浅谈哈尔滨市机动车尾气污染现状及应对措施

20世纪90年代,我国由于汽车生产和汽车使用规模不大,汽车尾气污染问题并不突出,城市大气污染主要表现为煤烟型污染。近年来,尤其是进入21世纪后,汽车业发展迅速,机动车保有量逐年迅速增长,汽车产业快速发展的同时,对环境也造成了危害。本文结合哈尔滨市市情,论述了汽车尾气污染现状,提出了应对措施。     

纺织服装全球回收标准概述

纺织服装全球回收标准是由荷兰管制联盟认证机构最初制定,于2008年11月起实施,该认证标准是针对废旧纺织品回收后,再生纤维原料使用时,提供一个全球性认证标准.该标准先后经过3次修订,2014年8月5日,纺织服装全球回收标准（GRS）3.0版颁布.目前已得到各国纺织出口企业的认可.     

浑河沈阳段“十一五”期间水体构成及污染来源分析

介绍了浑河沈阳段"十一五"期间水体的构成,分析了其支流水质状况以及浑河沈阳段主要污染来源。结果表明,支流河是浑河补水的主要来源,污水处理厂尾水已成为支流河和浑河干流的主要补水来源,其中上游径流38%,污水厂排水8%及细河、蒲河、满堂河和白塔保河等5条支流河补水54%;浑河沈阳段污染源数量最多的是农业源,占浑河流域沈阳段污染源的55.33%;其次是生活源,占浑河流域沈阳段污染源的26.19%;再次是工业源,占浑河流域沈阳段污染源的18.43%;最少的是集中式污染治理设施,占浑河流域沈阳段污染源的0.05%。     

大气环境质量功能体系及其评价中的系统观

应用系统理论,论证了环境质量作为一种功能体系存在的客观性,并分析了该体系的基本特点及与人类需求层次相协调的性质,从而将环境质量拓展为一种广义的概念以顺应经济、社会发展和环境科学发展的要求.进而就大气环境质量功能体系,探讨了认识和评价环境质量的一般方法以及系统科学在环境科学领域中的应用.     

基于灰色-马尔科夫模型的我国能源消费结构优化调整

本文以我国1997—2010年的消费结构数据为基础,运用灰色-马尔科夫链模型对数据进行了分析和预测,然后通过MATLAB预测了我国未来十年的能源消费结构,结合我国政府承诺的非化石能源目标对模型预测结果做了进一步的修正,最后根据能源发展趋势给出了能源消费结构的优化策略。     

Loss prevention in turnaround maintenance projects by selecting contractors based on safety criteria using the analytic hierarchy process (AHP)

Turnaround maintenance (TAM) is a usual plant shutdown that is done by process industries to perform asset inspections, repairs, and overhauls. TAM engineering projects are needed on a periodic basis to optimize a plant's performance. Process industrial plants usually don't have enough in-house manpower to carry out needed TAM jobs; it is not uncommon for a process industrial plant to outsource its TAM manpower supply to external contractors. This will create a peculiar management challenge regarding how to assure orientation of safety practices for the newly hired labor. Although accidents during process plant shutdowns may have severe consequences, the safety management systems in place for many companies only cover normal operations and few explicitly address TAM projects. Usually, contractors are evaluated from a safety perspective after handling the project by monitoring safety indicators such as number of injuries, incidents, etc. This paper emphasizes safety attributes to be included in selecting contractors at the bidding stage to assure loss prevention and better safety orientation during TAM implementation. The paper starts with reviewing TAM literature and defining main needed safety attributes to prequalify contractors. It develops an analytic hierarchy process (AHP) model that is applied to rank TAM contractors' selection. A case study is presented for a petrochemical plant in Saudi Arabia to demonstrate the AHP model.     

