环境中重金属和有机污染物的物种敏感性分布研究进展

物种敏感性分布法(SSD,Species Sensitivity Distribution)是一种相对于传统评价因子法具有更高置信度的统计学外推方法,在环境质量基准制定及生态风险评价中得到广泛应用。本文对近年来国内外重金属和有机污染物的物种敏感性分布研究成果进行了综述,阐述了在水体、土壤和沉积物等环境介质中应用SSD方法开展生态风险评价的研究现状,从SSD模型选择、毒性数据点筛选等方面对影响SSD模型不确定性的因素进行探讨,并对SSD方法在生态风险评价领域的应用进行了展望。     

基于GIS的深圳市坪山新区生态敏感性评价及其应用研究

十八大以来,优化国土空间开发格局成为生态文明建设的内容之一。基于GIS的生态敏感性评价可以将评价对象的生态系统特征与空间开发格局有机联系起来,从土地利用的角度对生态文明建设提供发展建议。在总结相关研究的基础上,以深圳市坪山新区为例,结合生态文明建设规划要求和地区实际,采用GIS技术对生态敏感性进行评价,选取4个评价因子,利用层次分析法(AHP)确定敏感性因子权重,采用最大值法对生态敏感性及空间分布进行了定量化分析,按照生态敏感性的高低将研究区域划分为高敏感区、中敏感区、低敏感区和非敏感区4个等级。结果表明,该方法可以为坪山新区生态文明建设规划的国土空间开发格局优化提出分区保护与建设的对策建议。     

土地利用变化下的生态系统服务敏感性研究——以克里雅绿洲为例

通过剖析传统的敏感性分析法,提出交叉敏感性概念,评价生态服务价值对土地利用类型转换的响应性。以克里雅绿洲为研究区域,以1991、2002 和2011 年三期遥感影像数据为基本信息源,运用交叉敏感性分析,计算生态系统服务价值对土地利用类型转换的敏感性,确定生态系统日趋敏感的土地利用变化过程,为土地管理对策提供参考依据。研究结果表明:20 a来,克里雅绿洲生态服务价值较敏感的土地利用转换类型相对稳定,主要集中在湿地和水体向荒漠和低覆盖度草地的转换;与1991 和2011 年相比,2002 年的交叉敏感性系数普遍上升,这主要是因为湿地、水体面积的减少加剧了研究区的生态脆弱性,从而表现出更大的敏感性;湿地和水体向耕地转换的交叉敏感性一直处于上升趋势,并不断接近于-1,表明生态服务价值对高强度的人为活动变得越来越敏感,从而警示地方管理部门采取必要措施制止此种转换的持续。     

Sensitivity of SCS Models to Curve Number Variation1

ABSTRACT: The Soil Conservation Service (SCS) models, including the TR-20 computer program and the simplified methods in TR-55, are widely used in hydrologic design. The runoff curve number (CN), which is an important input parameter to SCS models, is defined in terms of land use tretments, hydrologic, condition, antecedent soil moisture, and soil type. The objective of this study was to evaluate the sensitivity of the SCS models to errors in CN estimates. The results show that the effects of CN variation decrease as the design rainfall depth increases, such as for the larger storm events. The value and use of the sensitivity curves are demonstrated using a comparison of Landsat and conventionally derived curve numbers for three watersheds in Pennsylvania.     

LOCATION OF MUNICIPAL WELL FIELDS IN AN ENVIRONMENTALLY SENSITIVE REGION1

ABSTRACT: A visual selection technique can be utilized to locate potential well field sites prior to on-site testing. The technique is based upon an understanding of the regional hydrology and an appreciation for development goals such as the identification of high-yield and low-impact locations. Although the uniqueness of Pasco, Pinellas, and Hillsborough Counties in Western Florida has been incorporated into the current application, the methodology, with modifications, is transferable to other geographic regions. Overlays of each criterion used in site selection are combined to form a regional composite showing favorable site locations and further serve a useful communications role as visual aids during public presentation. Implications of direct and indirect cost savings to the public are obtained when the methodology is applied to the location of municipal well fields.     

