聚能药包在岩石控制爆破技术中的应用研究

聚能爆破技术是岩石控制爆破技术中有待开发的领域。根据爆炸力学、岩石断裂力学理论,从当前控制爆破面临的问题入手,对线性聚能药包(Linear shaped charge)在岩石定向断裂爆破中裂纹的产生、扩展以及主要爆破参数进行了分析研究,并利用自制线性聚能药包在巷道掘进中进行了试验。试验结果是聚能药包形成的巷道轮廓外爆震裂隙不明显,巷道断面平整,凹凸量不超过50mm,眼痕率高达96%以上,经济和社会效益明显。这些均表明聚能爆破是一种理想的定向断裂控制爆破技术。     

风电机组与民爆危险品建筑物间安全防护距离的研究与选定

针对风电机组选址与民爆企业安全管理的突出矛盾,研究分析了风电机组和民爆危险品建筑物间安全距离设定的原则和方法,深入剖析了重大危险影响因素,并结合现行标准规范和国外相关规定及经验做法,估算了安全距离值,探讨了安全距离设定的可能性、合理性和适应性,提出了安全距离设定的建议和参照依据。     

我国粉尘爆炸事故原因及预防对策

论述了我国粉尘爆炸事故的分类和宏观发展趋势，分析了造成粉尘爆炸事故多发的原因，提出了预防粉尘爆炸事故的对策。     

粉尘爆炸反应工程学简要综述

１９９３年在波兰召开的第五届国际粉尘爆炸学术会议上，邓煦帆曾在论文中提议建立粉尘爆炸反应工程学，并提出学科的目的意义、性质、主要组成部分和研究方法。本文拟将国内外有关本学科范围内的贡献，加以简要综述，以期能逐渐形成本学科的自身体系和特点。     

Metals recycling in the United States

Twenty-two metals for which secondary recovery is important, in terms of quantity and/or value, were compared and ranked for rate and efficiency of recycling, and availability of recycled metal. In general, their recycling rates trended upward over the period 1970–1993. Iron, aluminum, copper, gold, platinum, and lead accounted for most of the value of all secondary metal produced, while iron and steel dominated in terms of quantity produced and exported. The factors most influential on recycling rates are profitability, public support, organization of infrastructure, sortability, legislative support, and scrap purity. The share of supply accounted for by secondary metals is expected to surpass that of primary metals sometime in the next decade.     

气体、粉尘爆炸灾害及其安全技术

对可燃性气体、蒸汽、粉尘的爆炸特性及其抑爆、隔爆安全技术进行了系统的研究 ,并对常见的可燃性气体、蒸汽和粉尘的各种爆炸特性参数和气体抑爆安全技术参数进行了实验测定。根据实验测定结果得到的结论对这种可燃性物质的安全应用具有重要的参考价值     

旋风除尘器静动态强度分析

对旋风除尘器在静态载荷下的强度进行了分析,发现头部顶板是较薄弱部件。通过动态载荷系数（ＤＬＦ）方法,研究了旋风除尘器承受动态粉尘爆炸压力载荷时提高使用强度的可能性,结果表明,一般情况下,由于载荷的动态特性导致设备强度的变化可以忽略。     

锚索拉断火花引爆瓦斯的实验研究

设计了锚索拉断火花引爆瓦斯实验装置 ,在瓦斯浓度为爆炸范围的环境中 ,对锚索拉断时产生火花规律及引起瓦斯爆炸的可能性进行了一系列实验研究。结果表明 :锚索拉断产生火花的概率为 5 0 % ,锚索钢绞线破断产生的火花不能引起瓦斯爆炸。采用红外热成象仪对锚索拉断火花温度的测试表明 ,锚索拉断产生的火花最高温度远小于瓦斯爆炸所需的最低点燃温度 6 5 0℃。     

热爆炸理论在粉尘爆炸机理研究中的应用

笔者对粉尘爆炸的几种机理进行了简要分析 ,认为粉尘爆炸是由热爆炸引起的。在对粉尘燃烧过程作了较为合理的假设后 ,将热爆炸理论中均温系统的热爆炸判据 ,应用于粉尘爆炸中 ,得出了爆炸下限与粉尘粒径呈线性关系的结论 ,且与实验符合 ,并推导出粉尘的热爆炸判据。结果表明 :用热爆炸理论来解释粉尘爆炸机理是可行的。     

Material cycles in Asia: especially the recycling loop between Japan and China

In this article, we clarify the current status of Japanese exports and Chinese imports of secondary resources. A total of around 10 million metric tons (t) of secondary resources are exported annually from Japan to China, Hong Kong, and Korea. Hong Kong plays the role of a transshipment point, especially regarding the trade in plastic waste, and China imports much from the USA and Japan, often through Hong Kong. The secondary resources exported from Japan include both byproducts from manufacturing processes and end-of-life products or materials. The great demand in China, and the difference in prices between countries, drive this transboundary shipment, although Japan has enacted various recycling laws that were implicitly intended to promote domestic recycling. In China, the imported secondary resources are recycled, usually by means of primitive and low-cost hand labor. The greatest concern is whether there are still improper (illegal or polluting) recycling activities in China. International material cycles should prevent environmental pollution and ensure efficient resource utilization. To that end, the following measures are needed: cooperative control of the trade of secondary resources between countries, the alignment of domestic laws with the regulations in other countries based on the actual trade activities, and the realization of sound practices for global resources management.