油库消防自动控制系统的设计

提出了一套合理可靠的油库消防自动控制系统的设计方案，介绍了设计过程及应注意的问题。     

Modeling groundwater flow and its associated environmental problem in a lowland coastal plain: a first step towards a sustainable development plan

Groundwater is an important resource in the alluvial coastal lowland plains. In the Shiroishi lowland plain, southwestern Kyushu Island of Japan, land subsidence due to groundwater development has long been recognized as an environmental issue. Land subsidence can have several negative economic and social implications. In this study, an integrated numerical groundwater and land subsidence model, which combines a three-dimensional numerical groundwater flow model and a one-dimensional soil consolidation model, was used to simulate the dynamic groundwater flow and ground subsidence due to pumping. On the other hand, a groundwater optimization model was also formulated to search for an optimal safe yield of groundwater pumping without violating physical, environmental, social-economic constraints. The model results reveal that groundwater levels in the aquifers greatly vary from season to season in response to varying climatic and pumping conditions. Consequently, land subsidence has rapidly occurred throughout the area with the central prone in Shiroishi plain. The study also proposes a countermeasure against subsiding process in the area by means of numerical models. The optimization model result suggests that pumping can be increased in the northern part of the study area without leading to significant land subsidence.     

无烟煤循环流化床锅炉的节能设计及应用

结合Ⅱ类无烟煤的特点,分析探讨了针对低挥发分循环流化床20t/h无烟煤锅炉的节能设计,其中采用较高炉膛及较低空截面气速,在密相区布置合适数量的埋管受热面等环保技术措施。     

升—降温全过程中约束钢梁的有限元与试验分析

以轴向支撑连接方式,利用自制的加热炉对约束钢梁进行了升—降温全过程的试验研究。重点研究了钢梁的跨中挠度随温度变化的规律,以及梁端不同轴向支撑刚度和钢柱不同轴压比条件下约束钢梁的屈曲模式及其梁端轴向支撑的破坏形态。基于ANSYS有限元软件,采用温度场和结构耦合中的间接法,对升-降温全过程中的约束钢梁进行了有限元分析。数值计算结果与试验结果吻合较好,验证了有限元模型和参数设置的合理性。根据对比分析,讨论了我国现行钢结构防火技术规范中存在的关键问题,特别提出了钢结构抗火设计应有的内涵,为钢结构抗火研究提供了新的思路。     

The ethics in balancing control and freedom when engineering solutions for sustainable behaviour

Research suggests that to allow for sustainable development, consumption patterns must be changed. Individual behaviour is central to society's impact on the environment. However, due to the complexity of environmental issues, much of the political debate and technology development is inaccessible to consumers and based on the values, interpretations and priorities of experts. User‐centred, user‐involved and participatory processes are fundamental in design disciplines such as interaction design and participatory design. Research into the possibilities for cross‐pollination of design for sustainability and user‐centred design has distinguished several strategies for design‐led behavioural change. The strategies differ with regard to the levels of control and responsibility that users are left with, ranging from empowerment through information about consequences of behaviour to blocking behaviour or forcing sustainable practices upon individuals. By considering technological behaviour‐steering strategies in the light of science and technology studies and theory on technological mediation, the paper addresses the ethical issues that arise and discusses how designers can contribute to more sustainable consumption patterns without compromising quality of life, individual freedom and democratic rights.     

