酒精-沼气双发酵耦联系统同步脱氨除硫工艺

木薯燃料酒精-沼气双发酵耦联系统中,蒸馏废液含有一定浓度的硫酸盐和有机氮。经传统厌氧生物处理,所产生的氨和硫化氢不仅对厌氧处理体系中的微生物具有毒害作用,还会对酒精发酵酵母的生长和代谢产生不良影响。因此,对蒸馏废液厌氧脱氨除硫新工艺的研究具有重要意义。文章以厌氧流化床为反应器,对模拟废水中的氨和硫酸盐的同步去除进行了研究。模拟废水中含有氯化铵和硫酸钠,分别作为电子供体和电子受体,以葡萄糖作为唯一碳源。实验运行83 d,反应器有机容积负荷降至0.4 kg(/m.3d),SO42-和NH4+-N进水浓度分别升高至676 mg/L和200 mg/L。COD、硫酸盐和氨氮的去除率分别达到93.50%、67.22%和58.28%;氨和硫酸盐去除的摩尔比约为2:1,并在反应器出水中检测到了单质硫的存在,且其含量随反应进行不断增加。这些结果证明了厌氧流化床体系中同步脱氨除硫反应的存在。另外通过对不同阶段实验结果的分析初步探讨了该反应的机理。     

IC反应器处理啤酒废水的效能及其微生物群落动态分析

在35℃下连续运行内循环厌氧反应器(IC),通过不断提高进水容积负荷,研究不同运行负荷下反应器处理模拟啤酒废水的运行情况,并探讨微生物的种群结构与其活性变化之间的相互关系.IC反应器效能分析表明其最大进水容积负荷(以COD计)可达20 kg.(m3.d)-1,COD去除率为85%以上,最大比产甲烷活性(以VSS计)可达210 mL.(g.d)-1;污泥脱氢酶活性与细菌DGGE图谱表明反应器中脱氢酶活性的变化趋势与细菌DGGE条带总光强度的变化趋势一致,DGGE图谱中细菌条带的总光密度值可作为厌氧体系中生物量的一个参考指标;辅酶F420与古细菌DGGE分析表明,污泥中辅酶F420含量与甲烷鬃菌属(Methanosaeta sp.)的相对丰度有一定的相互联系,在低负荷条件下甲烷八叠球菌属(Methanosarcina mazei)优势地位比较显著,随着负荷的提高,甲烷鬃菌属(Methanosaeta sp.)优势地位逐渐显著,且辅酶F420含量随之升高,当最大负荷为20kg.(m3.d)-1时,辅酶F420的含量(以VSS计)达到0.16μmol.g-1,而此时甲烷鬃菌属(Methanosaeta sp.)占据尤为明显的优势地位;聚类分析(UPGAMA)和Shannon指数也表明在不同反应负荷下,微生物的群落结构变化明显.     

交替好氧/缺氧运行模式对生物脱氮效能及活性污泥胞外聚合物的影响

以实际生活废水为处理对象,考察了SBR工艺好氧/缺氧(O/A)和缺氧/好氧(A/O)运行模式对生物脱氮性能、胞外聚合物(extracellular polymeric substance,EPS)及其组分(蛋白质PN、多糖PS和核酸DNA)的影响.结果表明,O/A和A/O运行模式下,SBR工艺均获得了高效稳定的NH_4~+-N去除,去除率分别为97.5%和98.0%,且硝化速率与NH_4~+-N负荷呈现较好正相关性.交替缺氧/好氧运行模式对于EPS影响,A/O模式下EPS产量略高于O/A模式下,且运行模式对TB-EPS及其组分(PN、PS和DNA)产量无显著影响,但A/O模式下LB-EPS及其组分(PN和PS)产量均高于O/A模式下,倍数介于1.38~1.56之间.2种模式条件下,PS是TB-EPS和EPS的主要组分,而PN是LB-EPS的主要成分.EPS含量与污泥沉降性能具有良好的线性正相关.     

