Upgrading of organic waste: production of the copolymer poly-3-hydroxybutyrate-co-valerate by Ralstonia eutrophus with organic waste as sole carbon source

Two types of fermented organic waste (trade and industry waste and fruit and vegetable waste) were successfully used as a sole carbon source to produce poly-3-hydroxybutyrate-co-valerate (PHBV) by Ralstonia eutrophus (formerly Alcaligenes eutrophus) via oxygen limitation.The production of PHBV could be optimized by optimizing the oxygen transfer through the fermentor. Thereby, a peak concentration of 1.1 g PHBV per liter cell suspension, 40 w% of cell dry weight, was obtained at an aeration rate of 0.24 mol O₂/h·kg biomass. The yield of PHBV on the fatty acid concentration in the organic waste was 0.16 g polymer/g volatile organic matter. The process obtained, compares well with the commercial production process of PHBV based on glucose.     

县域生态功能区划研究——以桐柏县为例

结合桐柏县的实例,对县域生态功能区划分的原则和方法进行初步探讨.综合利用3S技术对县域生态敏感性和生态服务功能重要性的分析和评价,提出桐柏县生态服务功能区划的初步方案.将桐柏县划分为生态支持区,产品供给区,生态调节区.简要分析了各功能区在桐柏县经济可持续发展中的地位和作用,指出各区协调发展的方向和途征.     

In situ preparation of g-C3N4/Bi4O5I2 complex and its elevated photoactivity in Methyl Orange degradation under visible light

A graphite carbon nitride(g-C_3N_4) modified Bi_4O_5I_2 composite was successfully prepared insitu via the thermal treatment of a g-C_3N_4/Bi OI precursor at 400°C for 3 hr.The as-prepared g-C_3N_4/Bi_4O_5I_2 showed high photocatalytic performance in Methyl Orange(MO) degradation under visible light.The best sample presented a degradation rate of 0.164 min~(-1),which is 3.2 and 82 times as high as that of Bi_4O_5I_2 and g-C_3N_4,respectively.The g-C_3N_4/Bi_4O_5I_2 was characterized by X-ray powder diffractometer(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Raman,X-ray photoelectron spectroscopy(XPS),ultraviolet-visible diffuse reflectance spectra(DRS),electrochemical impedance spectroscopy(EIS) and transient photocurrent response in order to explain the enhanced photoactivity.Results indicated that the decoration with a small amount of g-C_3N_4 influenced the specific surface area only slightly.Nevertheless,the capability for absorbing visible light was improved measurably,which was beneficial to the MO degradation.On top of that,a strong interaction between g-C_3N_4 and Bi_4O_5I_2 was detected.This interplay promoted the formation of a favorable heterojunction structure and thereby enhanced the charge separation.Thus,the g-C_3N_4/Bi_4O_5I_2 composite presented greater charge separation efficiency and much better photocatalytic performance than Bi_4O_5I_2.Additionally,g-C_3N_4/Bi_4O_5I_2 also presented high stability.·O_2~-and holes were verified to be the main reactive species.     

废渣──Al(OH)_3凝胶再利用研究

研究了对处理铝材加工含Al3＋的酸性废液过程中产生的二次污染物Al（OH）3凝胶废渣的应用。含水分约90％、80％左右的Al（OH）3凝胶200g分别与14～16mL、22～24mL95％的工业浓硫酸酸反应，可制得浓度为20％～23％的Al（SO4）3溶液，经稀释可用作造纸原料。     

电极流动分析仪的研制和应用

采用固定电极测试状态的方法，将流动技术引入到离子电极直接电位分析法中，设计并试制了电极流动分析仪。配用市售硝酸根电极、钠电极、氟电极、氯电极和氨电极进行了环境样品的测定。结果表明，电极流动分析仪法的分析速度比直接电位法提高２－３倍，变异系数，２．９％－５．０％之间，回收率在９０％－１０５％之间；直接电位法变异系数在２．３％－６．７％之间，加收率在９０％－１０９％之间。     

无缝钢管局部径向模具塑性成形过程的三维有限元数值模拟

采用大变形弹塑性有限元理论,用DYNA3D(研究版)有限元软件,对无缝钢管局部径向模具塑性成形过程中当凸模的凹槽尺寸与凸模的圆弧半径发生变化时进行了数值模拟研究,得出了对成形钢管表面质量控制具有重要参考价值的结论,解决了成形钢管表面的压痕问题。     

Effects of bifenthrin on Daphnia magna during chronic toxicity test and the recovery test

IntroductionWiththedevelopmentandapplicationofnewpesticide ,insecticidehasgreatlyreducedtheharmofpesttocrops .Bifenthrinisaneffectivepyrethroidinsecticideandacaricideagainstawiderangeofinsectpests ,anditisverypoisonoustomammal,aquatic .Thisinsecticideiswi…     

三维叠前时间偏移技术在江苏WZD地区的应用

当地下地质构造复杂、断裂发育,横向速度变化不是太剧烈的情况下,提高偏移成像精度,三维叠前时间偏移是一种行之有效的方法。三维叠前时间偏移取得成功的关键:一是高保真、高信噪比的叠前数据;二是建立一个合理的三维偏移速度场。随着计算机性能的不断提高,三维叠前时间偏移逐渐成为常规处理技术,该技术在江苏油田WZD地区得到了广泛的应用,实际资料处理结果及钻探效果证实了三维叠前时间偏移技术是解决WZD地区复杂构造成像精度的一种好方法。     

A study on Se application for improving the soil in the environment at lower Se level

A result that application of sodium selenite or fly ash to some of soilin loess plateau can increase Se content in wheat grain has been demonstrated by the pot and field experiments, and added Se in soil can last its availability for 3 years. So this is a good measure for improving the low Se soils and preventing the Kaschin-Beck disease.     

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

A novel La-Co-O-C (LC-C) composites were prepared via a facile co-hydrothermal route with oxides and glycerol and further optimized for methane catalytic activity and thermal stability via component regulation. It was demonstrated that Co₃O₄ phase was the main component in regulation. The combined results of X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of oxygen (O₂-TPD), temperature-programmed reduction of hydrogen (H₂-TPR), temperature-programmed desorption of ammonia/carbon dioxide (NH₃/CO₂-TPD) revealed that component regulation led to more oxygen vacancies and exposure of surface Co²⁺, lower surface basicity and optimized acidity, which were beneficial for adsorption of active oxygen species and activation of methane molecules, resulting in the excellent catalytic oxidation performance. Especially, the (3.5)LC-C (3.5 is Co-to-La molar ratio) showed the optimum activity and the T₅₀ and T₉₀ (the temperature at which the CH₄ conversion rate was 50% and 90%, respectively) were 318 and 367°C, respectively. Using theoretical calculations and in situ diffuse reflection infrared Fourier transform spectroscopy characterization, it was also found that the catalytic mechanism changes from the “Rideal-Eley” mechanism to the “Two-term” mechanism depending on the temperature windows in which the reaction takes place. Besides, the use of the “Flynn-Wall-Ozawa” model in thermoanalytical kinetics revealed that component regulation simultaneously optimized the decomposition activation energy, further expanding the application scope of carbon-containing composites.