滞洪型平原水库蓄水对水环境影响分析及其协同调控研究

本文通过滞洪型水库运行机理的介绍,以石佛寺水库为例,提出利用地表水和地下水协同调控解决蓄水带来的环境负效应,通过建立库区水环境统一模型,利用数值模拟方法分析预测水库蓄水对环境的影响,并对解决水库蓄水产生的环境负效应进行方案的优化选择,最终提出地表水库蓄水和地下水库供水的最优方案.     

天然水体中有机物检测方法的选择与优化

本文选取并优化了一种准确、易行、适合于天然水样中微量有机物的分析技术.天然水样品中有机物通过混合大孔径吸附树脂XAD-2与XAD-7(4:1,V/V)富集并用二氯甲烷洗脱.所有富集的有机物样品中均加入衍生化试剂N,O-双(三甲基硅基)三氟乙酰胺(缩写为BSTFA)硅烷化,最后采用气相色谱-质谱联用仪分析.为了实验的简便,我们的样品为模拟水样(4L添加定量5β-胆烷(挪威Chiron公司)的去离子水).     

石英砂滤料表面润湿改性

采用硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂对石英砂进行表面改性,以制备亲油疏水性滤料。研究得出,钛酸酯偶联剂改性石英砂的最佳工艺条件为:偶联剂用量15%,反应温度90℃,搅拌时间15 min;硅烷偶联剂和铝酸酯偶联剂改性石英砂的最佳工艺条件均为:偶联剂用量15%,反应温度110℃,搅拌时间15 min。水对钛酸酯偶联剂改性石英砂滤料的润湿重量由改性前的1.5589 g降低到0.0282 g,水对硅烷偶联剂改性石英砂滤料的润湿重量降低到0.0607 g,水对铝酸酯改性石英砂滤料的润湿重量降低到0.2664 g。静态吸附实验表明,硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂改性石英砂滤料对油的吸附容量分别增加了33.67%、42.87%和22.30%。XPS和FT-IR分析表明,偶联剂均以化学键的方式包覆在石英砂滤料表面,结合稳定。     

石墨气体扩散电极的制备与性能优化

电极的制备工艺及参数直接影响电极材料的活性。主要考察了C/PTFE质量比、碾压压力、煅烧温度、造孔剂NH4HCO3及稀土掺杂等因素对电极产出H2O2的影响规律。研究结果表明,电极最佳制备条件为:石墨和PTFE质量比为2∶1、石墨、造孔剂和稀土元素质量比为6∶1∶1、碾压压力10 MPa、煅烧温度330℃。在pH=3、电解质Na2SO4浓度为0.05mol/L条件下,电解2 h后,改性电极产生的H2O2从95 mg/L提高到350 mg/L,提高了268.4%。     

活性污泥缺氧转化1-2-7-三氨基-8-羟基-3-6-萘二磺酸

1—2-7-三氨基-8-羟基-3—6-萘二磺酸（TAHNDS）作为偶氮染料的脱色产物很难被常规的厌氧-好氧染料废水处理工艺所去除。研究了未经驯化的活性污泥对TAHNDS的缺氧转化效果。结果表明,只有在特定的缺氧条件下（ORP在-50～-150mV之间）,TAHNDS才能被活性污泥所降解转化。当浓度在10—80mg／L范围内,TAHNDS可在72h内转化93％以上。加入100mg／L的硝酸盐和0．64mmol／L的氧化还原介体蒽醌-2-磺酸钠（AQS）可将40mg／L的TAHNDS的转化时间从84h缩短到36h。光谱及HPLC—MS分析表明,TAHNDS在缺氧条件下主要是通过脱氨基和脱磺酸作用生成已知可好氧生物降解的3,5-二氨基4-羟基萘-2-磺酸。因此,缺氧处理有望作为预处理工艺促进废水中TAHNDS的完全降解。     

汽油清净剂的研究应用及进展

随着环保要求的日趋严格及汽车工业的发展创新，开展汽油清净剂的研究和应用工作已势在必行。本文介绍了国内外汽油清净剂的发展过程、应用现状，同时还介绍了将清净分散剂、抗氧防腐剂、减磨剂、防锈剂等添加剂复合而成的汽油清净剂的研制情况。实验结果表明：该剂具有抑制和清除发动机燃燃油系统沉积物的性能，达到国外第三代同类产品的水平。     

水面溢油集油剂研究--天然混合羧酸系列集油剂

利用天然混合羧酸与聚氧丙烯醚以适当比例混合，以乙醇为溶剂制得新型集油剂，燃点８８．７℃，对于柴油、原油膜有优良的集油性能。ＱＳ＝１集油剂在５５ｃｍ长的水槽中，使水面柴油膜收缩距离达４４．０～５０．８ｃｍ，维持时间大于６ｈ；ＱＳ－２集油剂使原油膜面积收缩率７４．３％～７６．５％，维持时间大于１６ｈ。该集油剂在０～４０００ｍｇ／ｄｍ＾３浓度下，不影响小球藻和小新月菱形藻生长。该集油剂在４级海况条件下仍     

城市环境系统的权重分配

本文将多目标二级决策法用于城市环境系统的权重分配，对城中环境系统各要素及各要素的表征参数进行客观自动赋权，克服了环境质量评价中权重分配的主观随意性。该方法物理意义清晰，算法简便，具有较好的应用价值。     

Gas/particle partitioning of atmospheric PCDD/Fs in a satellite town in Eastern China

Gas/particle partitioning of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in ambient air was investigated in a satellite town in Eastern China from April 2007 to January 2008 comprehending large temperature variations (from 3 to 34 °C, daily average). Molecular weight, molecular structure and ambient temperatures are the three major factors that govern the gas/particle partitioning of atmospheric PCDD/Fs throughout the year. Generally, good agreements were obtained (except for winter) between measured particulate fractions and theoretical estimates of both the Junge–Pankow adsorption model and Harner Bidleman absorption model using different sets of subcooled liquid vapor pressure and octanol–air partition coefficient (K_oa), respectively. Models utilizing estimates, derived from gas chromatographic retention indices (GC-RIs), are more accurate than that of entropy-based. Moreover, during winter, the K_oa-based model using the GC-RIs approach performs better on lower chlorinated PCDD/Fs than that of -based. Furthermore, possible sources of mismatch between measured and predicted values in winter (3–7 °C) were discussed. Gas adsorption artifact was demonstrated to be of minor importance for the phenomena observed. On the other hand, large deviations of slopes (m_r) and intercepts (b_r) in logK_p vs. plots from theoretical values are observed in the literature data and these are found to be linearly correlated with ambient temperatures (P<0.001) in this study. This indicates that the non-equilibrium partitioning of PCDD/Fs in winter may be significantly influenced by the colder temperatures that may have slowed down the exchange between gaseous and particulate fractions.     

Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents

Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modified CDs (i.e. hydroxypropyl-β-cyclodextrin and methyl-β-cyclodextrin). A linear correlation between the logarithm of the equilibrium constant for the CV/CD inclusion complexes formation (K_cpx) and the maximum amount of CV extracted from sand in the columns experiments at a flow rate of 1.5 ml min⁻¹ was drawn. This relationship predicts that CDs with K_cpx < 180 M⁻¹ are not suitable for CV removal from sand. CDs failed to displace CV from RD because they generate the formation of RD clusters where CV remains entrapped.