Multi-response optimization of Fenton process for applicability assessment in landfill leachate treatment

Fenton process, as a pretreatment method, was found to be effective in the primary treatment of mature/medium landfill leachate. However, the main problem of the process is the large amount of produced sludge that requires an accurate feasibility evaluation for operational applications. In this study, the response surface methodology was applied for the modeling and optimization of Fenton process in three target responses, (1) overall COD removal, (2) sludge to iron ratio (SIR) and (3) organics removal to sludge ratio (ORSR), where the latter two were new self-defined responses for prediction of sludge generation and applicability assessment of the process, respectively. The effective variables included the initial pH, [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage. According to the statistical analysis, all the proposed models were adequate (with adjusted R² of 0.9116–0.9512) and had considerable predictive capability (with prediction R² up to 0.9092 and appropriate adequate precision). It was found that all the variables had significant effects on the responses, specifically by their observed role in dominant oxidation mechanism. The optimum operational conditions obtained by overlay plot, were found to be initial pH of 5.7, [H₂O₂]/[Fe²⁺] ratio of 17.72 and [Fe²⁺] of 195 mM, which led to 69% COD removal, 2.4 (l sludge/consumed mole Fe²⁺) of SIR and 16.5 (gCOD removed/l produced sludge) for ORSR in verification test, in accordance with models-predicted values. Finally, it was observed that [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage had significant influence on COD removal, while Fe²⁺ dosage and [H₂O₂]/[Fe²⁺] ratio had remarkable effects on SIR and ORSR responses, respectively.     

An assessment methodology for successional systems. I. Null models and the regulatory framework

Standard procedures for evaluating environmental impact involve comparison between before and after conditions or scenarios or between treatment and control site pairs. In many cases, however, endogenous directional change (natural succession) is expected to occur at a significant rate over the period of concern, particularly for manmade systems such as impoundments. Static evaluations do not provide an adequate approach to such problems. A new evaluation frame is proposed. Nominal system behavior over time is characterized by a stochastic envelope around a nominal trajectory. We show that both the state variance and the sampling variance can change over time. In this context, environmental regulations can be framed as constraints, targets, or conformance to ideal trajectories. Statistical tests for determining noncompliance are explored relative to process variance, sample error, and sample size. Criteria are elucidated for choosing properties to monitor, sample size, and sampling interval.     

几种事故预测方法的探讨

本文根据生产单位事故发生的随机性特点,论证了未来时段中事故次数及其时间分布等各项指标,是能够用多种随机数学模型和灰色系统理论来预测的。用非随机的函数模型预測事故是不合适的。给出了几种事故预測方法,并提出了几种值得研究和试用的方法。     

Using the ECLPSS software environment to build a spatially explicit component-based model of ozone effects on forest ecosystems

We have developed a modeling framework to support grid-based simulation of ecosystems at multiple spatial scales, the Ecological Component Library for Parallel Spatial Simulation (ECLPSS). ECLPSS helps ecologists to build robust spatially explicit simulations of ecological processes by providing a growing library of reusable interchangeable components and automating many modeling tasks. To build a model, a user selects components from the library, and then writes new components as needed. Some of these components represent specific ecological processes, such as how environmental factors influence the growth of individual trees. Other components provide simulation support such as reading and writing files in various formats to allow inter-operability with other software. The framework manages components and variables, the order of operations, and spatial interactions. The framework provides only simulation support; it does not include ecological functions or assumptions. This separation allows biologists to build models without becoming computer scientists, while computer scientists can improve the framework without becoming ecologists. The framework is designed to operate on multiple platforms and be used across networks via a World Wide Web-based user interface. ECLPSS is designed for use with both single processor computers for small models, and multiple processors in order to simulate large regions with complex interactions among many individuals or ecological compartments. To test Version 1.0 of ECLPSS, we created a model to evaluate the effect of tropospheric ozone on forest ecosystem dynamics. This model is a reduced-form version of two existing models: , which represents an individual tree, and , which represents forest stand growth and succession. This model demonstrates key features of ECLPSS, such as the ability to examine the effects of cell size and model structure on model predictions.     

