Experimental study of recycling lightweight concrete with aggregates containing expanded glass

The focus is on the issue of waste management when constructing and recycling lightweight concrete (LWC) with aggregates containing expanded glass. The paper analyses the recycling of concrete from lightweight aggregates, and on the important issue of environmental and waste management. The characteristics of recycling LWC such as density, compressive strength and thermal conductivity are investigated, and compared with normal existing concrete from lightweight aggregates. The results indicate that it is possible to recycle lightweight concrete construction waste. The described method shows great possibilities for increasing the use of construction waste materials from LWC containing expanded glass, in order to benefit from better use of the available capacity from existing construction waste. The characteristics of density, compressive strength and thermal conductivity from the new recycled material were compared with normal existing concrete from lightweight aggregates, such as changes in dependency on the type and parts of waste as well as its new binding components. Thus, a new recycled material has been created with new characteristics of density, compressive strength and thermal conductivity, which is conform to the compressive strength class and rules on heat protection and energy efficiency use in buildings (SI OJ RS No. 42/2002). Laboratory density, compressive strength, and thermal conductivity tests results showed that LWC can be produced by the use of waste LWC with aggregates containing expanded glass. However, the use of waste LWC with aggregates containing expanded glass seems to be necessary for the production of cheaper and environmentally friendly LWC.     

废钢铁切割加工烟尘的治理

介绍了氧-乙炔火焰切割加工废钢铁产生的烟尘治理系统的设计和系统设备选型,重点介绍了烟尘捕集罩的设计和除尘器、电磁脉冲阀、风机的选型和PLC自动控制以及系统实际运行效果,为废钢铁加工企业治理污染提供一套简单、经济、实用的除尘系统作参考.     

钢铁企业工作场所煤气泄漏扩散规律的研究

以钢铁企业管网煤气泄漏为研究对象,以煤气泄漏扩散规律为研究主题,在确定煤气泄漏相似于浮力射流的基础上,建立煤气泄漏扩散的数学模型。采用CFD软件PHOENICS数值模拟气体泄漏过程的速度场及其浓度分布。在已有煤气泄漏检测系统的基础上,选择性实验模拟煤气泄漏浓度与扩散时间、扩散方向的变化。数值模拟和实验模拟表明,虽然两种方法所得结果存在一定差异,从定性分析角度而言,却能够反映工作场所煤气泄漏后在有限空间内运移扩散的一般规律。     

中国21世纪城市供水新概念--分质供水

结合我国城市一直使用的统一给水方式已与当前水资源紧缺,用水多样化,人们饮用水质质化的状况极不适应的情况,提出对传统的给水方式进行改革的最适宜方式是分质供水。     

河北省钢铁工业主要大气污染物减排潜力分析

通过对河北省钢铁工业存在问题的分析,得出我省钢铁行业主要大气污染物为二氧化硫和粉尘.结合我省钢铁企业的实际情况,从工程技术、政策管理等方面提出相应治理措施,并对"十一五"期间我省钢铁行业二氧化硫和粉尘减排效益进行预测.预测结果显示:采用所建议的减排措施后,我省钢铁工业二氧化硫减排量对全省"十一五"减排计划的贡献率为81.4%;粉尘可减排60%.     

生物资源在减轻农业草害中的作用与技术对策

论述了生物资源在减轻农业草害和促进农业可持续发展中所具有的生态效益和经济效益,提出了开发生物资源防治农业草害的技术对策。     

气相色谱法测定环境空气中2-甲基吡啶的方法

研究建立了活性炭管吸附,甲醇解吸,气相色谱法测定环境空气中2-甲基吡啶的方法。该法的检出限为1.8×10~(-3)mg/m~3,线性相关系数r为0.999 6,精密度RSD为1.3%~2.9%,回收率为82%~84%。该方法简单,干扰较少,结果准确、可靠,重现性好,适用于环境空气中2-甲基吡啶的测定。     

江苏省不锈钢产业集聚区土壤重金属污染评价与分析

随着不锈钢产业的发展,其生产加工过程中产生的含重金属的废水、废气及固体废弃物对周围土壤及地表水环境的影响也日益显现。选择江苏省不锈钢产业集聚区内溱东镇土壤为研究对象,对区域内63个采样点进行分析,发现区域内土壤中Cr、Zn、Cd、Pb质量分数平均值均未超过国家土壤环境质量标准的二级标准要求,重金属污染程度由大到小的顺序为:CdNiCrMnZnPb,并且通过SPSS13.0统计软件对分析数据进行相关性分析,数据表明,土壤中重金属Cr、Fe、Cd、Ni、Mn来自不锈钢产业的可能性较大。     

南海高温高压含CO2气井管柱腐蚀适用性评价

目的 明确南海高温高压含CO2气井管柱材料腐蚀适用性,指导现场管柱材料选择.方法 采用高温高压釜腐蚀实验仪器对井筒高温高压环境条件下不同材料腐蚀速率进行实验分析,并采用扫描电镜及能谱分析仪对腐蚀实验后试样腐蚀形貌进行分析,评价不同井筒环境下管柱材料腐蚀适用性.结果 150℃条件下,材料腐蚀速率随分压的增加而增大,同时随...     

What matters for work engagement? A diary study on resources and the benefits of selective optimization with compensation for state work engagement

This diary study addresses the benefits of employees' daily use of selective optimization with compensation (SOC) for state work engagement. We hypothesized that day‐level SOC not only directly fosters work engagement but that SOC also reveals its beneficial effects for work engagement in interaction with both external and internal resources. Specifically, we proposed SOC substitutes for job control, role clarity, and state of being recovered, thus helping employees manage low daily levels of these resources. We tested our hypotheses with a sample of 138 employees who completed two daily surveys over a total of 545 workdays. Results of multilevel analyses revealed that SOC benefits work engagement in both proposed ways. First, day‐level SOC was positively related to state work engagement. Additionally, day‐level role clarity and state of being recovered predicted state work engagement, but day‐level job control did not. Second, SOC benefitted state work engagement by offsetting low levels of role clarity and being recovered, and by boosting job control in their respective relationships with work engagement. The results suggest that by using SOC at work, employees can actively enhance their own work engagement on a given workday. This knowledge provides promising starting points for the development of interventions.