自然保护区生态旅游管理规划的基本原则

针对在自然保护区发展生态旅游存在许多问题，诸如自然环境破坏、自然资源匮乏、环境污染、生物多样性减少、管理不完善等问题，提出了在自然保护区发展生态旅游的基本原则。     

Landfill gas - a potential environmental hazard

Methane derived from the decomposition of organic material contained within a landfill may escape beyond the site boundary where it can pose an explosion or fire hazard. Methods are described to prevent die occurrence of such lateral gas migration. Problems due to the accumulation of gas in buildings, erected on landfill sites, have occurred and techniques are now available to overcome these at some sites. However, it is recognized that at other sites, redevelopment should not be allowed to take place on die grounds of safety.     

基于配额指标重要性视角的中国碳排放配额再分配

提出用与碳排放“同步变化程度”来衡量配额指标重要性的思想,对中国各省份碳排放配额进行再分配.首先在公平和效率原则基础上选取碳排放的影响因素作为分配指标,其次采用灰色关联分析法分别测算出各地区各指标与碳排放量的同步变动程度,以得到各地区各指标在配额分配中的比重.最后测算出我国29个省区2020~2030年的碳排放配额与排放空间.结果表明,人口基数及经济发展指标对各地碳排放有较强的同步变动关联性,因此应该被赋予更高的权重;配额最多的地区包括广东、北京、江苏、山东、上海,最少的地区则包括宁夏、贵州、青海、吉林、新疆.盈余分析发现,北京地区的碳排放空间有较多盈余;浙江等5个省区已达较饱和状态;山东等4个省区则处于较严重的溢出状态,在未来10年内需承担较重的减排压力.     

Addressing the challenges of implementing safety instrumented systems in multi-product batch processes

Adapting the requirements of IEC 61511 to a batch system can be frustrating, particularly for multi-product units. While a Safety Instrumented System (SIS) for continuous operation is often a straightforward detect-decide-act loop, implementing a SIS for a batch system may involve multiple safety functions, time- or state-dependence, intricate calculations, or complex installations. Relationships between the SIS elements and the basic process control system (BPCS) must be tightly managed, providing both for the safety of the unit and its ability to operate without spurious trips or other hindrances. These issues are further complicated when multiple products requiring different functions or setpoints are produced in the same SIS-protected batch unit.This paper will discuss the challenges particular to the design, operation, and maintenance of a SIS in multi-product batch operations and present practical options for successfully resolving the concerns. A key insight into successful adaptation is treating the batch SIS as a “permission” system for the BPCS to operate. Although many items can be addressed through clever engineering practices, sustainable success relies on proactive, robust management of the safety lifecycle.     

Effect of ignition position on vented hydrogen–air deflagration in a 1 m3 vessel

This study investigates the effect of the ignition position on vented hydrogen-air deflagration in a 1 m³ vessel and evaluates the performance of the commercial computational fluid dynamics (CFD) code FLACS in simulating the vented explosion of hydrogen-air mixtures. First, the differences in the measured pressure-time histories for various ignition locations are presented, and the mechanisms responsible for the generation of different pressure peaks are explained, along with the flame behavior. Secondly, the CFD software FLACS is assessed against the experimental data. The characteristic phenomena of vented explosion are observed for hydrogen-air mixtures ignited at different ignition positions, such as Helmholtz oscillation for front ignition, the interaction between external explosion and combustion inside the vessel for central ignition, and the wall effect for back-wall ignition. Flame-acoustic interaction are observed in all cases, particularly in those of front ignition and very lean hydrogen-air mixtures. The predicted flame behavior agree well with the experimental data in general while the simulated maximum overpressures are larger than the experimental values by a factor of 1.5–2, which is conservative then would lead to a safe design of explosion panels for instance. Not only the flame development during the deflagration was well-simulated for the different ignition locations, but also the correspondence between the pressure transients and flame behavior was also accurately calculated. The comparison of the predicted results with the experimental data shows the performance of FLACS to model vented mixtures of hydrogen with air ignited in a lab scale vessel. However, the experimental scale is often smaller than that used in practical scenarios, such as hydrogen refueling installations. Thus, future large-scale experiments are necessary to assess the performance of FLACS in practical use.     

