超临界水氧化技术处理有机废水的研究

超临界水是处理难氧化有机污染物的一种很好媒介,因为在超临界状态下有机污染物和氧化剂能够互溶而加快反应速度,具有去除率高,反应时间短且无污染等特点,因而受到了越来越多的关注。本文主要概述了超临界水氧化的特点、机理、工艺流程和存在的问题,介绍了当前超临界水氧化处理难降解污染物的效果、动力学、催化剂研究等情况,并展望了其应用前景。     

冶金污泥稳定化/固化处理工艺研究

冶金工业在生产过程中产生大量酸性废水.对这类废水目前通常采用石灰中和沉淀处理.文章中通过研究采用水泥和工业废渣作固化基材固化处理冶金工业酸性废水用石灰混凝所产生的含铜、砷的污泥,分析了影响固化块抗压强度的多种因素,采用固体废物浸出毒性浸出方法对浸出率进行实验探讨.     

电凝聚处理轧制乳化废水的研究

用电凝聚法处理轧制乳化废水,探讨了影响破乳的各种因素,确定了最佳处理条件。研究结果表明:该法处理轧制乳化废水的效果很好,浊度去除率可达99.6%,COD去除率达99.5%。此外,还发现电凝聚法的处理效果优于药剂絮凝法。     

壳聚糖/PVA微粒上Cu2+的吸附平衡与动力学

采用粒径＜200μm、在酸碱介质中溶胀率小且能稳定存在的壳聚糖/PVA微粒对Cu2+的吸附进行了研究,结果表明,在pH 6,室温条件下,其饱合吸附量达56.0mg/g,随温度升高,吸附量降低.通过计算不同温度下各热力学参数△G0、△H0和△S0,证实该吸附为自发的放热过程.对实验数据运用相关数学模型拟合,显示等温吸附平衡符合Langmuir模型,吸附过程动力学更适合二级反应,被吸附在壳聚糖/PVA微粒上的Cu2+,可被0.01mo/L的EDTS或HNO3溶液快速地脱附出来,其洗脱率分别为85.3%和65.9%.     

Effects of acid,acid-ZVI/PMS,Fe(Ⅱ)/PMS and ZVI/PMS conditioning on the wastewater activated sludge(WAS)dewaterability and extracellular polymeric substances(EPS)

The effects of four conditioning approaches:Acid,Acid-zero-valent iron(ZVI)/peroxydisulfate(PMS),Fe(Ⅱ)/PMS and ZVI/PMS,on wastewater activated sludge(WAS) dewatering and organics distribution in supernatant and extracellular polymeric substances(EPS) layers were investigated.The highest reduction in bound water and the most WAS destruction was achieved by Acid-ZVI/PMS,and the optimum conditions were pH 3,ZVI dosage 0.15 g/g dry solid(DS),oxone dosage 0.07 g/g DS and reaction time 10.6 min with the reductions in capillary suction time(CST) and water content(Wc) as 19.67% and 8.49%,respectively.Four conditioning approaches could result in TOC increase in EPS layers and supernatant,and protein(PN) content in tightly bound EPS(TB-EPS).After conditioning,organics in EPS layers could migrate to supernatant.Polysaccharide(PS) was easier to migrate to supernatant than PN.In addition,Acid,Acid-ZVI/PMS or Fe(Ⅱ)/PMS conditioning promoted the release of some polysaccharides containing ring vibrations v P=O,v C-O-C,v C-O-P functional groups from TB-EPS.ESR spectra proved that both radicals of SO_4~-· and·OH contributed to dewatering and organics transformation and migration.CST value of WAS positively correlated with the ratios of PN/PS in LB-EPS and total EPS,while it negatively correlated with TOC,PN content and PS content in TB-EPS,as well as PS content in supernatant and LB-EPS.BWC negatively correlated to zeta potential and TOC value,PN content,and HA content in supernatant.     

Enhanced activity of ZnS(111) by N/Cu co-doping:Accelerated degradation of organic pollutants under visible light

High-efficiency photocatalysts are of great significance for the application of photocatalytic technology in water treatment.In this study,N/Cu co-doped ZnS nanosphere photocatalys(N/Cu-ZnS) is synthesized by a hydrothermal method for the first time.After doping,the tex ture of nanosphere becomes loose,the nanometer diameter is reduced,making the specific surface area of catalyst increased from 34.73 to 101.59 m²/g.The characterization results show that more ZnS (111) crystal planes a...     

用MnSO_4作催化剂开管测定废水COD

本研究介绍了用硫酸锰代替硫酸银作催化剂快速开管测定废水中COD的方法。该方法降低了分析成本 ,且使样品的回流时间缩短到 12min ,而准确度和精密度同标准法基本相同。此法取样量少 ,消解速率快 ,适用于大批量水样的测定。     

PVC包装材料中酞酸酯增塑剂残留的ASE-GC-MS分析

针对PVC包装材料中酞酸酯（PAEs）增塑剂残留，采用加速溶剂萃取（ASE）和GC／MS联用技术分析5种PAEs（DMP，DEP，DBP，BBP，DEHP），结果表明加速溶剂萃取用于PVC包装材料中PAEs的提取，最佳温度条件为120℃，最佳循环次数为3次。方法检出限达到0．1mg／kg，回收率达到95．5％-99．8％；并且具有很好的重现性和精密度。     

一种富稀土型三效催化剂的性能考察

对一种富烯土型三效催化剂的性能进行了考察，结果表明：该催化剂具有较好的三效活性和较好的启燃温度特性，具有较宛的空速适应范围，在空速为84000h^-1时，CO,NOx的转化率仍在90％以上，HC转化率仍在70％以上，该催化剂具有较好的耐老化性能，经实验室快速老化实验，即相当于实车行驶8万km,CO劣化系数，1.09,HC劣化系1．05，NOx劣化系数1．06，该催化剂经桑塔纳轿车整车28工况测试，其交化效果与该车配置的美国Engelherd公司的催化剂相当。     

Cu／A1-Ce-PILC在丙烯选择性催化还原NO反应中的失活研究

采用聚合羟基复合阳离子合成交联黏土A1-Ce-PILC，经SO4^2-改性后，以浸渍法制备了铜基交联黏土催化剂Cu／A1-Ce-PILC，并将其应用于C3H6选择性催化还原NO的反应，350℃时NO转化率达到最大值56％，700℃时下降至22％．为探究催化剂高温失活的原因，采用XPS、TPR、TGA、Py-IR和DSC对反应前后催化剂的物化性能进行了表征．结果表明，经过H2预处理活化后活性组分Cu物种以Cu^＋形式存在，而高温反应后Cu物种除以Cu^＋和Cu^2＋ 2种形式存在外，还出现了少量CuO物种；高温反应过程中A1-Ce-PILC上结构羟基和SO4^2-流失导致催化剂表面酸性减弱；此外，还存在表面积炭覆盖了部分活性中心并堵塞了催化剂孔道的现象．这三者的共同影响促进了C3H6深度氧化，抑制了NO还原，从而导致催化剂的失活．