Analysis of floc morphology in a continuous-flow flocculation and sedimentation reactor

The floc morphology was investigated in a continuous-flow reactor, in order to understand the evolution of flocs in practical flocculation and sedimentation processes in water utilities. Kaolin-humic acid suspension was used as the test water, and polyaluminum chloride was chosen as the coagulant. An in-situ recognition system was applied to analyze the floc size, boundary fractal dimension, and eccentricity ratios. Particle numbers and turbidity were also determined in the sedimentation stage. At a coagulant dose of 1 mg/L as Al, the average floc size increased from 62 to 78 μm and the boundary fractal dimension was around 1.14, suggesting that flocs were compact and continuously grew during the entire flocculation process. However, with the dose increased to 5 mg/L, the average floc size decreased and stabilized at around 65 μm, with the fractal dimension of 1.20. It can be concluded that the excess coagulant doses resulted in the formation of chain-shaped, lower density, and more branched structure flocs, thereby restricting flocs' further growth in the subsequent flocculation. Floc morphology analysis suggested that charge neutralization dominated in the initial flocculation stage, then the bridge and sweep mechanisms were dominant in the subsequent flocculation. In addition, compared with the traditional inclined plate settler, a novel V-shaped plate settler introduced in this study had an advantage in small size floc(less than 5 μm) removal. The V-shaped region could promote aggregate restructuring and re-flocculation; therefore, the V-shaped plate settler provides an alternative method for sedimentation.     

Drinking water treatment using a submerged internal-circulation membrane coagulation reactor coupled with permanganate oxidation

A submerged internal circulating membrane coagulation reactor(MCR) was used to treat surface water to produce drinking water. Polyaluminum chloride(PACl) was used as coagulant,and a hydrophilic polyvinylidene fluoride(PVDF) submerged hollow fiber microfiltration membrane was employed. The influences of trans-membrane pressure(TMP), zeta potential(ZP) of the suspended particles in raw water, and KMnO_4 dosing on water flux and the removal of turbidity and organic matter were systematically investigated. Continuous bench-scale experiments showed that the permeate quality of the MCR satisfied the requirement for a centralized water supply, according to the Standards for Drinking Water Quality of China(GB 5749-2006), as evaluated by turbidity(1 NTU) and total organic carbon(TOC)(5 mg/L)measurements. Besides water flux, the removal of turbidity, TOC and dissolved organic carbon(DOC) in the raw water also increased with increasing TMP in the range of 0.01–0.05 MPa. High ZP induced by PACl, such as 5–9 mV, led to an increase in the number of fine and total particles in the MCR, and consequently caused serious membrane fouling and high permeate turbidity.However, the removal of TOC and DOC increased with increasing ZP. A slightly positive ZP, such as 1–2 mV, corresponding to charge neutralization coagulation, was favorable for membrane fouling control. Moreover, dosing with KMnO_4 could further improve the removal of turbidity and DOC, thereby mitigating membrane fouling. The results are helpful for the application of the MCR in producing drinking water and also beneficial to the research and application of other coagulation and membrane separation hybrid processes.     

SBR反应器厌氧氨氧化系统启动过程中细菌群落结构的变化

以白洋淀岸边带沉积物为接种污泥,启动了SBR厌氧氨氧化反应器.对反应器启动过程中的进出水水质进行了连续监测,并采用PCRDGGE、定量PCR和基因测序等分子生物学技术研究了系统内总细菌和厌氧氨氧化(ANAMMOX)细菌群落结构随培养时间的变化规律.结果表明:在启动过程中,总微生物菌群动态变化水平为26.6%~50.5%;微生物多样性先变小后增大,优势菌种得到重新分布;ANAMMOX细菌的群落结构变得单一化,最后系统的优势ANAMMOX细菌是Brocadia属.富集培养阶段SBR系统中ANAMMOX细菌的最大生物量达到了1.73×109copies·g~(-1)干污泥,而且总氮的去除率最高达到约82%.     

两种不同抑制策略下部分亚硝化系统运行特性比较

为研究如何控制部分亚硝化系统的稳定性,在高氨氮负荷[1 kg·(m~3·d)~(-1)]和不同的双重抑制策略下启动并连续运行两个序批式反应器(sequencing batch reactors,SBRs).结果表明在温度35℃±1℃,进水氨氮负荷为1 kg·(m~3·d)~(-1)的条件下,FA和DO的双重抑制和FNA和DO的双重抑制均可成功实现高氨氮废水稳定的部分亚硝化,出水NO-2-N/NH+4-N接近1,NO-3-N浓度接近于零,满足ANAMMOX反应的进水基质要求.R1反应器在DO和FA的控制策略下,亚硝氮氧化速率从28.16mg·(g·h)~(-1)减小到0.3 mg·(g·h)~(-1)(以NO-2-N计,下同),而氨氧化速率减小43.60%,最终稳定在20 mg·(g·h)~(-1)(以NH+4-N计,下同)左右.R2反应器在DO和FNA的控制策略下,亚硝氮氧化速率从12.37 mg·(g·h)~(-1)降至0.02 mg·(g·h)~(-1),而氨氧化速率仍维持在较高水平[45 mg·(g·h)~(-1)].DO和FNA双重抑制的系统与DO和高FA双重抑制的系统相比,具有富集时间短,AOB活性高,运行稳定性强等优点,更适用于启动部分亚硝化系统及维持系统稳定性.     

