Effect of different design aspects of pipe for earth air tunnel heat exchanger system: A state of art

Earth air tunnel heat exchanger (EATHE) is a promising passive technique to provide thermal comfort condition in buildings. EATHE system uses undisturbed temperature of the ground for heating/cooling of air. Despite the several advantages, this technique has not become much popular owing to its high capital cost (mainly pipe cost and trench excavation cost) and large land area requirements. The primary objective of this study is to present a comprehensive review of different EATHE pipe layouts, pipe properties and positioning of the pipe with their advantages and limitations. It is observed that the ring pipe layout is the most cost-effective pipe-layout for small size EATHE system because it saves excavation cost by using a trench of the existing foundation of the building. However, Grid pipe-layout is an ideal layout for a large size EATHE system. Multi-layer pipe layouts should be used to reduce the land area requirement significantly. Moreover, EATHE system can be installed beneath the building (under building foot-print) to eliminate extra land area requirement for the installation of EATHE system. This review article shows that the Initial capital cost and land area requirement for the EATHE system can be substantially reduced by using appropriate pipe layout. It can be concluded that if EATHE system is installed with proper design strategies, it will be a clean and cost-effective method for building heating/cooling with significant power savings.     

混凝土高温爆裂性能影响因素及预防措施综述

对混凝土高温爆裂成因进行总结,综述高温下混凝土内部蒸汽压力的测试手段、降低混凝土内部蒸汽压力方法、提高混凝土在高温中的抗高温爆裂性能的方法,以及总结了升温速率对混凝土高温爆裂的影响,并提出了几种预防混凝土高温爆裂的措施,为混凝土高温爆裂研究提供依据。     

铁路沿线供暖用低温空气源热泵热力性能对比研究

我国北方铁路沿线站段冬季采暖主要以燃煤锅炉为主,随着冬季雾霾现象日益严重,采用空气源热泵作为北方铁路沿线传统燃煤锅炉供暖的替代方式,对于减少能源消耗、改善大气环境具有重要意义。研究跨临界CO2热回收热泵和回热循环热泵系统2种低温空气源热泵系统,对其热力性能进行了实验和对比分析。结果表明,当环境温度不变时,随着供水温度由45℃升高至55℃,跨临界CO2热回收热泵制热量和COP均升高;随着供水温度由45℃升高至50℃,回热循环热泵制热量和COP均逐渐降低。当供水温度低于50℃时,回热循环热泵COP高于跨临界CO2热回收热泵,回热循环热泵系统的节能效果更为显著;当供水温度超过50℃时,跨临界CO2热回收热泵的性能更优。在低温环境条件下,跨临界CO2热回收热泵系统能够提供更高的供水温度,并有效提升空气源热泵的制热性能,结合我国北方铁路沿线站段的供暖需求和气候条件,提出相较于回热循环热泵系统,跨临界CO2热回收热泵系统的适用性和热力性能更为优越。     

煤自燃特性及自然发火预测预报指标体系研究

以梁宝寺矿3号煤层为背景,采用色谱吸氧法和氧化动力法对其自燃倾向性进行了对比分析。同时,通过煤氧化升温热解实验对其升温过程中各气体随温度的变化规律进行了分析,以实验所得和灰色关联分析所得定性和定量相结合的方式,优选出了不同温度阶段煤自然发火预测预报所对应的第一、第二和第三预测指标,建立了煤自然发火预测预报体系,为有效抑制该矿及同类矿井火灾的发生具有重要意义。     

消解方法对土壤中砷含量测定的影响研究

土壤中总砷的检测方法主要采用原子荧光法测定。样品的消解通常是用微波消解法、水浴消解法和电热板消解法,在这些消解方法中,可以采用不同酸进行消解。所以样品消解过程的不同对土壤中总砷含量的检测结果有至关重要的影响。主要从消解液的种类和加热方式两方面进行研究。结果表明,在准确度方面,加热方式对砷的测定值影响不大,而消解液的选取对结果的影响较大。当消解液是HNO3+HF+HCLO4时,由于样品能完全消解进入溶液中,因此砷的含量测定值较高。     

