垃圾填埋场区域氨氮污染地下水的修复方案比选

早期建设的简易生活垃圾填埋场的防渗措施不足,易发生渗漏,造成填埋场周围地下水的氨氮浓度升高。文章针对华中地区某垃圾填埋场区域氨氮污染地下水,提出抽取处理加异位生物修复、空气注入加原位生物修复两种修复方案,并采用AHP-TOPSIS(层次分析法-逼近理想排序)方法进行方案的比选。在建立合适的比选指标体系基础上,采用AHP-TOPSIS方法进行综合比选研究。结果表明,空气注入+原位生物修复技术更适合于该区域地下水的修复。TOPSIS方法由于缺乏确定评价指标权重的过程,在层次多元分析中的应用受到限制,而AHP是多层次多因素权重确定的有效工具,将二者结合起来,先由AHP确定指标权重,再运用TOPSIS对备选地下水修复方案进行排序,从而弥补了二者各自的不足。AHP-TOPSIS方法可作为环境工作者进行场地修复方案比选的有效工具。     

湖北某重金属污染土壤稳定化/固化治理工程实例

为保证南水北调水源地水质安全,该项工程对湖北省郧县境内4个关停搬迁企业原址约16万m3重金属污染土壤进行了修复治理。污染土壤清挖标准为《展览会用地土壤环境质量标准》(HJ350—2007)A级标准,污染土壤无害化处理验收标准为浸出液浓度低于《地表水环境质量标准》(GB3838—2002)中IV类水体标准值。工程采用异位稳定化/固化技术对重金属污染土壤进行了无害化处理,所用稳定化/固化药剂为施工单位自主研发的硫系和铁系稳定化药剂;无害化处理后的近20万m3土壤采用安全填埋进行处置。工程的成功实施为南水北调库区水质安全提供了有力保障。     

The legacy of surface mining: Remediation,restoration, reclamation and rehabilitation

Surface mining is a global phenomenon. When dealing with the land disturbances caused by surface mining operations, the terms remediation, reclamation, restoration and rehabilitation (R4) are commonly used interchangeably or otherwise vaguely defined. Expectations associated with these terms may differ significantly from one stakeholder to another, however. Regulators, industry, environmental practitioners, local communities and the general public therefore stand to benefit from a precise terminology based on agreed-upon end-goals. The latter range from the avoidance of exposure to pollutants (remediation) to the full recovery of the original ecosystem (restoration). Although frequently claimed as the end-goal, restoration may often not be unachievable, because of altered hydrology, habitat fragmentation, contamination, climate change, prohibitive costs and other environmental and socio-economic boundary conditions. Mostly, the definitions of reclamation and rehabilitation may overlap in their definitions and approaches. Here we attempt the creation of a road-map that can clearly translate end-goals for each of the R4 terms. According to the definitions encountered and exposed here, reclamation, which aims to recover key ecosystem services and biogeochemical functions within a replacement ecosystem or rehabilitation, which implies a repurposing of the landscape, may be the best approaches to deal with surface mining legacies.     

Evaluation of the optimal washing conditions for dioxin-contaminated soils from the circumference of an incinerator

 The optimal soil-washing conditions for dioxins were estimated on a soil sample from the circumference of an incinerator in Nose City, Osaka, Japan. The solvents ethanol, methanol, and acetone, together with a surfactant (100% of each) could extract 40% of the dioxins from contaminated soil at room temperature. From among these solvents, ethanol was chosen for a study on how to optimize the extraction conditions because of its low toxicity and its economic advantages. The time-course of the agitation showed that the extraction rate increased for 1 min, and thereafter the rate decreased. Therefore, the agitation time was fixed at 1 min. To estimate the effect of temperature on the extraction rate, the extraction temperature was changed. The amount of dioxins extracted was largest at the boiling point of ethanol (78.3°C), giving about 76% extraction. Furthermore, at this temperature, almost 100% of the dioxins in the contaminated soil were extracted when the ratio of water to ethanol was 20%. Received: March 6, 2002 / Accepted: September 9, 2002     

污染土壤的物理化学修复技术研究进展

综述了目前国外在污染土壤现场修复中应用较多、效果较好的几种物理化学修复技术。讨论比较了每种修复技术的优缺点和适用范围,提供了研究和应用情况。并结合中国实际展望了今后修复技术的发展。     

环境胁迫因子对固定菌修复污染土壤效果的研究

通过对环境胁迫因子参数的不同设定,对固定菌修复污染土壤效果进行了研究.结果显示,当环境胁迫因子温度(高温40 ℃和低温15 ℃)、酸碱度(pH＝4和pH＝9)及重金属(Cd和Pb)存在时,对固定菌降解污染物的影响并不大,而游离菌降解率却有一定的下降趋势.进一步观察了固定化载体内部微观结构,为固定菌用于有机污染土壤的异位修复提供了一定的理论基础.     