安全经济学应用原理及新观点

安全经济学理论急需加速发展,才能适应新时期安全发展的新需要。论文运用理论研究和逻辑思辨方法,依据从实践到理论的原则,在简述有关安全经济学核心原理的基础上,归纳出安全经济问题的人性假设原理、现实安全经济问题的时空边际预设原理等14条安全经济学应用原理及一些推论,并基于安全经济学应用原理提出了安全是一种资源并可引申为一种等效生产要素、资本或产品的新观点。研究结果对发展安全经济学理论和创新安全管理模式等具有重要的理论和实际意义。     

Thermal runaway reaction for highly exothermic material in safe storage temperature

Highly exothermic materials have caused many serious accidents involving storage and transportation, due to being thermally reactive. The safe storage and management of these materials is still a critical problem in many countries. Our aim was to study the thermal hazard of thermal reactive materials, such as a propellant, by employing differential scanning calorimetry (DSC) non-isothermal tests and isothermal tests, and then comparing the kinetic parameters by isothermal and non-isothermal of kinetics. The chosen approach was to obtain reliable thermal decomposition by a safe and effective method, which acquired the kinetic and safety parameters of storage conditions that could be applied as highly exothermic materials' reduction of loss prevention and energy potential for safer design during storage transport and processing operations.     

Gas explosion analysis of safety gap effect on the innovating FLNG vessel with a cylindrical platform

After investigating gas dispersion on a cylindrical Floating Liquefied Natural Gas (FLNG) platform (Li et al, 2016), this second article focuses on assessment of gas explosion by using Computational Fluid Dynamics (CFD). Gas explosion simulations are carried out to evaluate the explosion overpressure mitigating effect of safety gap. The Data-dump technique, which is an effective tool in resetting turbulence length scale in gas explosion overpressure calculation, is applied to ensure simulation accuracy for the congestion scenario with safety gap. Two sets of different safety gaps are designed to investigate the safety gap on the cylindrical FLNG platform, the overall results indicate that the safety gap is effective in reducing overpressure in two adjacent congestions. However, for the explosion scenario where the flame is propagating through several safety gaps to the far field congestion, the safety gap mitigates overpressure only in certain explosion protecting targets. Two series of artificial configurations are modeled to further investigate the explosion scenarios with more than two safety gaps in one direction. It is concluded that the optimal safety gap design in overpressure mitigation for the cylindrical FLNG platform is to balance the safety gap distance ratio in the congested regions.     

Procedure for assessing hardware safety integrity in legacy systems

Functional safety is related to the safety functions of a safety-related system that uses electrical/electronic/programmable (E/E/PE) devices such as sensors, logic solvers, and final elements. A legacy system is a safety-related system which offers safety functions but which was not designed to comply with the IEC 61508 standard. This paper presents a procedure for assessing the hardware safety integrity of a legacy system so as to confirm its functional safety. The procedure defines the systematic relationship between the safety function and hardware system using a function-structure map (FSM) and assesses the hardware safety integrity centered on the safety function. The proposed procedure is applied to a boiler control system of a fossil-fuel power plant.     

Study of mechanical aspects of leak tightness in a pressure relief valve using advanced FE-analysis

This paper presents a numerical study involving the deformation of contact faces in the metal-to-metal seal in a typical pressure relief valve. The valve geometry is simplified to an axisymmetric problem, which comprises a simple geometry consisting of only 3 components. A cylindrical nozzle, which has a valve seat on top, contacts with a disk, which is preloaded by a compressed linear spring. All the components are made of AISI type 316N(L) steel defined using the multilinear kinematic hardening model based on monotonic and cyclic tests at 20° C. In-service observations show that there is a limited fluid leakage through the valve seat at operational pressures about 90% of the set pressure, which is caused by the fluid penetrating into surface asperities at the microscale. Nonlinear FEA in ANSYS using the fluid pressure penetration (FPP) technique revealed that there is a limited amount of fluid penetrating into gap, which is caused by the plastic deformation of the valve seat at the macroscale. Prediction of the fluid pressure distribution over the valve seat just before the valve lift is addressed in this study considering the FPP interaction on multiscale. This is the principal scope, since it allows adjustment of the valve spring force in order to improve the leak tightness.