrieved through simulations and mathematical results. The increase in flow rate of fluid leads to initially increase and then decrease in output of PEHF model as the maximum energy generated when flow rates (external force) matches with the frequency of excitation of the systems, i.e., at its resonance. The maximum energy output is generated at its resonance frequencies. It is observed that the full wave bridge rectifier circuit gives greater output as compared to a voltage doubler circuit.     

我国大气环境影响评价的进展

随着我国大气环境保护的重点从点源烟尘治理向区域环境污染综合防治发展,近20多年来,大气环境影响评价在评价范围、内容要求、工作程序、实验方法、输送扩散模型以及与总量控制、区域规划、风险评价等的关系方面都有长足的进步.在已完成的2000多项大气环境影响评价成果的基础上,本文作了全面的回顾,总结了各阶段的特点及开展的主要工作,提出了6项今后应着重解决的问题和近期内可能取得的进展.     

Testing the importance of accurate meteorological input fields and parameterizations in atmospheric transport modelling using dream - validation against ETEX-1

A tracer model, the DREAM, which is based on a combination of a near-range Lagrangian model and a long-range Eulerian model, has been developed. The meteorological meso-scale model, MM5V1, is implemented as a meteorological driver for the tracer model. The model system is used for studying transport and dispersion of air pollutants caused by a single but strong source as, e.g. an accidental release from a nuclear power plant. The model system including the coupling of the Lagrangian model with the Eulerian model are described. Various simple and comprehensive parameterizations of the mixing height, the vertical dispersion, and different meterological input data have been implemented in the combined tracer model, and the model results have been validated against measurements from the ETEX-1 release. Several different statistical parameters have been used to estimate the differences between the parameterizations and meterological input data in order to find the best performing solution.     

Integrated coastal management: the challenge of transdisciplinarity

The Euroconference on Coastal Management Research held in San-Feliu de Guixols, Spain, in December 1997 brought together scientists from a great variety of disciplines in the natural and social sciences, in a search for modes of transdisciplinary cooperation in the context of integrated coastal management. During the conference the participants discussed which interactions among disciplines are required for different coastal issues. Discussion groups each focused on a particular type of coastal environment, characterized by a particular type and degree of development. The group discussions were inspired by background papers which were prepared for this purpose by invited speakers. A selection of these background papers were redrafted on the basis of the conference outcome, and are published in this issue of theJournal of Coastal Conservation. The reports of the discussion groups are published in a conference proceedings booklet issued by EMAPS (1998), the European Polar and Marine Sciences Secretariat. A synthesis of ideas on the challenge of transdisciplinarity, expressed during the discussion group sessions, is presented in this introduction. The statements reflect opinions or suggestions which received broad support from the participants; they should not be taken as proven knowledge.     

Methodological aspects of life cycle assessment of integrated solid waste management systems

Environmental life cycle assessment (LCA) developed rapidly during the 1990s and has reached a certain level of harmonisation and standardisation. LCA has mainly been developed for analysing material products, but can also be applied to services, e.g. treatment of a particular amount of solid waste. This paper discusses some methodological issues which come into focus when LCAs are applied to solid waste management systems. The following five issues are discussed. (1) Upstream and downstream system boundaries: where is the ‘cradle’ and where is the ‘grave’ in the analysed system? (2) Open-loop recycling allocation: besides taking care of a certain amount of solid waste, many treatment processes also provide additional functions, e.g. energy or materials which are recycled into other products. Two important questions which arise are if an allocation between the different functions should be made (and if so how), or if system boundaries should be expanded to include several functions. (3) Multi-input allocation: in waste treatment processes, different materials and products are usually mixed. In many applications there is a need to allocate environmental interventions from the treatment processes to the different input materials. The question is how this should be done. (4) Time: emissions from landfills will continue for a long time. An important issue to resolve is the length of time emissions from the landfill should be considered. (5) Life cycle impact assessment: are there any aspects of solid waste systems (e.g. the time horizon) that may require specific attention for the impact assessment element of an LCA? Although the discussion centres around LCA it is expected that many of these issues are also relevant for other types of systems analyses.     

Evaluating the ability of habitat suitability models to predict species presences

Models predicting species spatial distribution are increasingly applied to wildlife management issues, emphasising the need for reliable methods to evaluate the accuracy of their predictions. As many available datasets (e.g. museums, herbariums, atlas) do not provide reliable information about species absences, several presence-only based analyses have been developed. However, methods to evaluate the accuracy of their predictions are few and have never been validated. The aim of this paper is to compare existing and new presence-only evaluators to usual presence/absence measures.     

Phast validation of discharge and atmospheric dispersion for pressurised carbon dioxide releases

The consequence modelling package Phast examines the progress of a potential incident from the initial release to the far-field dispersion including the modelling of rainout and subsequent vaporisation. The original Phast discharge and dispersion models allow the released substance to occur only in the vapour and liquid phases. The latest versions of Phast include extended models which also allow for the occurrence of fluid to solid transition for carbon dioxide (CO₂) releases.As part of two projects funded by BP and Shell (made publicly available via CO2PIPETRANS JIP), experimental work on CO₂ releases was carried out at the Spadeadam site (UK) by GL Noble Denton. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases (vapour storage). The CO₂ was stored in a vessel with attached pipework. At the end of the pipework a nozzle was attached, where the nozzle diameter was varied.This paper discusses the validation of Phast against the above experiments. The flow rate was predicted accurately by the Phast discharge models (within 10%; considered within the accuracy at which the BP experimental data were measured), and the concentrations were found to be predicted accurately (well within a factor of two) by the Phast dispersion model (UDM). This validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.