盐度对EGSB反应器的运行及厌氧颗粒污泥的影响

高盐废水通常含有高COD浓度,难以处理,引用具有耐盐性能的生物反应器处理高盐废水成为必要.使用模拟高盐废水在3.267 kg·(m~3·d)~(-1)的COD容积负荷下,将Cl~-浓度逐步从0提升至10 000 mg·L~(-1),研究盐度对膨胀颗粒污泥床(expanded granular sludge bed,EGSB)反应器的影响.结果表明,Cl~-浓度小于7 500 mg·L~(-1)时,对微生物的抑制作用较低;Cl~-浓度为7 500 mg·L~(-1)时,反应器的COD去除率能保持在98.1%左右,容积产气率能够基本保持在1.3 m~3·(m~3·d)~(-1)以上,大粒径的厌氧颗粒污泥仍然占据体系的主体;当Cl~-浓度为10 000 mg·L~(-1)时,反应器中的厌氧颗粒污泥受到严重影响.采用高通量测序技术对0和5 000 mg·L~(-1)两个Cl~-浓度下的厌氧颗粒污泥的微生物菌群结构进行分析,结果表明,盐度影响了微生物的种群分布,在5 000 mg·L~(-1)的Cl~-浓度下,主要的优势菌属由Cl~-浓度为0时的Methanoregula与Longilinea变为Methanobacterium、Methanospirillum、Methanothrix和Paludibacter.     

ABR工艺ANAMMOX耦合短程硝化协同脱氮处理城市污水

厌氧氨氧化技术如能替代市政污水厂的主流工艺,将大幅降低市政污水处理能耗.故采用ABR反应器,构建除碳系统、短程硝化系统和厌氧氨氧化系统,将三者耦合成一体化短程硝化-厌氧氨氧化反应器进行城市污水脱氮.结果表明,ABR除碳系统的HRT为4.5 h时,其出水COD平均浓度为80 mg·L~(-1),不会对后续短程硝化系统产生不利影响,出水TN平均浓度为10mg·L~(-1),厌氧氨氧化系统TN容积负荷为0.36 kg·(m~3·d)~(-1).当控制DO为1~2 mg·L~(-1)时,亚硝化率能长时间维持在90%左右,有利于保证后续厌氧氨氧化系统的稳定运行.当控制温度为30℃左右,好氧区DO为1~2 mg·L~(-1)良时,短程硝化-ANAMMOX一体化ABR工艺可以对城市污水稳定高效地脱氮.     

不同COD浓度下低基质厌氧氨氧化的启动特征

采用厌氧序批式反应器(ASBR)处理NH4+-N和NO2--N浓度分别为(25. 00±0. 40) mg·L~(-1)和(33. 00±0. 60) mg·L~(-1)的模拟废水,在温度为30℃时,投加乙酸钠控制COD浓度分别为5. 00、15. 00、30. 00和50. 00 mg·L~(-1),研究对厌氧氨氧化启动的影响.结果表明:①4种COD浓度下分别经过74、94、106和129 d均能成功启动厌氧氨氧化. COD浓度为15. 00 mg·L~(-1)和30. 00 mg·L~(-1)时,反应器脱氮性能较好,稳定运行后,平均出水NH4+-N浓度分别为1. 98 mg·L~(-1)和1. 89 mg·L~(-1),平均出水NO2--N浓度低于0. 62 mg·L~(-1),平均出水TN浓度分别为2. 37、2. 28 mg·L~(-1);②启动过程中反硝化对脱氮的平均贡献率逐渐降低至4. 78%、9. 59%、10. 21%和36. 50%,厌氧氨氧化对脱氮的平均贡献率逐渐上升至95. 22%、90. 41%、89. 79%和63. 50%;③厌氧氨氧化活性分别在第44、76、86和114 d时超过反硝化活性,最后分别达到0. 700、0. 690、0. 670和0. 510mg·(g·h)~(-1),反硝化活性分别为0. 110、0. 130、0. 240和0. 410 mg·(g·h)~(-1).该研究结果可为厌氧氨氧化技术在实际工程中的应用提供参考.