供热管道波纹管补偿器裂纹泄漏的分析及对策

通过对热电厂直埋供热管道波纹管补偿器裂纹泄漏事故的调查分析,找出了问题所在,并提出了解决应力腐蚀问题可行的对策.     

国外热防护服装性能测试技术标准研究

热防护服是热环境下人体安全防护的主要装备,其标准的科学性和系统性对热环境下的人体安全防护具有重要的支持作用.国外对热防护服相关的技术标准予以充分重视,以性能测试技术方法为主体,建立了较为科学、完善的标准,并体现出新的发展趋势.通过对国外热防护服技术标准的调研,总结性能测试标准的共性内容,包括主要性能测试方法、实验设备、实验步骤、烧伤评估、人体模型和测试报告等.整套防护服装的性能测试技术及标准是研究的重点,出汗暖体假人将在防护服装性能测试领域被更为广泛的应用.最后,提出我国研制热防护服性能测试技术标准的建议.     

Mathematical methods for application of experimental adiabatic data – An update and extension

The paper represents some results of comparative analysis of the methods used for processing and interpreting data of adiabatic calorimetry as well as applying it to practical situations. Specifically two approaches are compared – approximate method based on evaluation of simplified kinetics and a more comprehensive, simulation-based method that utilizes the evaluation of more detailed kinetic models.The analysis is focused on two important types of data processing – correction of experimental results on thermal inertia (phi-factor correction) and estimation of adiabatic time to maximum rate (TMR).The most widely cited method for phi-factor correction is considered and its improvement is proposed to enable more precise prediction of the adiabatic time scale. A procedure for phi-factor correction of pressure response is also proposed. The limitations of this enhanced Fisher's method are discussed by comparison with simulation-based method. All the illustrative materials are based on real examples.As an example of application, the simplified method will be used to predict TMR and its limitations will be discussed.     

Human Adaptation to Work in Two Different Climates

The processes of acclimation to hot-dry and to warm-humid climates were studied using two approaches: a quantitative analysis of literature data and an experimental study in the laboratory concerning the physiological parameters of heart rate, rectal temperature, sweat loss, and subjective assessment.

Analysis o f literature data: Data from 62 experiments with a total of 813 participants were pooled and recalculated. The experiments ranged from 6 to 24 days, air temperatures from 30.4 to 50.0°C, water vapor pressures from 1.5 to 6.5 kPa, and wet bulb globe temperatures (WBGT) from 27.4 to 38.6°C.

Laboratory studies: In the laboratory, 8 participants were acclimated during 15 consecutive days to a hot-dry climate and to a warm-humid climate, which were equivalent in terms of the WBGT (33.5 and 33.6°C, respectively). The participants walked four times for 25 min on a treadmill at a speed of 4 km/h. The hot-dry climate caused somewhat greater strain than the warm-humid condition. In the course of acclimation to the hot-dry climate, heart rate and rectal temperature started at higher levels, decreased slightly steeper but remained on a higher level throughout. Nevertheless, the differences between both thermal conditions were small, and both physiologic functions reached the point of acclimation almost at the same time under warm-humid and under hot-dry exposure. Sweat loss, which is not regarded as a valid predictor for acclimation, was considerably higher but increased less in the hot-dry than in the warm-humid climate.     

Test of Firefighter’s Turnout Gear in Hot and Humid Air Exposure

Five students of a rescue training school cycled at 50 W for 20 min at 20 °C before walking at 5 km/hr up to 30 min in a climatic chamber at 55 °C and 30% relative humidity. 4 different types of clothing ensembles differing in terms of thickness and thermal insulation value were tested on separate days. All subjects completed 28–30 min in light clothing, but quit after 20–27 min in 3 firefighter ensembles due to a rectal temperature of 39 °C or subjective fatigue. No difference in the evolution of mean skin or rectal temperature was seen for the 3 turnout ensembles. Sweat production amounted to about 1000 g in the turnout gears of which less than 20% evaporated. It was concluded that the small differences between the turnout gears in terms of design, thickness and insulation value had no effect on the resulting heat physiological strain for the given experimental conditions.     

