北方泥炭地泥炭土矿化速率、温度敏感性及其影响因素研究

北方泥炭地是全球重要的碳汇,也是全球变暖最为敏感的区域之一.然而,由于泥炭地表层和亚表层泥炭土碳排放过程对全球变暖的响应过程及机制仍存在一定争议,目前对全球变暖背景下泥炭地碳排放的认识仍存在一定不足.本研究于2019年8月在大兴安岭满归泥炭地采集表层(0～10 cm)和亚表层(15～30 cm)泥炭土进行室内增温模拟有氧培养,测定其矿化速率、有机质性质和水解酶活性.结果表明,表层泥炭土矿化速率在5、15、25℃下培养时((142.8±66.9)～(545.3±30.6)、(575.0±62.1)～(1843.0±547.4)、(888.4±123.9)～(3646.7±167.9)μg·g^-1·d^-1)均高于亚表层((113.0±41.5)～(367.1±64.1)、(357.4±52.3)～(1122.1±218.8)、(697.1±38.1)～(2336.4±150.6)μg·g^-1·d^-1),但表层和亚表层矿化作用的温度敏感性不具有显著差异;培养过程中,表层与亚表层泥炭土β-1,4-N-乙酰葡...     

核电厂核事故应急疏散研究

根据我国法规、标准与美国核管委对核电厂核事故应急疏散的要求,考虑我国核电厂特殊的厂址条件与社会环境,分析核事故应急疏散的可行性。通过应急疏散行为研究、厂区的交通需求估计和路网分析,对不同情境,考虑核事故应急疏散的特殊问题,分别采用人工容量分析与宏观仿真模拟得到应急疏散时间。针对某核电厂,给出核事故应急疏散分析的一般步骤、方法与计算结果。对宏观仿真模型的主要参数进行灵敏度分析,找出影响应急疏散时间的主要因素,提出缩短应急疏散时间的针对性措施。     

Effect of Planning for Connectivity on Linear Reserve Networks

Although the concept of connectivity is decades old, it remains poorly understood and defined, and some argue that habitat quality and area should take precedence in conservation planning instead. However, fragmented landscapes are often characterized by linear features that are inherently connected, such as streams and hedgerows. For these, both representation and connectivity targets may be met with little effect on the cost, area, or quality of the reserve network. We assessed how connectivity approaches affect planning outcomes for linear habitat networks by using the stock‐route network of Australia as a case study. With the objective of representing vegetation communities across the network at a minimal cost, we ran scenarios with a range of representation targets (10%, 30%, 50%, and 70%) and used 3 approaches to account for connectivity (boundary length modifier, Euclidean distance, and landscape‐value [LV]). We found that decisions regarding the target and connectivity approach used affected the spatial allocation of reserve systems. At targets ≥50%, networks designed with the Euclidean distance and LV approaches consisted of a greater number of small reserves. Hence, by maximizing both representation and connectivity, these networks compromised on larger contiguous areas. However, targets this high are rarely used in real‐world conservation planning. Approaches for incorporating connectivity into the planning of linear reserve networks that account for both the spatial arrangement of reserves and the characteristics of the intervening matrix highlight important sections that link the landscape and that may otherwise be overlooked. El Efecto de la Planeación para la Conectividad en Redes de Reservas Lineales     

Improving lake riparian source area management using surface and subsurface runoff indices

Sensitivity indices, which rank factors pertinent to surface and subsurface runoff pathways, were used to identify phosphorus source areas in riparian zones of 15 northern Minnesota lakes. Watershed models were first developed using a geographic information system (GIS). Empirical models were then developed correlating water quality with land use, lake morphometry, and riparian sensitivity. Base models of forested, cultivated, pasture/open, wetland and residential land use within 100, 200, 400, and 2000 m of the study lakes were regressed on total phosphorus and chlorophyll-a. Area-weighted groundwater and surface runoff sensitivity indices were then incorporated into each model and tested for significance. Within the 200-m buffer, the total phosphorus base model was improved by including the groundwater index alone. The chlorophyll-a base model at 200 m was improved by including: (1) the groundwater index alone, and (2) both the groundwater and surface runoff sensitivity indices. Results suggest that surface and subsurface runoff analysis of potential source areas can improve decision making for lake riparian management.     

COMPARATIVE WATER CHEMISTRY OF FOUR LAKES IN ROCKY MOUNTAIN NATIONAL PARK1

ABSTRACT: The inorganic chemistry of two pairs of lakes in Rocky Mountain National Park was studied to determine reasons for their similarities and differences. The pairs were located on differing geologic units. It was expected that weathering from the different types of parent material would cause differing cation concentrations between the pairs. This was verified by dissimilar concentrations of those cations which are products of primary weathering. Unexpected was a significant difference in anion concentrations between members of one pair having the same bedrock geology. This difference has been attributed to the presence of a wet sedge meadow above one of the lakes which serves as a biological filter for anions, particularly nitrate and sulfate. It is shown that small scale drainage characteristics which can alter regional atmospheric contributions are important contributors to lake chemistry.     

