升流式厌氧污泥床--压力式好氧接触氧化工艺处理制药废水的实践

采用升流式厌氧污泥床—压力式好氧接触氧化工艺处理锦州九洋药业有限责任公司制药废水,该工艺技术成熟、处理效率高,运行稳定可靠。结果表明处理后的出水水质可以满足排放标准的要求。     

扑救森林火灾应遵守的安全规则

本文简要介绍了在林火扑救中扑火队员应遵守的安全规则。     

宁夏煤田火灾的危害及综合治理研究

针对宁夏回族自治区煤田火灾的状况,指出了宁夏煤田火灾所造成的环境、地质及社会灾害,并根据宁夏煤田火灾的情况,进行了系统的分析,对灭火方法进行了研究和探讨。     

Essential hazard and process safety assessment of para-toluene sulfonic acid through calorimetry and advanced thermokinetics

Para-toluene sulfonic acid is a typical intermediary for the synthesis of pharmaceuticals, pesticides, and dyes and is a catalyst for organic synthesis. The consumption of para-toluene sulfonic acid used in organic synthesis has increased substantially. The toluene sulfonation process is the central path for synthesizing para-toluene sulfonic acid in China. However, the process has risks and has resulted in numerous disasters. This study utilized a reaction calorimeter 1 to reproduce the commercial toluene sulfonation process in a laboratory. The para-toluene sulfonic acid product was examined with an accelerating rate calorimeter and through differential scanning calorimetry. Both differential and integral isoconversional methods were used to determine the thermal stability of and appropriate thermokinetic models for para-toluene sulfonic acid. The safety parameters of para-toluene sulfonic acid were estimated. The research findings can be used for optimization of the toluene sulfonation process and for safe handling of para-toluene sulfonic acid.     

Influence of thermal environment on metallographic structure characteristics of the electric arc bead pattern

Electrical apparatuses are prone to arc, which generally causes a fire, even an explosion hazard, when a flammable gas mixture is present, especially during industrial processes. Terrible fire scenes are challenging for fire investigations. In this work, by performing a simultaneous thermal analysis test we simulated a fire environment and found that as the oxygen concentration decreased, the oxidation/exothermic peak temperature of ‘cause’ bead became higher, but the melting temperature was unaffected. Results indicated that the bead pattern underwent oxidation at approximately 831 °C, melting initiated at approximately 1060 °C, and the pattern then disappeared. The melted pattern grain changes were divided into three critical temperature stages: Approximately 600 °C, the onset temperature at which the melted pattern grains began to be equiaxed; approximately 831 °C, at which the grains were interspersed with oxygen-containing material; and 831–1060 °C, when the grains disappeared, which is a criterion for identifying electrical fires. However, the boundaries remained throughout the thermal environment process. Moreover, the bead pattern demonstrated three metallographic regions: Deep layer (Region I), the intermediate layer (Region Ⅱ), and surface layer (Region Ⅲ). Region I was the most thermally sensitive, in which equiaxed crystals first appeared. Region Ⅲ was the thermal reaction lag zone, in which the typical branching crystals finally disappeared, and Region Ⅱ was intermediate between Regions I and Ⅲ. The results may help fire investigators determine the fire scene temperature stages and provide support for fire evidence extraction.     

Response of Savanna Fire Regimes to Changing Fire-Management Policies in a Large African National Park

Abstract:  Approaches to fire management in the savanna ecosystems of the 2-million ha Kruger National Park, South Africa, have changed several times over the past six decades. These approaches have included regular and flexible prescribed burning on fixed areas and a policy that sought to establish a lightning-dominated fire regime. We sought to establish whether changes in management induced the desired variability in fire regimes over a large area. We used a spatial database of information on all fires in the park between 1957 and 2002 to determine elements of the fire regime associated with each management policy. The area that burned in any given year was independent of the management approach and was strongly related to rainfall (and therefore grass fuels) in the preceding 2 years. On the other hand, management did affect the spatial heterogeneity of fires and their seasonal distribution. Heterogeneity was higher at all scales during the era of prescribed burning, compared with the lightning-fire interval. The lightning-fire interval also resulted in a greater proportion (72% vs. 38%) of the area burning in the dry season. Mean fire-return intervals varied between 5.6 and 7.3 years, and variability in fire-return intervals was strongly influenced by the sequencing of annual rainfall rather than by management. The attempt at creating a lightning-dominated fire regime failed because most fires were ignited by humans, and the policy has been replaced by a more pragmatic approach that combines flexible prescribed burning with lightning-ignited fires.     

