Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

低温烟气脱氮活性炭基催化剂

活性炭基催化剂是低温烟气脱氮的优良催化剂。本文探讨了活性炭基催化荆的低温脱氮机理，分析了催化荆性能的影响因素，比较了各种催化荆的脱氮机理和性能，在此基础上指出了今后的研究方向。     

烟气低温SCR脱硝技术的现状与展望

电厂烟气SCR脱硝技术存在着投资、运行成本高，难以对旧电厂进行改造等缺点。低温SCR法可以部分克服这些难题，但是现有的低温SCR催化剂脱硝效率差，易受SO2和水蒸气的中毒影响。针对低温SCR的催化剂开发情况和应用实例进行了综述，对该技术下一步的研究进行了展望。     

Effect of MoO3 on vanadium based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

The selective catalytic reduction(SCR) activities of the MoO_3 doped V/WTi catalysts prepared by the incipient wetness impregnation method at low temperature were investigated.The results showed that the addition of MoO_3 could enhance the NO_ xconversion at low temperature and the best SCR activity was obtained when the dosage of MoO_3 reached5 wt.%. The NH3-TPD and DRIFTS experiments indicated that the addition of MoO_3 changed the type and number of acid sites on the surface of catalysts and reaction activities of acid sites were altered at the same time. The redox capacity and amount of active oxygen species got improved for V3Mo5/WTi catalyst, which could be confirmed by the H_2-TPR and transient response experiments. Water vapor inhibited the NO_xconversion at low temperature. Deposition of ammonium sulfate or bisulfate might be main reason for the loss of catalytic activity in the presence of SO_2 at low temperature. Choosing the suitable NH_3/NO ratio and elevation of reaction temperature both could weaken the influence of SO_2 on the SCR activity of the V3Mo5/WTi catalyst. Thermal treatment of the deactivated catalyst at350°C could get the low temperature activity recovered. The decrease of GHSV improved the de NO_x efficiency at low temperature and we speculated that the rational technological process and operation parameters could contribute to the application of this kind of catalysts in real industrial environment.     

Effect of barium sulfate modification on the SO2 tolerance of V2O5 /TiO2 catalyst for NH3-SCR reaction

Sulfur poisoning of V_2O_5/BaSO_4–TiO_2(VBT),V_2O_5/WO_3–TiO_2(VWT) and V_2O_5/BaSO_4–WO_3–TiO_2(VBWT) catalysts was performed in wet air at 350℃ for 3 hr,and activities for the selective catalytic reduction of NO_x with NH_3 were evaluated for 200–500℃.The VBT catalyst showed higher NO_x conversions after sulfur poisoning than the other two catalysts.The introduction of barium sulfate contributed to strong acid sites for the as-received catalyst,and eliminated the redox cycle of active vanadium oxide to some extent,which resulted in a certain loss of activity.Readily decomposable sulfate species formed on VBT-S instead of inactive sulfates on VWT-S.These decomposable sulfates increased the number of strong acid sites significantly.Some sulfate species escaped during catalyst preparation and barium sulfate was reproduced during sulfur poisoning,which protects vanadia from sulfur oxide attachment to a great extent.Consequently,the VBT catalyst exhibited the best resistance to sulfur poisoning.     

燃煤电厂PM2.5微细颗粒物控制新技术——旋转电极式电除尘性能特点及安装技术

本文介绍了燃煤电厂PM2.5微细颗粒物控制新技术——旋转电极式电除尘器的工作原理、性能特点.同时介绍了某电厂330MW机组旋转电极式电除尘改造工程应用实例.在积累多个旋转电极式电除尘器安装调试经验的基础上,介绍了旋转电极式电除尘器安装工艺流程及安装调试技术.     

Kinetics of selective catalytic reduction of NO by NH3 on Fe-Mo/ZSM-5 catalyst

The catalyst of Fe-Mo/ZSM-5 has been found to be more active than Fe-ZSM-5 and Mo/ZSM-5 separately for selective catalytic reduction (SCR) of nitric oxide (NO) with NH3. The kinetics of the SCR reaction in the presence of O2 was studied in this work. The results show that the observed reaction orders were 0.74-0.99, 0.01-0.13, and 0 for NO, O2 and NH3, respectively, at 350-450℃. And the apparent activation energy of the SCR was 65 kJ/mol on the Fe-Mo/ZSM-5 catalyst. The SCR mechanism was also deduced. Adsorbed NO species can react directly with adsorbed ammonia species on the active sites to form N2 and H2O. Gaseous O2 might serve as a reoxidizing agent for the active sites that have undergone reduction in the SCR process. It is also important to note that a certain amount of NO was decomposed directly over the Fe-Mo/ZSM-5 catalyst in the absence of NH3.     

燃煤电厂烟气氮氧化物排放控制技术发展现状

在广泛查阅文献的基础上,对近年来国内外已成功应用和正在研究开发的一些主要的燃煤烟气氮氧化物控制技术进行了介绍。结合我国目前脱硝行业整体水平和国家环保政策要求,对我国脱硝行业技术研发方向提出了建议。     

浅析废烟气脱硝催化剂环境管理

随着"十二五"期间国家对氮氧化物排放的控制越来越严格,选择性催化还原(SCR)烟气脱硝技术被广泛应用于火电厂的脱硝工程。本文介绍我国目前废烟气脱硝催化剂的产生情况、存在的环境风险以及发达国家的管理经验,从而提出我国将废烟气脱硝催化剂纳入危险废物管理,推行危险废物经营许可证制度,加强产生和经营单位的日常监督管理,从而促进行业的健康可持续发展。     

基于TiO2载体的锰铈系低温SCR脱硝催化剂研究进展

开发低温、高活性、高抗硫抗水性能的选择性催化还原(SCR)脱硝催化剂已成为国内外的研究热点。综述了基于TiO2载体的锰铈系低温脱硝催化剂的脱硝性能,探讨了助剂掺杂改性、制备方法、反应条件等对催化剂脱硝性能的影响,总结了现有低温脱硝催化剂的技术难点,指出SCR催化剂的研究需要着重考虑以下几方面:深入研究催化剂的反应机理和中毒机理;研究催化剂的循环再生;探究拓宽催化剂温度窗口,使其适应不同的温度条件。