餐饮泔水油及废动植物油下脚料深加工利用大有可为：介绍《国家级科技成果重点推广计划》高效益环保项目“利用餐饮泔水油及废动植物油生产油酸、甘油、硬脂酸”新工艺

综述了我国的餐饮泔水油及废油脂资源浪费、破坏环境现状，对比介绍了新工艺显著的经济及环保效益。     

精密模锻模具设计

先从三种角度 :锻造设备和工作条件 ,钢材的加热温度和凹模结构形式对精密模锻模具进行分类 ;然后从六个方面讨论精密模锻模具设计要点模膛设计 ,凹模尺寸设计和强度计算 ,凸模尺寸和强度计算 ,模具的导向装置 ,顶出装置及飞边槽尺寸的设计     

公路设计中的环境保护工作

阐述了公路建设中环境保护工作的意义，提出在公路工程勘察设计工作中对环境保护的典型作法和取得的效果。     

Upgrading of organic waste: production of the copolymer poly-3-hydroxybutyrate-co-valerate by Ralstonia eutrophus with organic waste as sole carbon source

Two types of fermented organic waste (trade and industry waste and fruit and vegetable waste) were successfully used as a sole carbon source to produce poly-3-hydroxybutyrate-co-valerate (PHBV) by Ralstonia eutrophus (formerly Alcaligenes eutrophus) via oxygen limitation.The production of PHBV could be optimized by optimizing the oxygen transfer through the fermentor. Thereby, a peak concentration of 1.1 g PHBV per liter cell suspension, 40 w% of cell dry weight, was obtained at an aeration rate of 0.24 mol O₂/h·kg biomass. The yield of PHBV on the fatty acid concentration in the organic waste was 0.16 g polymer/g volatile organic matter. The process obtained, compares well with the commercial production process of PHBV based on glucose.     

运用过程分析法有效推进清洁生产

运用过程分析式清洁生产审计开展清洁生产，通过对工艺过程、作业活动的过程分析，充分查找物料流失环节及废弃物的排放点．不需过多的经济投入解决物料计量问题，不需用物料衡算方法，而且查找细致、全面、有效且易于操作，不易遗漏，更有利于企业的清洁生产。     

Comparison of mesophilic and thermophilic anaerobic digestions of thermal hydrolysis pretreated swine manure: Process performance, microbial communities and energy balance

Anaerobic digestion (AD) of swine manure (SM) commonly shows low biogas output and unsatisfactory economic performance. In this study, thermophilic AD (TAD, 50 ± 1 °C) was combined with thermal hydrolysis pretreatment (THP, 170 °C/10 bar), to investigate its potential for maximizing biogas yield, securing successful digestion and microbial diversity, as well as improving energy balance. Four lab-scale continuously stirred tank reactors were operated for 300 days and compared with each other, i.e., reactor 1 (raw SM fed in mesophilic AD: RSM-MAD), reactor 2 (THP-treated SM fed in MAD: TSM-MAD), reactor 3 (RSM-TAD), and reactor 4 (TSM-TAD). The results showed that THP was efficient to increase methane production of SM, TSM-TAD mode led to the highest methane yield (129.8 ± 40.5 mL-CH₄/g-VS/day) among the tests (p < 0.05). Although TAD was more likely to induce free ammonia (> 700 mg/L) or volatile fatty acids (> 6000 mg/L) accumulation compared with MAD in start-up phase, TSM-TAD treatment mode behaved a sustainable digestion process in a long-term operation. For TSM-TAD scenario, higher Shannon–Weaver (3.873) and lower Simpson index (0.061) indicated this mode ensured and enlarged the diversity of bacteria communities. Phylum Bathyarchaeota was dominant (59.3%−90.0%) in archaea community, followed by Euryarchaeota in the four reactors. RSM-MAD treatment mode achieved the highest energy output (4.65 GJ/day), TSM-TAD was less effective (−17.38 GJ/day) due to increased energy demands. Thus improving the energetic efficiency of THP units is recommended for the development of TSM-TAD treatment mode.     

精密模锻件的设计要点

讨论了精密模锻件的分类密集形状的锻件、盘形锻件和长杆形锻件 ,以及精密模锻件的设计要点精密模锻件的机械加工余量、尺寸精度和表面粗糙度、分模面的选择、模锻斜度、圆角半径、肋的设计和腹板厚度的设计     

逐次回转减薄拉深加工的开发研究

在减薄拉深这一传统加工工艺的基础上，提出了一种新的加工工艺方法，解决了传统工艺中存在的工件易破裂、严重变形等缺陷问题，并且，在获得较大减薄拉深率的前提了，加工力得到大大降低。     

绿色设计方法——设计领域发展的新趋势

 简要地介绍了设计领域发展的新趋势—绿色设计的基本思想，综述了绿色设计各主要研究领域的现状和问题以及发展趋势，阐明了我国开展绿色设计的研究与应用的必要性与可行性．     

略论与电除尘器设计有关的几个问题

作者根据多年从事电除尘器工作的经验，提出了在设计、制造和调试中应充分考虑的诸如原始条件、设备参数选择、结构设计等影响电除尘器性能的各种因素，并从理论上进行分析和论证，以期通过讨论寻求最佳的设计方案和实践效果。