底质农残测定中固相柱净化体系的选择

使用固相柱对底质中的7种农残进行净化。结果表明,在相同淋洗条件下,使用氟罗里硅土柱比硅胶柱净化效果好。比较了不同溶剂体系、不同溶剂配比下2种萃取柱的净化效果,选择乙醚-正己烷(体积比1∶2)或丙酮-正己烷(体积比1∶4)作为净化溶剂,较小的收集体积都可满足所有目标化合物的回收率要求;相比较而言,丙酮-正己烷(体积比1∶4)作为净化溶剂,洗脱液的杂质干扰更小,净化效果更好。使用氟罗里硅土柱和丙酮-正己烷(体积比1∶4)对样品净化,方法简单,快速,净化效果好,适合大批量底质样品的前处理净化过程。     

天津城市污水泵站恶臭气体组分浓度及污染现状

为了解天津城市污水泵站恶臭的污染程度,选取天津市一个典型的城市污水泵站进行为期3天的采样,采集该污水泵站距离污染源强不同距离处的恶臭气体样品,用气相色谱-质谱联用仪（GS-MS）和分光光度法对采集样品的组分含量进行检测,比较了恶臭排放源点和不同距离处的恶臭组分的浓度特征和污染现状。结果表明,该泵站恶臭污染物质以硫化氢、二氯甲烷和苯系物为主,还有一些烯烃和芳香烃衍生物;恶臭物质的浓度变化范围是n.d.~0.073 7 mg/m³,大部分恶臭物质浓度一般由高至低表现为源点>下风向5 m,源点>背景值,环境空气采样点与恶臭排放源相比,其降幅明显;虽然检测到的恶臭组分较多,但是其浓度与《恶臭污染物排放标准》（GB 14554—1993）等标准中规定的排放限值相比,均未超标。     

环境监测用5种氯代烯烃混合气体标准样品研制

介绍了1μmol/mol氮气中5种氯代烯气体标准样品的研制方法。这5种氯代烯包括氯乙烯、1,1-二氯乙烯、顺1,2-二氯乙烯、三氯乙烯、四氯乙烯,其中氯乙烯常温下为气态,其他4种为液态,并且沸点低,将这几种氯代烯制备成气体标准样品存在制备精度低、气液转换不完全等困难。经研究,采用2步称量法制备5种氯代烯气体标准样品,重复制备的相对标准偏差小于1.6%。建立了5种氯代烯标准气体瓶内均匀性的实验方法,并通过考察样品量值伴随样品压力的变化来评价样品的均匀性。结果显示,5种氯代烯标准气体是均匀的,最低使用压力为1 MPa。依照ISO 15000.3来考察样品的时间稳定性,样品有效期为12个月。相对扩展不确定度为3%(置信度为95%)。     

成都PM2.5与气象条件的关系及城市空间形态的影响

2013年2月1日至3月20日、2013年7月10日至8月10日对成都市大气中细颗粒物(PM2.5)进行连续监测,同步记录气象数据。将PM2.5质量浓度与城市气象条件进行相关性分析,研究气象条件对PM2.5质量浓度的影响。2月1日至3月20日PM2.5质量浓度平均为147.38μg/m3,7月10日至8月10日平均为50.19μg/m3,大气细颗粒物污染最严重的时间出现在2月1—6日。成都市各气象条件中,PM2.5质量浓度与能见度、风速呈现显著负相关,而与其他气象要素相关性较弱,降水对PM2.5质量浓度影响也很大。改善城市通风有利于成都市大气中PM2.5的稀释和消散。通过建立3D模型并运用计算流体力学(CFD)软件模拟成都市选定的一处密集的建成区域,分析城市空间形态对通风的影响。研究发现,在假设等温的情况下,多层密集的区域对城市通风影响小,而高层对城市通风影响很大,建筑高度相近的街道与风向平行的风速大于与风向成角度的,与风向平行的街道沿线为高层的风速高于沿线为多层的,较大的开敞空间及背景风速更有利于城市通风环境。     

趋势分析法评价苯系物标准气体的时间稳定性

根据GB/T 15000.3—2008设计了苯系物标准气体的时间稳定性研究方案,制备了4瓶苯系物标准气体,随着时间的推移进行测定并将结果制图,结果显示量值随时间没有显著的变化趋势。以线性关系为模型,计算线性直线的斜率和斜率的标准偏差,用t检验判断斜率是否显著来评价标准气体的稳定性。计算结果显示,所有斜率均不显著,因此该研究制备的苯系物标准气体能够稳定保存22个月。根据时间稳定性数据计算由不稳定性引起的不确定度,并讨论了这种计算不稳定性引起不确定度的方法对结果有放大的可能性。     