Extraction of arsenic in a synthetic arsenic-contaminated soil using phosphate

An environment-friendly and cost-effective extraction method has been studied for the removal of arsenic from contaminated soil. A yellow-brown forest soil was contaminated with arsenic(V) and used as a model soil. Among various potassium and sodium salts, potassium phosphate was most effective in extracting arsenic, attaining more than 40% extraction in the pH range of 6–8 with minimum damage to the soil properties. Exchange mechanism is proposed for the extraction of arsenic from soil by phosphate. Sequential extraction shows that phosphate is effective in extracting arsenic of Al- and Fe-bound forms. Arsenic of residual form was not extracted. Arsenic was efficiently extracted by phosphate solution of pH 6.0 at 300 mM phosphate concentration and at 40°C.     

Life cycle assessment of active and passive groundwater remediation technologies

Groundwater remediation technologies, such as pump-and-treat (PTS) and funnel-and-gate systems (FGS), aim at reducing locally appearing contaminations. Therefore, these methodologies are basically evaluated with respect to their capability to yield local improvements of an environmental situation, commonly neglecting that their application is also associated with secondary impacts. Life cycle assessment (LCA) represents a widely accepted method of assessing the environmental aspects and potential impacts related to a product, process or service. This study presents the set-up of a LCA framework in order to compare the secondary impacts caused by two conceptually different technologies at the site of a former manufactured gas plant in the city of Karlsruhe, Germany. As a FGS is already operating at this site, a hypothetical PTS of the same functionality is adopted. During the LCA, the remediation systems are evaluated by focusing on the main technical elements and their significance with respect to resource depletion and potential adverse effects on ecological quality, as well as on human health. Seven impact categories are distinguished to address a broad spectrum of possible environmental loads. A main point of discussion is the reliability of technical assumptions and performance predictions for the future. It is obvious that a high uncertainty exists when estimating impact specific indicator values over operation times of decades. An uncertainty analysis is conducted to include the imprecision of the underlying emission and consumption data and a scenario analysis is utilised to contrast various possible technological variants. Though the results of the study are highly site-specific, a generalised relative evaluation of potential impacts and their main sources is the principle objective rather than a discussion of the calculated absolute impacts. A crucial finding that can be applied to any other site is the central role of steel, which particularly derogates the valuation of FGS due to the associated emissions that are harmful to human health. In view of that, environmental credits can be achieved by selecting a mineral-based wall instead of sheet piles for the funnel construction and by minimising the steel consumption for the gate construction. Granular activated carbon (GAC) is exclusively considered as the treatment material, both in-situ and on-site. Here it is identified as an additional main determinant of the relative assessment of the technologies since it is continuously consumed.     

pH dependence of persulfate activation by EDTA/Fe(III) for degradation of trichloroethylene

The ability of free ferrous ion activated persulfate (S₂O₈²⁻) to generate sulfate radicals (SO₄⁻) for the oxidation of trichloroethylene (TCE) is limited by the scavenging of SO₄⁻ with excess Fe²⁺ and a quick conversion of Fe²⁺ to Fe³⁺. This study investigated the applicability of ethylene-diamine-tetra-acetic acid (EDTA) chelated Fe³⁺ in activating persulfate for the destruction of TCE in aqueous phase under pH 3, 7 and 10. Fe³⁺ and EDTA alone did not appreciably degrade persulfate. The presence of TCE in the EDTA/Fe³⁺ activated persulfate system can induce faster persulfate and EDTA degradation due to iron recycling to activate persulfate under a higher pH condition. Increasing the pH leads to increases in pseudo-first-order-rate constants for TCE, S₂O₈²⁻ and EDTA degradations, and Cl generation. Accordingly, the experiments at pH 10 with different EDTA/Fe³⁺ molar ratios indicated that a 1/1 ratio resulted in a remarkably higher degradation rate at the early stage of reaction as compared to results by other ratios. Higher persulfate dosage under the EDTA/Fe³⁺ molar ratio of 1/1 resulted in greater TCE degradation rates. However, increases in persulfate concentration may also lead to an increase in the rate of persulfate consumption.     

Variation in PAH inputs and microbial community in surface sediments of Hamilton Harbour: implications to remediation and monitoring

Variations in concentrations of polycyclic aromatic hydrocarbons (PAHs) and microbial community indicators were investigated in representative highly contaminated and less contaminated surface sediment sites of Hamilton Harbour. Inputs of PAH to the upper 3cm of sediments up to four times the average upper sediment concentrations were observed. Associated PAH fingerprint profiles indicated that the source was consistent with the PAH source to the industrial region of the harbour. Increased PAH loadings were associated with decreased bacterial populations as indicated by phospholipid fatty acid (PLFA) concentrations. However, relatively minor impacts on overall community composition were indicated. Porewater methane concentrations and isotopic data indicated a difference in the occurrence of methane oxidation between the two sites. This study confirms temporally limited transport of contaminants from highly impacted regions as a vector for contaminants within the harbour and the impact on microbial carbon cycling and bed stability.