Heat Gain From Thermal Radiation Through Protective Clothing With Different Insulation,Reflectivity and Vapour Permeability

The heat transferred through protective clothing under long wave radiation compared to a reference condition without radiant stress was determined in thermal manikin experiments. The influence of clothing insulation and reflectivity, and the interaction with wind and wet underclothing were considered. Garments with different outer materials and colours and additionally an aluminised reflective suit were combined with different number and types of dry and pre-wetted underwear layers. Under radiant stress, whole body heat loss decreased, i.e., heat gain occurred compared to the reference. This heat gain increased with radiation intensity, and decreased with air velocity and clothing insulation. Except for the reflective outer layer that showed only minimal heat gain over the whole range of radiation intensities, the influence of the outer garments’ material and colour was small with dry clothing. Wetting the underclothing for simulating sweat accumulation, however, caused differing effects with higher heat gain in less permeable garments.     

公共聚集场所防火设计中的火灾场景设计研究

在对公共聚集场所性能化防火设计的基础上,介绍火灾场景设计的内容和方法,通过对火灾荷载和火灾热释放速率的计算,得到火灾发展的变化情况和热释放速率曲线,进而构建适合公共聚集场所等大空间建筑的火灾设定模型。并应用该计算方法和模型对某超市进行火灾场景设定来确定该火灾场景的最大热释放速率,并对其火灾蔓延可能性进行讨论,为火灾危害性评估以及火灾探测和扑救系统的有效性评估提供依据。     

混凝土箱梁水化热温度损伤安全评价模型研究

目前混凝土箱梁0#块在施工过程中出现水化热温度冲击和裂缝现象,严重影响混凝土箱梁结构早期强度的形成以及结构的安全性能.综合考虑混凝土水化热温度荷载和弹模的时变效应,给出时域损伤函数;根据变权分析原理,确定敏感损伤和累积损伤,建立混凝土水化热温度损伤安全评价模型;对混凝土箱梁0#块水化热温度损伤进行三维数值仿真,总结水化热温度损伤时变效应规律,对早期含水化热温度损伤参数的混凝土箱梁结构安全性能进行分析评价.结果表明:混凝土水化热反应速率、水化热温差峰值与损伤速率敏感度、累积损伤敏感度同步.温差峰值过大、水化热反应速率过快,敏感损伤度和累积损伤度增大,安全指标降低,易形成温冲,产生裂缝,导致整体破坏.通过时域损伤函数和安全评价模型可及时分析计算混凝土箱梁0#块的安全指标,指导混凝土箱梁0#块安全施工.     

外界辐射热对浸油沙层着火特性影响研究

通过实验研究了施加辐射热后浸油沙层的着火特性.实验中使用柴油为燃料,沙层为多孔介质,自制的施加辐射热测量闪点和燃点的设备,研究了施加辐射热后,沙油质量比、沙粒直径以及外界辐射热通量对浸油沙层着火特性的影响.结果表明,沙粒直径及沙油质量比不变,随着辐射热通量的增大,浸油沙层的闪点、燃点降低到某一值后不再变化;施加辐射热通量,浸油沙层的闪点、燃点随沙油质量比的增加而升高,不再出现闪点和燃点的最小值点;沙粒直径对浸油沙层的闪点和燃点有影响.     

竹地板与普通实木地板燃烧性能的锥形量热仪对比实验研究

随着竹地板的广泛应用,竹木地板的火灾燃烧性能也将引起人们的关注.本文采用锥形量热仪对竹木地板的引燃时间、热释放速率、总热释放和一氧化碳的产率及体积比浓度等燃烧性能与普通实木地板进行了比较研究.研究结果表明:在相同条件下,竹木地板试样的引燃时间较短,临界引燃辐射热通量较低,引燃危险相对较大;竹木地板试样燃烧中第一个热释放速率峰值出现的时间短,且峰值相对较大,其潜在的轰燃危险相对较大;此外,竹木试样的一氧化碳的产率和燃烧初期在烟气中的体积比浓度相对较大.