油指纹快速分析辅助鉴别及油品信息可视化管理系统

针对海上溢油事故排查鉴别的需求,开发了一套油指纹数据管理和鉴别软件系统,系统包括综合信息数据库和数据分析鉴别两大组成部分。开发的数据库用来存储基础地理信息、油样空间信息、油样基本信息、油样二维谱图数据、油样特征指纹数据等。指纹分析鉴别模块实现了油样谱图的准确积分、特征指纹指标计算、油样比对鉴别、油样分类鉴别、油样检索排查等功能。系统开发完成后,在黄渤海多次溢油事故中得到了很好的应用,具有高效性和可靠性,极大提高了溢油事故排查工作的效率,为海上溢油事故执法调查提供了重要的技术支撑。     

基于事故统计分析的城市轨道交通运营安全和可靠性研究

本文通过对城市轨道交通运营事故的统计分析,研究了影响轨道交通运营安全和可靠性的主要因素,并构建了城市轨道交通运营安全保障体系,以为提高轨道交通运营安全和可靠性的研究提供依据。     

基于悬臂梁力学模型分析高边坡危岩体的稳定性——以四川省三清村高边坡W1危岩体为例

四川省苍溪县三清村高边坡的稳定性对当地居民的人身安全构成了威胁,需要对高边坡进行稳定性分析和评价。本文针对三清村高边坡自来水厂段W1危岩体,采用悬臂梁力学模型对其稳定性进行了定量计算及分析,结果表明:将计算所得的W1危岩体截面的最大剪切应力与截面允许的最大剪切应力进行对比,可以判断W1危岩体在自然条件下处于稳定状态,在暴雨和地震条件下处于不稳定状态,该结果与野外的宏观判断结论基本一致。     

Body mass estimations for <Emphasis Type="Italic">Plateosaurus engelhardti</Emphasis> using laser scanning and 3D reconstruction methods

Both body mass and surface area are factors determining the essence of any living organism. This should also hold true for an extinct organism such as a dinosaur. The present report discusses the use of a new 3D laser scanner method to establish body masses and surface areas of an Asian elephant (Zoological Museum of Copenhagen, Denmark) and of Plateosaurus engelhardti, a prosauropod from the Upper Triassic, exhibited at the Paleontological Museum in Tübingen (Germany). This method was used to study the effect that slight changes in body shape had on body mass for P. engelhardti. It was established that body volumes varied between 0.79 m³ (slim version) and 1.14 m³ (robust version), resulting in a presumable body mass of 630 and 912 kg, respectively. The total body surface areas ranged between 8.8 and 10.2 m², of which, in both reconstructions of P. engelhardti, ∼33% account for the thorax area alone. The main difference between the two models is in the tail and hind limb reconstruction. The tail of the slim version has a surface area of 1.98 m², whereas that of the robust version has a surface area of 2.73 m². The body volumes calculated for the slim version were as follows: head 0.006 m³, neck 0.016 m³, fore limbs 0.020 m³, hind limbs 0.08 m³, thoracic cavity 0.533 m³, and tail 0.136 m³. For the robust model, the following volumes were established: 0.01 m³ head, neck 0.026 m³, fore limbs 0.025 m³, hind limbs 0.18 m³, thoracic cavity 0.616 m³, and finally, tail 0.28 m³. Based on these body volumes, scaling equations were used to assess the size that the organs of this extinct dinosaur have.     

搅拌-序批式活性污泥反应器(WSBR)中好氧颗粒污泥的特性研究

为研究搅拌-序批式活性污泥反应器(WSBR)中好氧颗粒污泥的特性,利用WSBR反应器与传统SBR反应器对好氧活性污泥颗粒化的过程进行了比较.结果表明,在添加同量的聚炳烯酰胺(PAM)条件下,具有合理二次流场的WSBR反应器在4d就可见好氧颗粒污泥,而SBR反应器则在第10d才出现好氧颗粒污泥,且WSBR反应器中好氧颗粒...     

基于卫星遥感与地面监测分析北京大气NO_2污染特征

分析了1999—2010年北京大气NO2地面质量浓度、2004年以来北京及周边NO2柱浓度的变化.结果表明：1999—2007年来北京大气NO2质量浓度以升高为主.2008年实施奥运空气质量保障措施极大地缓解了北京NO2污染状况,地面质量浓度与垂直柱浓度都出现不同程度的回落.2009年北京大气NO2污染又有所反弹,但低...     

挥发回转窑处置钢丝绳行业污泥的污染物排放研究

通过利用挥发回转窑处置钢丝绳行业污泥的工业化试验,测定了烟气排放参数及污染物排放指标,分析了污泥添加对挥发回转窑烟气排放的影响程度及各项污染物指标之间的相关性。结果表明,污泥添加量18%～22%,对挥发回转窑烟气排放无影响,烟尘、SO2、氮氧化物、Zn、Pb、HCl等各项污染物指标均符合国家控制标准;烟尘排放浓度与Pb、Zn排放浓度呈显著正相关;SO2排放浓度与烟气含氧量、空气过剩系数、排放浓度呈显著负相关。通过控制烟气中烟尘浓度可减少Zn、Pb的排放,在满足SO2排放浓度达标的同时,还应加强工艺供氧量的管理,控制的产生,减少烟气对生产设备的腐蚀。     

造纸污泥综合利用热电项目验收监测难点及对策

近年来,随着环境监测技术规范化建设的不断发展,国家环保部相继出台了包括火力发电、水泥制造、汽车制造、造纸工业在内的12个不同行业类型的建设项目竣工验收技术规范。然而,造纸污泥综合利用热电项目验收监测尚未列入规范编制日程,其中工程调查、标准制定、点位布设和报告编制等环节仍存在一定误区和难点。文章例从上述薄弱环节入手,对常见难点问题提出了相应的解决办法,可供广大环境监测工作者参考和借鉴。     

Nitrogen mass balance in a constructed wetland treating piggery wastewater effluent

The nitrogen changes and the nitrogen mass balance in a free water surface flow constructed wetland （CW） using the four-year monitoring data from 2008 to 2012 were estimated. The CW was composed of six cells in series that include the first settling basin （Cell 1）, aeration pond （Cell 2）, deep marsh （Cell 3）, shallow marsh （Cell 4）, deep marsh （Cell 5） and final settling basin （Cell 6）. Analysis revealed that the NH4＋-N concentration decreased because of ammonification which was then followed by nitrification. The NO4＋-N and NO4＋-N were also further reduced by means of microbial activities and plant uptake during photosynthesis. The average nitrogen concentration at the influent was 37,819 kg/year and approximately 45% of that amount exited the CW in the effluent. The denitrification amounted to 34% of the net nitrogen input, whereas the accretion of sediment was only 7%. The biomass uptake of plants was able to retain only 1% of total nitrogen load. In order to improve the nutrient removal by plant uptake, plant coverage in four cells （i.e., Cells 1, 3, 4 and 5） could be increased.     

SBR法处理低C/N污水的工程应用——以某基地污水处理站改造工程为例

低C/N污水的生化处理过程中,由于碳源不足,不能满足硝化和反硝化的要求,造成出水NH3-N超标。采用SBR工艺对某基地污水处理站厌氧处理后的低C/N污水进行改造,处理后出水COD去除率达到97%以上,NH3-N去除率达到93%以上。