ESTIMATED STREAM FLOW REQUIREMENTS FOR FISHES OF THE WASHITA RIVER BELOW FOSS RESERVOIR,WESTERN OKLAHOMA1

Velocity and depth preference curves for juvenile and adult red shiners (Notropis lutrensis) were developed for each season of the year. The incremental methodology, developed by the U.S. Fish and Wildlife Service for quantifying the amount of physical habitat available for fish, was applied as a basis for recommending minimum stream flows for life stages of red shiners and channel catfish (Ictalurus punctatus) in the Washita River below Foss Reservoir. The minimum stream flow required to support populations of red shiners and channel catfish was estimated to be 0.60 m³/s during all months except April and May, during which flushing flows of 3.0 m³/s were recommended. Under drought conditions a contingency flow of 0.18 m³/s was recommended for August through March, a flushing flow of 2.4 m³/s for April and May, and a flow of 0.30 m³/s for channel catfish spawning in June and July. Standing crop of adult red shiners per weighted usable area averaged 2.73 g/m² (27 kg/ha) for two sites on the Washita River. A positive relation between standing crop and weighted usable area was suggested. Use of the incremental methodology on the study reach below Foss Reservoir required 96 person-hours of labor, excluding training, travel, and developing preference curves, and a total cost of $1,762, of which $1,200 was for the purchase of equipment.     

响应面法优化养殖水体中炔雌醇的固相萃取条件

在单因素试验、Plackett-Burman设计试验基础上,采用Box-Behnken响应面法对养殖水体中炔雌醇(EE2)的固相萃取条件进行优化。结果表明,洗脱液体积、洗脱液组成和淋洗液体积是影响EE2固相萃取回收率的3个主要因素;EE2的最佳固相萃取条件为:水样pH值为3,进样流量为3.0 mL/min,淋洗液为体积分数为10%的甲醇水溶液,淋洗液体积7.0 mL,洗脱液为乙酸乙酯-正己烷混合溶液(体积比为9∶1),洗脱液体积12.0 mL。该条件下养殖水样中EE2固相萃取回收率为81.6%～86.7%。     

微波诱导热解法制备落叶吸附剂及其工艺优化

采用微波诱导热解法制备低成本落叶吸附剂,以实现落叶的资源化利用.以碘吸附值为响应值,采用响应面分析法研究了微波诱导热解法制备落叶吸附剂的工艺条件.结果表明,热解时间与微波功率之间存在交互作用,当热解功率增加时,可适当缩短热解时间.落叶吸附剂的最佳制备工艺条件为:热解时间4.04 min,微波功率488.72W,氯化锌质量分数27％.落叶吸附剂以微孔吸附为主,BJH孔径分布较窄,孔容最高峰对应的孔径在1.9 nm左右,Langmuir比表面积为769.61 m2/g.     

Research on transesterification parameters for producing plant sterols with supercritical methanol

The supercritical fluid method, regarded as a type of individual production process in the course of preparing plant sterols, has become a promising technology, which possesses advantages of high conversion rate without any pretreatment and need of a catalyst. This study examined the reaction process of the deodorizer distillate (DOD), which mainly included the direct transesterification of DOD to convert into free sterols. The effects of the ratio of methanol to DOD, reaction temperature and time on transesterification were studied. Furthermore, the interactions between different factors were also assessed using the response surface methodology. The optimal conditions obtained were as follows: reaction temperature 553 K, reaction time 80 min, and CH₃OH: DOD = 25:1 (mass ratio). Under these conditions, 36.42% sterol concentration was obtained, which is significantly higher in comparison with the initial sterols’ concentration in raw material (22.45%).     

Assessment of lead pollution in topsoils of a southern Italy area: Analysis of urban and peri-urban environment

Exposure to lead (Pb) may affect adversely human health. Mapping soil Pb contents is essential to obtain a quantitative estimate of potential risk of Pb contamination. The main aim of this paper was to determine the soil Pb concentrations in the urban and peri-urban area of Cosenza–Rende to map their spatial distribution and assess the probability that soil Pb concentration exceeds a critical threshold that might cause concern for human health. Samples were collected at 149 locations from residual and non-residual topsoil in gardens, parks, flower-beds, and agricultural fields. Fine earth fraction of soil samples was analyzed by X-ray Fluorescence spectrometry. Stochastic images generated by the sequential Gaussian simulation were jointly combined to calculate the probability of exceeding the critical threshold that could be used to delineate the potentially risky areas. Results showed areas in which Pb concentration values were higher to the Italian regulatory values. These polluted areas were quite large and likely, they could create a significant health risk for human beings and vegetation in the near future. The results demonstrated that the proposed approach can be used to study soil contamination to produce geochemical maps, and identify hot-spot areas for soil Pb concentration.