纺织工业安全生产特点及安全对策管理

简要分析了纺织工业安全生产的特点及安全管理的难点,从而针对性地应用了安全对策管理,并取得一定成效。     

PRB技术修复铬污染地下水的试验研究

以铬污染地下水为研究对象,用零价铁作为反应介质设计了可渗透反应墙(PRB),对零价铁处理铬污染地下水的处理效果和长期稳定性进行了研究。对不同粒径的铁粉处理效果进行对比,发现铁粉粒径越小,处理效果越好。用铁粉作为PRB反应介质,对PRB处理铬污染地下水的长期稳定性进行了研究。试验结果表明,采用Fe0-PRB原位技术处理铬污染地下水,铁粉粒径越小处理废水的水质越好,但介质粒径越小,反应器渗透系数越小,处理水量显著减少;且铁粉在处理含铬废水时生成了大量的难溶化合物,容易造成填料堵塞,导致铁粉利用效率不高。因此有必要研制铁粉复合填料,增大填料的渗透性,提高填料处理含铬废水时铁粉的利用效率。     

Associations between driver training, determinants of risky driving behaviour and crash involvement

The core aim of the study is to examine associations between formal and informal practical driver training as well as driving experience on the one hand and young drivers’ safety attitudes, self-assessment of driving ability and self-reported driver behaviour on the other hand. An additional aim is to examine the associations between attitudes, self-assessment and behaviour on the one hand and crash involvement on the other hand. The results are based on a self-completion questionnaire survey conducted among a representative sample of Norwegian drivers aged 18–20 years (n = 1419). The results showed that there were small yet significant associations between driver training, on the one hand and traffic safety attitudes and risky driving behaviour on the other hand. The amount of formal driver training was negatively associated with the respondents’ evaluation of their driving skills; although the amount of lay instruction was positively associated with such self-evaluation. The results also showed that attitudes as well as self-assessment of driving ability were significantly associated with self-reported risk behaviour. This was especially true for attitudes related to rule violations. There was a strong association between crash involvement and exposure (measured as months holding a licence). Young novice drivers’ crash involvement seems stronger associated with driving skills (manifested as self-assessment of driving ability) than safety attitudes and self-reported driver behaviour. The consequences of the results for driver training and accident prevention are discussed.     

Efficacies of roadway safety improvements across functional subclasses of rural two-lane highways

Introduction

Highway crash occurrence is a leading cause of unnatural deaths, and highway agencies continually seek to identify engineering measures to reduce crashes and to assess the efficacy of such measures. Most past studies on the effectiveness of roadway improvements in terms of crash reduction considered all rural two-lane sections as a single category of roads. However, it may be hypothesized that the differences in the mobility and accessibility characteristics that are reflected in (and due to) the different design standards between different functional subclasses in the rural two-lane highway system can lead to differences in efficacies of safety improvements at these subclasses. This paper investigates the efficacy of roadway improvements, in terms of crash reduction, at the various subclasses of rural two-lane highways.

Methods

An empirical analysis of safety performance at each of the three subclasses of rural two-lane highways was carried out using the negative binomial modeling technique. For each subclass, crash prediction models were developed separately for the three levels of crash severity: property-damage only, injury, and fatal/injury. The crash factors that were considered include lane width, shoulder width, pavement surface friction, pavement condition, and horizontal and vertical alignments. After having developed the safety performance functions, the effectiveness (in terms of the extent of crash reduction, for different levels of crash severity) of highway safety enhancements at each highway subclass were determined using the theoretical concepts established in past literature. These enhancements include widening lanes, widening shoulders, enhancing pavement surface friction, and improving the vertical or horizontal alignment.

Results and Conclusion

The study found that there is empirical evidence to justify the decomposition of the family of rural two-lane roads into its constituent subclasses for purposes of analyzing the effectiveness of safety enhancement projects and thus to avoid underestimation or overestimation of benefits of safety improvements at this class of highways.     

The impact of the BP Baker report

Introduction

This study examined the impact of the British Petroleum (BP) Baker Panel Report, reviewing the March 2005 BP-Texas City explosion, on the field of process safety.

Method

Three hundred eighty-four subscribers of a process safety listserv responded to a survey two years after the BP Baker Report was published.

Results

Results revealed respondents in the field of process safety are familiar with the BP Baker Report, feel it is important to the future safety of chemical processing, and believe that the findings are generalizable to other plants beyond BP-Texas City. Respondents indicated that few organizations have administered the publicly available BP Process Safety Culture Survey. Our results also showed that perceptions of contractors varied depending on whether respondents were part of processing organizations (internal perspective) or government or consulting agencies (external perspective).

Conclusions

This research provides some insight into the beliefs of chemical processing personnel regarding the transportability and generalizability of lessons learned from one organization to another.

Impact on Industry

This study has implications for both organizational scientists and engineers in that it reveals perceptions about the primary mechanism used to share lessons learned within one industry about one major catastrophe (i.e., investigation reports). This study provides preliminary information about the perceived impact of a report such as this one.     

Development of an indirect-cost calculation model suitable for workplace use

Introduction: Occupational Health and Safety (OHS) stakeholders rarely factor the cost of workplace accidents into prevention spending decisions. The lack of consideration of this key information is related to the fact that the scientific literature has failed to provide OHS stakeholders with a cost-calculation tool that is both sufficiently accurate and does not require a data-collection stage ill-suited to the time constraints of workplace decision-makers. Method: This study reviews the recent literature to identify key elements that should foster the use of indirect-cost calculation methods by decision makers. Results: A “local” approach currently appears to be the best method for calculating indirect costs of workplace incidents or accidents in comparison to “bottom-up” or “top-down” approach. This paper discusses four criteria that this type of approach must satisfy to be compatible with the time constraints and accuracy demands of OHS stakeholders in organizations. In addition, four bases for the development of a new indirect cost estimation model are presented and discussed. Impact on industry: this study provides bases and criteria to help the development of indirect-cost calculation models better suited to workplace use than those currently available.     

Reliability assessment of safety instrumented systems subject to different demand modes

Safety instrumented systems (SISs) are commonly used in the process industry, to respond to hazardous events. In line with the important standard IEC 61508, SISs are generally classified into two types: low-demand systems and high-demand systems. This article explores this classification by studying the SIS reliability for varying demand rates, demand durations, and test intervals. The approach is based on Markov models and is exemplified by two simple system configurations. The SIS reliability is quantified by the probability of failure on demand (PFD) and the frequency of entering a hazardous state that will lead to an accident if the situation is not controlled by additional barriers. The article concludes that very low-demand systems are similar and may be treated as a group. The same applies to very high-demand system. Between these group, there is a rather long interval where the demand rate is neither high-demand nor low-demand. These medium-demand systems need a specific treatment. The article shows that the frequency of entering into a hazardous state increases with the demand rate for low-demand systems, while it is nearly independent of both the demand rate and the demand duration for high-demand systems. The PFD is an adequate measure for the SIS reliability for low-demand systems, but may be confusing and difficult to interpret for high-demand systems.