酸性高氟废水处理试验研究

对某化工厂高氟酸性废水经过试验后，采用二级石灰－氯化钙沉淀絮凝法处理，出水的氟浓度达到了国家规定的一级排放标准，且系统运行稳定，工艺简便，易于施工和运行管理。     

Determination of polychlorinated biphenyl congeners in environmental samples

Ｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｐｏｌｙｃｈｌｏｒｉｎａｔｅｄｂｉｐｈｅｎｙｌｃｏｎｇｅｎｅｒｓｉｎｅｎｖｉｒｏｎｍｅｎｔａｌｓａｍｐｌｅｓ￥ＣｈｕＳｈａｏｇａｎｇ；ＹａｎｇＣｈｕｎ；ＸｕＸｉａｏｂａｉ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－Ｅｎｖ...     

气相色谱法测定二硫化碳和甲硫醚

利用气相色谱(配火焰光度检测器,采用3mxφ2mm玻璃填充柱分离)对CS2和甲硫醚(DMS)两种含硫化合物进行了分离检测。该方法具有较高的灵敏度和良好的线性关系。结果表明:该分析对含硫气体的最小检测浓度在mg/m3级,在柱温为70℃,检测器温度为180℃,气化室温度为150℃,氮气流速为50mL/min时,CS2的回收率为98.66%,变异系数为2.12%;甲硫醚的回收率为98.66%,变异系数为1.56%。     

脉冲电晕等离子体脱硫脱氮与除尘技术

脉冲电晕放电是产生等离子体的方法之一，目前已达到工业性试验阶段，该文对脉冲电晕等离子脱硫脱氮与除尘技术的形成过程进行了回顾，对其理论作了分析，并简介了工艺流程，还指出了目前存在的主要问题和需研究的关键技术。     

医疗废物焚烧残余物固化技术初探

根据对医疗废物焚烧残余物中有毒有害物质的化验分析结果,确定焚烧残余物中有毒有害成分含量仍较高,部分指标超出标准值,必须对其进行稳定化/固化处理,避免对土壤及地下水环境造成污染.本文阐述了稳定化/固化处理原理及处理工艺,使医疗废物无害化、减量化和资源化的处理原则得以全面实现.     

胶粉的生产利用现状及前景分析

废橡胶作为工业垃圾 ,已为世界所公认 ,介绍了废橡胶回收利用的意义和方法 ,着重阐述了胶粉的生产利用现状 ,并简要分析了胶粉的生产利用前景     

Developing Canada's National Forest Carbon Monitoring, Accounting and Reporting System to Meet the Reporting Requirements of the Kyoto Protocol

The rate of carbon accumulation in the atmosphere can be reduced by decreasing emissions from the burning of fossil fuels and by increasing the net uptake (or reducing the net loss) of carbon in terrestrial (and aquatic) ecosystems. The Kyoto Protocol addresses both the release and uptake of carbon. Canada is developing a National Forest Carbon Monitoring, Accounting and Reporting System in support of its international obligations to report greenhouse gas sources and sinks. This system employs forest-inventory data, growth and yield information, and statistics on natural disturbances, management actions and land-use change to estimate forest carbon stocks, changes in carbon stocks, and emissions of non-CO₂ greenhouse gases. A key component of the system is the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS). The model is undergoing extensive revisions to enable analyses at four spatial scales (national, provincial, forest management unit and stand) and in annual time steps. The model and the supporting databases can be used to assess carbon-stock changes between 1990 and the present, and to predict future carbon-stock changes based on scenarios of future disturbance rates and management actions.     

浅谈原子吸收分光光度计在环境监测中的应用

本文介绍了原子吸收分光光度计在环境监测中的应用情况和重要性。分析了原子吸收光度法（包括石墨炉法）与ICP-AES（电感偶合等离子体发射光谱法），原子荧光法，极谱法在分析元素时各自的优缺点，又从目前环境监测的角度阐述了应用原子吸收分光度计的重要性与现实性。分析了原子吸收分光广度计在使用中的常见问题及原子吸收分光广度法分析中常出现的问题（从仪器、方法角度分别讲述）。并提出了原子吸收分光度计要进一步应适应环境监测的需求。     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

Simulating dairy liquid waste management options as a nitrogen source for crops

Large scale dairy operations are common. In many cases the manure is deposited on a paved surface and then removed with a flushing system, after which the solids are separated, the liquid stored in ponds, and eventually the liquid applied on adjacent crop land. Management of liquid manure to maximize the fertilizer value and minimize water quality degradation requires knowledge of the interactive effects of mineralization of organic N (ON) to NH₄⁺, crop uptake of mineral N, and leaching of NO₃⁻ on a temporal basis. The purpose of the research was to use the ENVIRO-GRO model to simulate how the amount of applied N, timing of N application, ON mineralization rates, chemical form of N applied, and irrigation uniformity affected (1) yields of corn (Zea mays) in summer and a forage grass in winter in a Mediterranean climate and (2) the amount of NO₃⁻ leached below the root zone. This management practice is typical for dairies in the San Joaquin Valley of California. The simulations were conducted for a 10-year period. Steady state conditions, whereby an equivalent amount of N applied in the organic form will be mineralized in a given year, are achieved more rapidly for materials with high mineralization rates. Both timing and total quantity of N application are important in affecting crop yield and potential N leaching. Major conclusions from the simulations are as follows. Frequent low applications are preferred to less frequent higher applications. Increasing the amount of N application increased both the crop yield and the amount of NO₃⁻ leached. Increasing irrigation uniformity increased crop yields but had variable effects on the amount of NO₃⁻ leached. A winter forage crop following a summer corn crop effectively reduced the leaching of residual soil N following the corn crop.