含氟废气对农业环境的影响

叙述了某厂氢氟酸生产过程排出的含氟废气对厂区周围水稻和蔬菜的污染及其与气象条件的关系，并提出了防止农业环境氟污染的措施。     

Why social values cannot be changed for the sake of conservation

The hope for creating widespread change in social values has endured among conservation professionals since early calls by Aldo Leopold for a “land ethic.” However, there has been little serious attention in conservation to the fields of investigation that address values, how they are formed, and how they change. We introduce a social–ecological systems conceptual approach in which values are seen not only as motivational goals people hold but also as ideas that are deeply embedded in society's material culture, collective behaviors, traditions, and institutions. Values define and bind groups, organizations, and societies; serve an adaptive role; and are typically stable across generations. When abrupt value changes occur, they are in response to substantial alterations in the social–ecological context. Such changes build on prior value structures and do not result in complete replacement. Given this understanding of values, we conclude that deliberate efforts to orchestrate value shifts for conservation are unlikely to be effective. Instead, there is an urgent need for research on values with a multilevel and dynamic view that can inform innovative conservation strategies for working within existing value structures. New directions facilitated by a systems approach will enhance understanding of the role values play in shaping conservation challenges and improve management of the human component of conservation.     

Detention Outlet Retrofit Improves the Functionality of Existing Detention Basins by Reducing Erosive Flows in Receiving Channels

By discharging excess stormwater at rates that more frequently exceed the critical flow for stream erosion, conventional detention basins often contribute to increased channel instability in urban and suburban systems that can be detrimental to aquatic habitat and water quality, as well as adjacent property and infrastructure. However, these ubiquitous assets, valued at approximately $600,000 per km² in a representative suburban watershed, are ideal candidates to aid in reversing such cycles of channel degradation because improving their functionality would not necessarily require property acquisition or heavy construction. The objective of this research was to develop a simple, cost‐effective device that could be installed in detention basin outlets to reduce the erosive power of the relatively frequent storm events (~ < two‐year recurrence) and provide a passive bypass to maintain flood control performance during infrequent storms (such as the 100‐year recurrence). Results from a pilot installation show that the Detain H₂O device reduced the cumulative sediment transport capacity of the preretrofit condition by greater than 40%, and contributed to reduced flashiness and prolonged baseflows in receiving streams. When scaling the strategy across a watershed, these results suggest that potential gains in water quality and stream channel stability could be achieved at costs that are orders of magnitude less than comparable benefits from newly constructed stormwater control measures.     

Novel mesoporous microspheres of Al and Ni doped LMO spinels and their performance as cathodes in secondary lithium ion batteries

A facile, scalable, and solution-based technique is used to fabricate Al and Ni-doped (LiAl_0.1Mn_1.9O₄ and LiAl_0.1Ni_0.1Mn_1.8O₄) microspheres of lithium manganese oxide (LMO) spinels for use as reversible cathode materials for lithium ion batteries (LIBs). The spheres of the two samples exhibit different porosities. Cells with these LMO-based cathodes are then cycled between 4.5 V and 2 V to study their stabilities while simultaneously being subjected to the undesirable Jahn-Teller distortion that occurs around the ~3 V regime. The LiAl_0.1Mn_1.9O₄ (LAMO) and the LiAl_0.1Ni_0.1Mn_1.8O₄ (LANMO) cells exhibit comparable open circuit voltages (OCV) of 2.94 V and 2.97 V, respectively. During cell cycling, the LAMO cell exhibits a maximum specific capacity of 122.51 mAh g^?1 with a capacity fade of 65.35% after 75 cycles. The LiAl_0.1Ni_0.1Mn_1.8O₄ (LAMO) sample fares better and exhibits a maximum of 140.49 mAh g^?1 and a capacity drop of 52.59%. Detailed structural studies indicate that Ni doping and the greater degree of porosity of the LANMO sample to be a stabilizing factor. This is further confirmed by cyclic voltammetry (CV) and AC impedance spectra analysis.     

中和共沉淀—铁氧体法处理含镍、铬废水的实验研究

利用中和共沉淀—铁氧体法处理甘肃某稀有金属生产企业产生的含镍、铬废水,同时对该废水的处理工艺条件进行了实验研究。经测定,废水中Ni 2+质量浓度为50mg/L,Cr(Ⅲ)质量浓度为87mg/L。通过实验得到处理工艺的最佳条件:投料摩尔比(Fe2+/(Ni 2++Cr2O2-7))为9,pH=9,温度为70℃。出水中镍、铬均可达到《污水综合排放标准》(GB 8978—1996)中第一类污染物最高允许排放浓度的要求,为中和共沉淀—铁氧体法处理混合重金属废水的工艺条件研究提供了参考。