基于微波热解技术的竹炭、竹醋生产设备研究

基于现有竹炭、竹醋生产工艺流程及工业技术水平,设计了一套具有创新性的竹炭、竹醋生产设备,并给出了设备完整的结构以及包括微波源功率在内的关键制造参数.该设备首次引入微波热解技术代替传统的燃烧加热方法,同时窑炉整体设计遵循节约生产空间、原料充分转化、废气废渣循环处理、热量多级利用、全封闭式生产、自动化控制等节能、环保、高效的思想.此外,在对微波源的设计上依据多源溃能理论,采用以小功率磁控管组合代替大功率磁控管设计,从而大幅降低设备的制造成本,提高微波源的使用寿命及工作稳定性.     

关于酒泉某矿井空气预热系统的探讨

我国矿井空气预热最常用方法之一为空气加热器方法,这类系统在实际运行过程中存在一些问题。通过对酒泉某矿井预热方式分析,提出了此方法在空气设备选型及其布置形式和系统自动控制等方面的一些改进意见。     

废弃印刷电路板回收拆解过程中的气体排放物分析

为研究废弃印刷电路板(PCB)在回收加热拆解电子元件过程中所产生的气体排放物的主要成分,使用自行设计的废弃PCB拆解装置进行拆解实验,采用傅里叶红外光谱(FTIRS)、气相色谱-质谱(GC/MS)、离子色谱(IC)和电感耦合等离子体质谱(ICP-MS)等分析方法,对实验过程所收集到的气体产物进行成分分析.结果表明,废弃PCB的基板在加热过程中发生了初步分解,基板上的溴化环氧树脂发生了O—C、C—C、C—Br键的断裂,产生了苯酚、2,6-二溴苯酚等有机物;伴随有机气体逸出的还有废弃PCB在加热过程所释放的含有大量S、N、Cl、Br等元素的无机酸性气体;而连续的熔锡过程还使得PCB与焊料中的Sn、Pb、Sb、Hg、Cd、Cr等重金属产生烟尘逸出.     

湿热预处理餐厨垃圾的盐分研究

对于盐分的研究是以通过湿热法餐厨垃圾制作适宜益生菌生长基质为目标.研究选取益生菌生长的主要限制因素-盐分进行研究,确定降低盐分浓度的工艺条件.实验通过选取一定温度、加水量和反应时间条件,在高温高压反应釜中反应.研究发现,全盐适宜温度为100℃或140℃,水溶性氯离子和水溶性钠离子适宜温度为50℃;三种离子适宜加水量均为80%;三种离子适宜的反应时间为15 min.研究为餐厨垃圾制作成适宜益生菌生长的工艺奠定了基础,较深入地研究了盐分在预处理过程中的变化情况和趋势.     

Microwave cladding: A new approach in surface engineering

Cladding is generally characterized by partial dilution of the substrate and hence formation of metallurgical bonding between the substrate and the deposits. Laser cladding is one of the most widely practiced surface engineering techniques. The present work mainly focuses on a novel development in surface engineering techniques in the form of microwave cladding. Clads of tungsten carbide (WC) based WC10Co2Ni powder on austenitic stainless steel were produced using microwave hybrid heating. Microwave clads were developed by exposing the preplaced, preheated powder for a duration of 120 s to microwave radiation at 2.45 GHz frequency and 900 W power in a home microwave system. Characterization of the clads was carried out in the form of microstructural and elemental composition studies. Investigations show crack-free interface revealing good metallurgical bond associated with partial dilution of the stainless steel substrate and full melting of WC particles. Typical X-ray diffraction results confirm presence of metallic carbides in the clad which is primarily responsible for significantly higher microhardness of the clad. Process mechanism has been discussed.