ACCURACY AND RELIABILITY OF NUMERICAL RIVER MODELS1

ABSTRACT: Over the last 20 years, our possibilities to model river flows numerically have increased enormously. In this paper, the question is addressed whether a more sophisticated model is always better than a simpler one. Increased detail, both in finer resolution and in physical processes taken into account, has its price in more computer time, higher data need, and perhaps more unknown coefficients to be calibrated. Moreover, uncertainty in actual physical conditions (e.g., bottom roughness), inflow and parameters remains, which may dominate the uncertainty of the results. Also, the questions asked by a decision maker may not always be very precise. For a schematic but relevant example, we show that a better model does not necessarily give more reliable results because some of the basic uncertainties remain. It is concluded that we should use the simplest model that will answer the question as to the accuracy needed, taking into account uncertainties in the data     

Sensitivity of Ozone Production to the Nmhc Composition, Aerosol Back-Scattering and High Chimney Emission

In this paper, three sensitivity studies are designed to analyze the effect of the NMHC (Non-Methane HydroCarbon) composition, the aerosol back-scattering and the high chimney NO_x emission to the photochemical prodution of ozone by using a one-dimensional photochemistry-diffusion model under a favourable meteorological condition. Measurements of the NMHC composition in Taipei indicated that the percentage of iso-butene, cis-2-butene, trans-2-butene and benzene in a unit volume was much higher than of those observed in other major cities. the high ratio of benzene was directly linked to its high percentage in gasoline. As to the unusually high amount of iso-butene, cis-2-butene and trans-2-butene, more researches are needed to identify their source. Concerns are raised as to how productive is NMHC composition is to the photochemical production of the surface ozone. A rough estimate shows that the total reactivity of the Taipei NMHC composition is about 1.21 × 10^-9 cm³ s^-1 which is 1.6 times that of the Los Angeles (LA) NMHC composition, while the simulated noon peak will be different by 28 ppbv, i.e. 18% more than that simulated with a LA composition.

Meanwhile, high aerosol loading is a serious problem in Taipei. the attenuation of the UV radiation by aerosols cannot be ignored. A numerical simulation shows that the noon ozone level will decrease from 178 to 141ppbv, i. e. about 21% reduction, with deterioration of the visual range from 85 to 5 km.

In the southern Taiwan, industry parks are mixed with the populated Kaohsiung city, hence the large emission of NO_x from high chimneys cannot be ignored. in this study, NO_x is assumed to be emitted in the layer between 235-460 m high with an emission rate of 0.05 or 0.145 ppbv/sec. the results show that the NO_x emitted from the elevated stack lead to a considerable reduction of surface ozone. Such conclusion is obtained due to the fact that a one-dimensional model is used in this paper. Whereas, if a three-dimensional regional model was used, then a higher productivity of ozone downstream would be simulated.     

COMPARISON OF ALTERNATIVE ENGINEERING DESIGNS1

ABSTRACT: Procedures are presented for comparing and evaluating alternative engineering designs for a particular water resources project. By using certain aspects of fuzzy set theory, it is possible to introduce both quantitative and qualitative considerations into the decisionmaking process. In addition, the viewpoints of the various interest groups involved with the water resources development can be realistically incorporated by the evaluation techniques for the alternative designs. Methods are given for eliminating undesirable alternatives and thereby obtaining a reduced set of possible feasible solutions to the problem. Because of the flexibility of the evaluation methods, the viable alternatives should not only satisfy economical, technical. environmental and other types of constraints, but these possible solutions should be politically feasible as well. A method is formulated for checking the sensitivity of the feasible results with respect to the factors that are considered in the analysis.     

OBSERVATIONS ON KINEMATIC RESPONSE IN URBAN RUNOFF MODELS1

ABSTRACT: This paper first discusses the results of sensitivity analyses conducted on various parameters of the San Francisco Stormwater Model ta version of WREM) and the Penn State Runoff Model in terms of their impact on outflow hydrographs. The parameters considered within a idealized catchment include: basin shape, imperivous fraction, overland roughness and slope: deterntion depth; infiltration capacity; and hyetograph timing. Second, the results for the hypothetical catchment are extended to the lazzard laboratory surfaces (asphalt, grass, roofing material) as a mean of illustrating the need for changes in model structure, as opposed to continued parameter adjustment Finally the effect of altering the scale of hydraulic representation in the surface runoff and sewer transport calculations are demonstrated for two gaged watersheds in Hamburg, West Germany.     

ANALYZING THE IMPACT OF LAND USE ON SEWER SERVICE AREA PLANNING1

ABSTRACT: The density and distribution of land uses has important consequences for the planning of sewerage systems and for the costs of these systems. This paper examines these consequences using a simplified service area model. The model determines the area to be served by a central waste treatment plant, where alternative on-lot disposal systems are also available. The model is applied to various urban area configurations, which are summarized by their total populations and by their population density distributions. Both minimum regional cost and minimum local cost service area configurations are determined. In addition, the sensitivity of the model to the parameters of the cost and population density functions is assessed. It is found that the model is most sensitive to the parameters of the collection cost function.