炭黑/聚苯乙烯复合材料在环境监测方面的应用

制备炭黑/聚苯乙烯(CB/PS)导电气敏复合材料。实验结果表明:复合材料在多种有毒有害有机蒸汽中都有很好的电阻气敏响应性。因此,炭黑/聚苯乙烯导电复合材料在用作气体传感器和电子鼻方面检测空气中的气体污染具有广阔的应用前景。     

EFFECT OF WATERSHED SUBDIVISION ON SWAT FLOW,SEDIMENT, AND NUTRIENT PREDICTIONS1

ABSTRACT: The size, scale, and number of subwatersheds can affect a watershed modeling process and subsequent results. The objective of this study was to determine the appropriate level of subwatershed division for simulating flow, sediment, and nutrients over 30 years for four Iowa watersheds ranging in size from 2,000 to 18,000 km² with the Soil and Water Assessment Tool (SWAT) model. The results of the analysis indicated that variation in the total number of subwatersheds had very little effect on streamflow. However, the opposite result was found for sediment, nitrate, and inorganic P; the optimal threshold subwatershed sizes, relative to the total drainage area for each watershed, required to adequately predict these three indicators were found to be around 3, 2, and 5 percent, respectively. Decreasing the size of the subwatersheds below these threshold levels does not significantly affect the predicted levels of these environmental indicators. These threshold subwatershed sizes can be used to optimize input data preparation requirements for SWAT analyses of other watersheds, especially those within a similar size range. The fact that different thresholds emerged for the different indicators also indicates the need for SWAT users to assess which indicators should have the highest priority in their analyses.     

A HYBRID OPTIMIZATION APPROACH TO THE ESTIMATION OF DISTRIBUTED PARAMETERS IN TWO-DIMENSIONAL CONFINED AQUIFERS1

ABSTRACT: In using non-linear optimization techniques for estimation of parameters in a distributed ground water model, the initial values of the parameters and prior information about them play important roles. In this paper, the genetic algorithm (GA) is combined with the truncated-Newton search technique to estimate groundwater parameters for a confined steady-state ground water model. Use of prior information about the parameters is shown to be important in estimating correct or near-correct values of parameters on a regional scale. The amount of prior information needed for an accurate solution is estimated by evaluation of the sensitivity of the performance function to the parameters. For the example presented here, it is experimentally demonstrated that only one piece of prior information of the least sensitive parameter is sufficient to arrive at the global or near-global optimum solution. For hydraulic head data with measurement errors, the error in the estimation of parameters increases as the standard deviation of the errors increases. Results from our experiments show that, in general, the accuracy of the estimated parameters depends on the level of noise in the hydraulic head data and the initial values used in the truncated-Newton search technique.     

丁烷与空气混合物的爆炸性能测定

在不同条件下,对丁烷与空气混合物进行爆炸实验,由微机数采测试系统测定其爆炸参数（爆轰波压力、爆轰波传播速度等）、爆轰极限以及当其形成爆轰时所需的临界起爆能。通过实验测定,为评价丁烷与空气混合物的安全性能提供重要依据     

SENSITWITY ANALYSIS OF SIMULATED CONTAMINATED SEDIMENT TRANSPORT1

ABSTRACT: A simulation analysis of contaminated sediment transport involves model selection, data collection, model calibration and verification, and evaluation of uncertainty in the results. Sensitivity analyses provide information to address these issues at several stages of the investigation. A sensitivity analysis of simulated contaminated sediment transport is used to identify the most sensitive output variables and the parameters most responsible for the output variable sensitivity. The output variables included are streamflow and the flux of sediment and Cs¹³⁷. The sensitivities of these variables are measured at the field and intermediate scales, for flood and normal flow conditions, using the HSPF computer model. A sensitivity index was used to summarize and compare the results of a large number of output variables and parameters. An extensive database was developed to calibrate the model and conduct the sensitivity analysis on a 6.2 mi² catchment in eastern Tennessee. The fluxes of sediment and Cs¹³⁷ were more sensitive than streamflow to changes in parameters for both flood and normal flow conditions. The relative significance of specific parameters on output variable sensitivity varied according to the type of flow condition and the location in the catchment. An implications section illustrates how sensitivity analysis results can help with model selection, planning data collection, calibration, and uncertainty analysis.