地面爆燃式电打火装置在火炬上的应用

介绍了地面爆燃式电打火装置的结构及安装要点,实践表明该装置点火效率高、故障率低、便于检修,非常适合石油化工行业的火炬打火系统。     

井喷点火后对周边井和集气站的影响研究

以实际工程项目为例,利用计算流体动力学软件（CFD）,以3种不同压力、外界风速和2种出口直径为边界条件,分别对井喷情况下的流场分布进行了18组数值模拟计算,并对模拟结果及其对周边设施的影响进行了分析。数值模拟结果表明,在压力为10MPa,出口直径为62mm,风速为1m／s时,井喷后气流的出口速度超过400m／s,而火焰表面温度超过1500K,喷射火对周边建筑物的伤害范围超过65m,对周边的设备与建筑造成毁坏;超过104m才不会有明显伤害。     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

Minimum ignition energy of LDPE dust/ethylene hybrid mixture

An experimental device for evaluating the minimum ignition energy (MIE) of LDPE dust/ethylene hybrid mixture was built with the innovative mixing mode. The MIE of the hybrid mixture that contained ethylene below its lower explosive limit (LEL) was studied. The result indicated that adding a small amount of ethylene significantly reduced the MIE of the original dust cloud. All the MIEs with five different particle sizes were found to show similar trends of exponential attenuation with the increase of ethylene concentration; such attenuating effect grew as the dust particle size rose. When ethylene concentration increased and approached to its LEL, the reaction mechanism dominated by combustible dust turned into one dominated by combustible gas. The MIE decreased first and then increased with the dust mass and increased with the dust particle size. A multifactor mathematical correlation model of the MIE with the dust particle size and ethylene concentration was developed.     

三环唑粉尘爆炸特性研究

利用激光粒度仪对三环唑粉尘的粒径分布进行分析,并用20 L爆炸球测试装置、哈特曼管装置探讨了粉尘质量浓度、点火延迟时间、点火能量、粒径分布对粉尘爆炸的影响并总结了相关规律。实验结果表明:粉尘粒度是影响粉尘最小点火能和爆炸下限的单调因素,粉尘质量浓度是影响粉尘爆炸压力的极值因素,点火延迟时间是影响粉尘最小点火能的极值因素。     

Minimum ignition energy of medicinal powder – Florfenicol and Tilmicosin

This work aims to help improve the electrostatic safety design and explosion prevention of medical facilities. In this study, the minimum ignition energies (MIEs) of Florfenicol, Tilmicosin and mixtures of Florfenicol and Tilmicosin at ratios of 1:1, 1:2, 2:1 and 1:4 were measured in a Hartmann apparatus. The results demonstrated that the MIEs for Florfenicol, Tilmicosin and mixtures of Florfenicol and Tilmicosin at ratios of 1:1, 1:2, 2:1 and 1:4 are 200, 70, 180, 150, 200 and 110 mJ, respectively. Tilmicosin is more sensitive to static electricity, which is more dangerous than the other two powders examined in this paper. Furthermore, the MIEs of the mixtures are proportional to the Florfenicol content. For all powders, the MIE first decreased with the powder mass and later reached its minimum value. In addition, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) were used to investigate the morphological specificity and thermal decomposition of the powders to elucidate the parameters governing the powder explosions further.     

Minimum ignition energies of pure magnesium powders due to electrostatic discharges and nitrogen's effect

This paper experimentally investigated the relation between the minimum ignition energy (MIE) of magnesium powders as well as the effect of inert nitrogen (N₂) on the MIE. The modified Hartmann vertical-tube apparatus and four kinds of different-sized pure magnesium powders (median particle size, D50; 28.1 μm–89.8 μm) were used in this study. The MIE of the most sensitive magnesium powder was 4 mJ, which was affected by the powder particle size (D50; 28.1 μm). The MIE of magnesium powder increased with an increase in the N₂ concentration for the inerting technique. The magnesium dust explosion with an electrostatic discharge of 1000 mJ was suppressed completely at an N₂ concentration range of more than 98%. The experimental data presented in this paper will be useful for preventing magnesium dust explosions generated from electrostatic discharges.     

卤素类阻燃剂的阻燃基础理论

本文从阻燃化学反应,化学键能,热传递和反应动力学角度分析勖类阻燃剂的阻燃机理。     

加气站压缩机间气体爆炸数值模拟研究

加气站压缩机间安全设计时,需要评估内部气体爆炸危害,确定爆炸能量和影响因素。采用CFD技术,建立加气站压缩机间三维模型,模拟不同点火源位置、泄压板不同泄压压力和重量下,压缩机间气体爆炸时的爆炸压力及火焰传播行为。结果表明点火源位置以及泄压参数是影响加气站压缩机间气体爆炸的重要因素;点火源位置距离压缩机间放空位置越近,爆炸压力越小;对于泄压参数,爆炸压力与泄压板开启压力和重量之间均为正比关系。为减缓压缩机间内的气体爆炸危害,需要合理布置点火源位置,选择容重轻、泄压压力小的泄压材料,并同时需要考虑爆炸导致的物体破碎危害以及火焰次生灾害。     

石化装置泄漏事故点火源及点火概率的确定

简要综述石化企业常见点火源的分类及点火概率的确定方法。首先介绍点火源的常见分类方式,通过事件树展示泄漏发生后立即点火和延迟点火造成的不同事故后果;其次总结目前国内外确定点火概率的两种方法,即基于事故统计的点火概率以及基于点火源分类和统计的方法。在基于事故统计的点火概率中,给出国外在易燃液体运输、井喷、储罐破裂、管道运输等行业发生泄漏事故后的点火概率。在基于点火源分类及统计的点火概率计算中,给出TNO、HSE推荐的点火概率计算方法。同时对国内的研究情况进行了总结,给出已发表的点火概率计算方法。最后简要介绍目前国内关于点火过程的试验研究。针对国内工厂实际情况确定不同点火源的点火概率的工作亟待开展。