A review on different pipeline fault detection methods

Pipeline faults like leakage and blockage always create problem for engineers. Detection of exact fault quantity and its location is necessary for smooth functioning of a plant or industry and safety of the environment. In this paper brief discussion is made on various pipeline fault detection methods viz. Vibration analysis, Pulse echo methodology, Acoustic techniques, Negative pressure wave based leak detection system, Support Vector Machine (SVM) based pipeline leakage detection, Interferometric fibre sensor based leak detection, Filter Diagonalization Method (FDM), etc. In this paper merit and demerits of all methods are discussed. It is found that these methods have been applied for specific fluids like oil, gas and water, for different layout patterns like straight and zigzag, for various lengths of pipeline like short and long and also depending on various operating conditions. Therefore, a comparison among all methods has been done based on their applicability. Among all fault detection methods, Acoustic reflectometry is found most suitable because of its proficiency to identify blockages and leakage in pipe as small as 1% of its diameter. Moreover this method is economical and applicable for straight, zigzag and long, short length pipes for low, medium and high density fluid.     

露天采矿过程粉尘产生环节及污染治理措施分析研究

粉尘是露天采矿过程的主要污染物之一,露天采矿中粉尘要达到环保要求,需要从生产过程中的凿岩、爆破、装卸、运输、堆存各环节进行污染控制.采用对上述各生产环节中的粉尘产生原理进行分析的方法,找出各个生产环节粉尘的主要产生点,通过对比前人在各个生产环节粉尘控制的研究成果,找出控制粉尘产生的主要影响因素,总结出露天采矿中各个环节上技术经济上最有效的粉尘防治措施,为露天矿山开采污染防治提供系统的解决方案.通过对前人研究成果的总结,汇总形成一套完善的粉尘控制方案.     

大气边界层中起尘、降尘过程的模拟实验的相似性原则

风洞模拟实验是研究起、降尘过程最有效的手段。前人只研究了低湍流度气流中,平坦表面的实际起尘过程。作者提出一组扩展的相似性原则,用于模拟大气边界层湍流及复杂地形对趋、降尘过程的影响及防尘风障在此条件下的减尘效率,并得到一系列有意义的结果。      

Implementation and evaluation of the Safety Element Method at four mining sites

The Safety Element Method (SEM) is a method for improvements of safety results and safety approaches in the Norwegian mining industry. The method is developed by users and researchers in co-operation. The main approach of the method is that a group of organisational members assesses the current and desired situation for their own organisation within defined areas. Based on this assessment they work out a strategy and action plan to reach the internal goals for desired achievement, i.e. the desired situation defined. This article presents the implementation of the method in four mining companies and evaluates the method for its construct validity, criterion validity, face validity, how the method functions and is accepted among the users. The results show that the opinions regarding the experiences with the method are, on the whole, positive. The method is regarded as a valuable approach towards safety improvements. Subjective assessments play a prominent role in SEM, but these assessments are supported by an extensive review of empirical data such as accident reports, interview results and a questionnaire. This means that the internal assessments correspond well to the safety results of the companies and also to the independent external reviews carried out by the researcher.     

起重机在特殊工况下的静刚度与动刚度安全性分析

通过对一台桥式电磁起重机静刚度和动刚度的理论计算,以及对其主梁的探伤检查,分析了桥式起重机在特殊工况下的静刚度和动刚度,指出了在设计时应考虑的安全性问题。     

炸药及火工品可靠性与安全性评定方法

可靠性的评定结果是否可信,直接关系到炸药及火工品的使用安全性和作用可靠性。但是,现有炸药及火工品可靠性评定方法却存在着达不到置信度要求、评价结果偏于危险的缺点。为此,提出了一种确定炸药及火工品安全度和可靠度的高精度方法,并给出了应用实例。该方法不仅可信程度高,而且适用于小样本情况,尤其是在利用了以往试验数据后,既可提高安全性和可靠性评定的精度,又可大大节省试验的费用及时间     

关于“安全工程”专业本科教育的教改探讨

在讨论目前安全工程本科教育存在问题的基础上,提出了以培养安全工程专业的高级技术管理人才为培养目标。通过对各种能力需求的分析,还提出了课程设置的框架和实践环节的内容。强调了工厂安全评价与规划、产品安全设计两门课程的重要性,以保证安全卫生“三同时”制度的实施,并讨论了培养安全工程人才的各种模式。     

大型原油储罐设计中主要安全问题及对策

大型原油储罐储量很大,潜在危险性高,一旦发生事故,损失将十分惨重。为此,在分析了大型原油储罐工程危险性的基础上,重点论述了大型原油储罐设计中的主要安全问题及其对策,包括储罐地基和基础、浮顶储罐密封装置、信号报警联锁系统、排水设计、防腐蚀措施等,特别针对大型原油储罐的特点,详细讨论了浮盘沉底事故原因并介绍了预防浮盘沉底的设计要求,为工程设计提供了有价值的参考依据。     

在役压力容器缺陷处理

介绍了在役压力容器常见缺陷以及它们的处理方法。     

浅谈建设监理中的安全控制

目前我国大中型建设项目和国家重点工程都实行了建设监理制,在控制工程质量、安全、造价和工期等方面均取得了很大成效。本文阐述了建设监理中安全控制的内容,并针对施工中的不安全因素提出了预防对策。