A meta‐heuristic approach for supporting adaptive disassembly sequencing using a multi‐objective concept

One of the key features of environmentally conscious manufacturing has been the efforts to promote product recycling and remanufacturing. Efficient material re‐utilisation through product disassembly to retrieve the desired parts and/or subassemblies is one rational approach. This is because it can promote the conservation of both material and energy resources whilst concurrently reducing environmental impact. However, because manufactured products may be made from many components, disassembly load becomes a critical factor that may obstruct the recovery of materials. Accordingly, it is essential to develop a practical method for deriving a disassembly plan to decrease such load, and to endow a certain value to the product at the end of its life cycle. With this understanding, the authors have developed a practical procedure to produce an adaptive disassembly strategy. The authors have applied a meta‐heuristic method known as genetic programming (GP) as a search engine to derive the adaptive disassembly sequence together with a multi‐objective optimisation method termed MOON^2R. The authors have also proposed a hierarchical sequencing method to cope with large/complex products and added several ideas to increase the applicability associated with the interests in disassembly of hazardous and/or valuable parts, and alternative disassembly actions. Through numerical experiments, the authors examined the effectiveness of the proposed approach by showing its support for relevant planning and design decisions for product recycling and remanufacturing from various viewpoints.     

Application of TISM and MICMAC for analysis of influential factors of sustainable development of tablet devices: a case study

Abstract

With the advancements in technology and increase in demand for eco-efficient products, manufacturers are focusing on sustainable development of products. Enticing a huge demand over the recent years, sustainable development of Information and Communication Technology (ICT) products are a subject of interest for most practitioners and academicians. A number of factors are found to influence the sustainable development of ICT products. It is necessary to identify the most important factors and determine the dependencies of factors among themselves. In this regard, a case study has been conducted in the context of sustainable development of tablet devices. The most influential factors have been identified from literature and with experts input. The factor dependencies are established using Total Interpretive Structural Modelling (TISM) methodology. MICMAC analysis is used to classify the factors based on their ability to influence other factors. The output of TISM forms the input for MICMAC analysis. From the study, it was found that the factors, ‘Customer pressure’, ‘Government regulations’, ‘Competitiveness’, ‘Organization initiative’ and ‘Technological advancements’ are the most driving factors. Factors ‘Environmental impact’, ‘Energy efficiency’ and ‘Opportunities to upgrade’ were found to be dependent.     

Mapping out the design opportunities: pathways of sustainable behaviour

To advance the area of design for sustainable behaviour (DfSB), a common behaviour terminology is needed to enable comparisons of studies across application areas. Thus, the map of pathways of sustainable behaviour was created with the aim of charting different paths that users can follow to reduce environmental impact when interacting with artefacts. The construction of the map results from a comparative analysis of sustainable behaviours identified in previous studies in conjunction with a review of existing behaviour classifications. The proposed map of pathways gives a comprehensive overview of all artefact-related resource-consuming usage behaviours, organised according to a design perspective and divided with regard to aspects of use and obtainment, primary and secondary artefact, duration and type of effort. Through design, the user can be encouraged to take any of the five identified paths: choice of artefact, changed use, maintenance and repair, mediated use and regulated artefact. Using the map in a DfSB process can guide the exploration phase and highlight potential design opportunities when choosing target behaviour. If adopted by the DfSB community, the united typology of the map also provides means necessary to make rigorous comparisons and develop the field and its tools.     

Macroergonomic Analysis and Design for Improved Safety and Quality Performance

Abstract

Macroergonomics, which emerged historically after sociotechnical systems theory, quality management, and ergonomics, is presented as the basis for a needed integrative methodology. A macroergonomics methodology was presented in some detail to demonstrate how aspects of microergonomics, total quality management (TQM), and sociotechnical systems (STS) can be triangulated in a common approach, in the context of this methodology, quality and safety were presented as 2 of several important performance criteria. To demonstrate aspects of the methodology, 2 case studies were summarized with safety and quality performance results where available. The first case manipulated both personnel and technical factors to achieve a “safety culture” at a nuclear site. The concept of safety culture is defined in INSAG-4 (International Atomic Energy Agency, 1991). as “that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance.” The second case described a tire manufacturing intervention to improve quality (as defined by Sink and Tuttle, 1989) through joint consideration of technical and social factors. It was suggested that macroergonomics can yield greater performance than can be achieved through ergonomic intervention alone. Whereas case studies help to make the case, more rigorous formative and summative research is needed to refine and validate the proposed methodology respectively.