上海市大气PM2.5中溶剂可抽提有机物的特征研究

利用溶剂抽提、分离、毛细管气相色谱-质谱联用技术对2000年10月至2001年8月上海市5个不同功能区采集的大气PM_(2.5)样品中的溶剂可抽提有机物进行了检测,共检测出正构烷烃、单环芳烃、多环芳烃、有机酸、有机醇、有机酯等各类溶剂可抽提有机化合物267种。检出的82种多环芳烃中有15种属于美国EPA优先控制污染物名单。比较了不同季节、不同区域PM_(2.5)样品中正构烷烃、多环芳烃等化合物分布特征的差异。检出的喹啉类含氮杂环类化合物以及有机酸等污染物表现出一定的机动车排放特征。     

4—氯苯甲酸钠的光催化氧化降解及其影响因素

本试验采用P－25TiO2，光催化剂，对4－氯苯甲酸钠的光催化氧化降解及污染物初始浓度，催化剂投加量和入射光强等因素的影响进行了研究，研究发现污染物初始降解速率与其初始浓度的关系遵循Langmuir-Hinshelwood模式，其中半饱和浓度常数Ks不仅是催化剂和污染物种类的函数，而且也是入射光强的函数，催化剂投加量存在一限值，当低于此限值时，污染物降解速率由于催化剂浓度的不足受到影响而下降，当高于此限值时，污染物降解速率受催化剂投加量的影响变小，在本试验4－CBA－Na浓度为0.15-0.6mmol／L时该催化剂限值浓度大约为0.4g/L，在入射光强为1-7mW/cm^2和催化剂浓度为0.4g／L下，污染物降解速率与光强成0.67次幂关系，经估算其量子效率为6．3％。     

三明市区环境空气中可吸入颗粒物的现状分析

应用近两年三明市区环境空气自动监测系统所监测的环境空气中的可吸入颗粒物的大量监测数据,分析总结三明市区可吸入颗粒物的污染现状、规律性,以及可吸颗粒物的主要来源及防治对策。     

抚顺市空气可吸入颗粒物特征的研究

于2002年1～7月份在抚顺市区四个点位采集了环境空气中的可吸入颗粒物样品，经分析后获得了可吸入颗粒物组分的时间分布和空间分布特征，即采暖期PM10样品中有机碳（OC）、元素碳（EC）的绝对含量和相对含量均高于非采暖期，工业区PM10样品中的Fe、Zn、Pb的绝对含量和相对含量均明显高于其它点位，反映了其工业区的特点。     

一个研究街道峡谷流场及浓度场特征的三维数值模式

目前，研究街道峡谷内流场及机动车排放污染物的扩散行为特征所采用的主要方法为：采用野外测试法和物理模拟法，而采用三维数值模拟方法研究此问题的工作很少。本文创建了一个研究微尺度街道峡谷内流场及机动车排放污染物扩散特征的三维数值模式，即首次采用伪不定常方法，利用K——E闭合方案，建立了一个模拟城市街道峡谷内流场及污染物扩散特征与街道峡谷风场、街道几何结构及两侧建筑物高度对称性之间的复杂关系的三维数值模式。经过与实际监测资料及风洞实验对比，结果表明此三维模式具有较好的模拟精度，能够很好模拟峡谷内的风场及街谷几何结构对街道峡谷内流场及浓度场特征的影响，有很强的实用性。     

BUILDUP,WASHOFF, AND EVENT MEAN CONCENTRATIONS1

ABSTRACT: Most watershed water quality simulation models require the user to specify pollutant buildup and washoff rate parameters for pollutants, by land use. Buildup and washoff rates are difficult to measure directly, and only limited guidance and few observed data are available from the literature. Many studies, however, report storm event mean concentrations (EMCs). These EMCs must arise as a result of the buildup and washoff processes, but typically represent the net contribution from a variety of pervious and impervious surfaces. This paper explores the relationship between EMCs and buildup/washoff parameters. An assumption of the mathematical form of the buildup/washoff relationship gives an algebraic expression for the EMC consistent with model assumptions. This yields techniques to separate observed EMCs into contributions from different land uses and from pervious and impervious surfaces. Given this relationship, numerical optimization may be used to estimate site specific values of buildup and washoff parameters from observed storm EMCs for use in modeling. Use of this approach helps ensure that model parameters are consistent with observed data, providing a rational starting point for final model calibration. Several site examples demonstrate use of the method.     

Effect of soil solids concentration in batch tests on the partition coefficients of organic pollutants in landfill liner-soil materials

 The effect of the soil solids concentration in batch tests on the measured values of the partition coefficient (K _p) of organic pollutants in landfill liner-soil material was investigated. Since this study was based on the results of batch and column tests conducted independently, there were limitations to the conclusions derived. The organic compounds tested were benzene, methylene chloride, toluene, trichloroethylene, and p-xylene. The results of this study showed that as soil solids concentrations increased, the measured K _p values of these organic compounds strongly decreased. The observed values of K _p stabilized when the soil solids concentration was above a certain value. Typical K _p values obtained from batch tests conducted under high soil solids concentrations were close to those obtained from column tests. It was concluded that the K _p values of organic compounds measured under low soil solids concentrations, i.e., less than 100 g/l, may not correctly simulate the field situation. Consequently, the values of K _p obtained with low soil solids concentrations can result in an overestimation of the retardation factor of the landfill liner material. Received: March 14, 2002 / Accepted: August 25, 2002     

80m烟囟排放放射性气溶胶连续自动监测

本文介绍采用德国进口的ＬＢ９１００Ｄ监测系统对８０ｍ烟囟排放的α放射性气溶胶浓度进行连续、自动监测。并与国产ＦＪ－３６７，ＦＨ－４６３Ａ装置进行了对比则量，两套装置的测量结果符合得较好。     

仪化热电厂提高循环水浓缩倍率的措施

针对仪化热电厂将循环水用作冲灰水，导致浓缩倍率只有1.6，以及凝汽器铜管腐蚀结垢严重等问题，提出了隔断循环水与冲灰水的直接联系，实现闲路循环，对凝汽器铜管进行酸洗，并对循环水实施加缓蚀阻垢荆、杀菌剂和旁流过滤等办法，全部实施后产生了很好的效益，值得借鉴。     

大气污染物最大落地浓度计算方法的比较

大气环境影响评价工作中，采用有风点源扩散模式定量预测大气污染物的最大落地浓度，通常有轴线法、常数法和非常数法这三种计算方法。本文通过实例对上述三种计算方法进行比较分析，明确了各自的适用范围，其中以轴线法的应用最为全面。