Degradation of kanamycin from production wastewater with high-concentration organic matrices by hydrothermal treatment

It is known that many kinds of fermentative antibiotics can be removed by temperature-enhanced hydrolysis from production wastewater based on their easy-to-hydrolyze characteristics. However, a few aminoglycosides are hard to hydrolyze below 100°C because of their stability expressed by high molecular energy gap (ΔE). Herein, removal of hard-to-hydrolyze kanamycin residue from production wastewater by hydrothermal treatment at subcritical temperatures was investigated. The results showed the reaction temperature had a significant impact on kanamycin degradation. The degradation half-life (t_1/2) was shortened by 87.17-fold when the hydrothermal treatment temperature was increased from 100°C to 180°C. The t_1/2 of kanamycin in the N₂ process was extended by 1.08-1.34-fold compared to that of the corresponding air process at reaction temperatures of 140-180°C, indicating that the reactions during hydrothermal treatment process mainly include oxidation and hydrolysis. However, the contribution of hydrolysis was calculated as 75%-98%, which showed hydrolysis played a major role during the process, providing possibilities for the removal of kanamycin from production wastewaters with high-concentration organic matrices. Five transformation products with lower antibacterial activity than kanamycin were identified using UPLC-QTOF-MS analysis. More importantly, hydrothermal treatment could remove 97.9% of antibacterial activity (kanamycin EQ, 1,109 mg/L) from actual production wastewater with COD_Cr around 100,000 mg/L. Furthermore, the methane production yield in anaerobic inhibition tests could be increased about 2.3 times by adopting the hydrothermal pretreatment. Therefore, it is concluded that hydrothermal treatment as a pretreatment technology is an efficient method for removing high-concentration hard-to-hydrolyze antibiotic residues from wastewater with high-concentration organic matrices.     

火焰撞击受限顶棚条件下顶棚最高温度数值模拟研究

顶棚下方最高温度是隧道火灾发展蔓延时的重要参数。针对火焰撞击顶棚并受到顶棚侧墙限制的强羽流驱动的顶棚射流,利用FDS模拟了18种缩尺寸隧道火灾工况,研究了顶棚下方最高温度随着火源功率、火源与顶棚距离的变化规律。结果表明:火焰撞击区域附近顶棚下方温度随着火源功率的增大而降低,随火源与顶棚距离的增大而升高;相反,在远离火源区域顶棚下方的温度随火源功率增大而升高,随火源与顶棚距离增大而降低;同时,通过分析隧道中心面上顶棚下方温度分布规律,提出了火焰撞击受限顶棚时顶棚下方最高温升的预测模型,研究结果能为实际的隧道消防提供一些参考。     

Efficient photocatalysis of tetracycline hydrochloride (TC-HCl) from pharmaceutical wastewater using AgCl/ZnO/g-C3N4 composite under visible light: Process and mechanisms

AgCl/ZnO/g-C₃N₄, a visible light activated ternary composite catalyst, was prepared by combining calcination, hydrothermal reaction and in-situ deposition processes to treat/photocatalyse tetracycline hydrochloride (TC-HCl) from pharmaceutical wastewater under visible light. The morphological, structural, electrical, and optical features of the novel photocatalyst were characterized using scanning electron microscopy (SEM), UV-visible light absorption spectrum (UV–Vis DRS), X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and transient photocurrent techniques. All analyses confirmed that the formation of heterojunctions between AgCl/ZnO and g-C₃N₄ significantly increase electron-hole transfer and separation compared to pure ZnO and g-C₃N₄. Thus, AgCl/ZnO/g-C₃N₄ could exhibit superior photocatalytic activity during TC-HCl assays (over 90% removal) under visible light irradiation. The composite could maintain its photocatalytic stability even after four consecutive reaction cycles. Hydrogen peroxide (H₂O₂) and superoxide radical (^·O₂) contributed more than holes (h⁺) and hydroxyl radicals (^·OH) to the degradation process as showed by trapping experiments. Liquid chromatograph-mass spectrometer (LC-MS) was used for the representation of the TC-HCl potential degradation pathway. The applicability and the treatment potential of AgCl/ZnO/g-C₃N₄ against actual pharmaceutical wastewater showed that the composite can achieve removal efficiencies of 81.7%, 71.4% and 69.0% for TC-HCl, chemical oxygen demand (COD) and total organic carbon (TOC) respectively. AgCl/ZnO/g-C₃N₄ can be a prospective key photocatalyst in the field of degradation of persistent, hardly-degradable pollutants, from industrial wastewater and not only.