Dynamic-risk-informed safety barrier management: An application to cost-effective barrier optimization based on data from multiple sources

An integrated approach for performance assessment and management of safety barriers in a systemic manner is needed concerning the prevention and mitigation of major accidents in chemical process industries. Particularly, the effects of safety barriers on system risk reduction should be assessed in a dynamic manner to support the decision-making on safety barrier establishments and improvements. A simulation approach, named Simulink-based Safety Barrier Modeling (SSBM), is proposed in this paper to conduct dynamic risk assessment of chemical facilities with the consideration of the degradation of safety barriers. The main functional features of the SSBM include i) the basic model structures of SSBM can be determined based on bow-tie diagrams, ii) multiple data (periodic proof test data, continuous condition-monitoring data, and accident precursor data) may be combined to update barrier failure probabilities and initiating event probabilities, iii) SSBM is able to handle uncertainty propagation in probabilistic risk assessment by using Monte Carlo simulations, and iv) cost-effectiveness analysis (CEA) and optimization algorithms are integrated to support the decision-making on safety barrier establishments and improvements. An illustrative case study is demonstrated to show the procedures of applying the SSBM on dynamic risk-informed safety barrier management and validate the feasibility of implementing the SSBM for cost-effective safety barrier optimization.     

Flash point of biodiesel/glycerol/alcohol mixtures for safe processing and storage

Mixtures of biodiesel, glycerol, and ethanol/methanol are commonly processed and stored in biodiesel production. In this work, non-ideal models are used to calculate the Flash Points (FPs) of binary and ternary mixtures, using data available from different feedstocks. Despite the fact that biodiesel is considered safer than common diesel fuels, results show a synergistic effect of biodiesel/methanol and biodiesel/ethanol mixtures, resulting in a reduction of the flash point of mixtures to values lower than the ones of pure compounds. Most soluble ternary mixtures were found flammable, the only exception being mixtures with a relatively lower alcohol content (45% mol. ethanol or 42% methanol) at temperature lower than 303 K. Accidental increase in temperature can cause domino effect, due to the higher solubility and the formation of new flammable ternary mixtures.     

A bayesian network-based safety assessment method for solid propellant granule-casting molding process

The safety of the solid propellant molding process is vital for the stable production of high-quality propellants. Failure events caused by abnormal parameters in the molding process may have catastrophic consequences. In this paper, a Bayesian network (BN) model is proposed to assess the safety of the solid propellant granule-casting molding process. Fault tree analysis (FTA) is developed to construct a causal link between process variables and process failures. Subsequently, expert experience and fuzzy set theory (FST) are used to obtain failure probabilities of the basic events (BEs). Based on the mapping rules, FTA provides BN with reliable prior knowledge and a network structure with interpretability. Finally, when new evidence is obtained, the probability is updated with the diagnostic reasoning capability of BN. The results of the sensitivity analysis and diagnostic inference were combined to identify key parameters in the granule-casting molding process, including curing temperature, vacuum degree, extrusion, calendering roll distance, length setting value, holding time, and polish time. The results of this paper can provide effective supporting information for managers to conduct process safety analysis.     

An analysis of the implementation of an environmental management system in a local public administration

The Environmental Management System (EMS) is commonly implemented in private firms. However, on the basis of a strengths, weaknesses, opportunities and threats (SWOT) analysis, our work analyzes the consequences of implementing an EMS within the context of local public administrations, particularly regarding the City Council of Ohanes in Almería (Spain). This is the first European corporation to implement an EMS according to the ISO 14001 Standard, certified by the Spanish Association of Normalization and Certification. Its analysis would be equivalent to the Shumpeterian "market innovator study", so that public administration "followers" can take advantage of the derived benefits and of minimizing the negative effects of such an experience. On the other hand, we show that the economic and environmental advantages derived from the EMS go beyond the activities that the City Council is in charge of. They have spillover effects that extend them to all economic activities in the municipality and these effects are expected to be increased in the medium and long-term perspective. In this paper, we compare the costs and benefits that the municipality obtains in two cases: the City Council implements the EMS or it does not implement it. The main objective of this article is to show the economic and environmental advantages obtained by a municipality when it is only the City Council who is implementing an EMS. It is logical to suppose that this case study can stimulate other municipalities to use this instrument, even if the economic and environmental characteristics of the municipality are different.