Emissions of gaseous and particulate pollutants in a port and harbour region in India

Ports can generate large quantity of pollutants in the atmosphere due to various activities like loading and unloading,transportation, and construction operations. Determination of the character and quantity of emissions from individual sources is an essential step in any project to control and minimize the emissions.In this study a detailed emission inventory of total suspendedparticulate matter (TSP), particulate matter less than 10 m(PM₁₀), sulfur dioxide (SO₂) and nitrogen oxides (NO_x) for a port and harbour project near Mumbai is compiled. Results show that the total annual average contributions of TSP and PM₁₀ from all the port activitieswere 872 and 221 t yr^-1, respectively. Annual average emissions of gaseous pollutants SO₂ and NO_xwere 56 and 397 t yr^-1, respectively, calculatedby using emission factors for different port activities. The maximum TSP emission (419 t yr ^-1) was from paved roads, while the least (0.4 t yr^-1) was from bulk handling activity. The maximum PM₁₀ emission (123 t yr^-1) was from unpaved roads and minimum (0.2 t yr^-1) from bulk handling operations. Similarly the ratio of TSP and PM₁₀ emission was highest (5.18) from paved roads and least (2.17) from bulk handling operations. Regression relation was derivedfrom existing emission data of TSP and PM₁₀ from variousport activities. Good correlation was observed between TSP andPM₁₀ having regression coefficient >0.8.     

An Assessment on Variation of Sulphur Dioxide and Particulate Matter in Erzurum (Turkey)

Sulphur dioxide and PM₁₀ levels are investigated in Erzurum during the periods of 1990–2000 heating season to assess air pollution level. For that reason, emissions of sulphur dioxide and particulate matter were calculated by using consumption of fuels and Turkish emission factors. These emission values were evaluated together with air pollution levels, which were measured at six stations in Erzurum atmosphere during 1990–2000 winter periods. Results reveal that in 1990–1994 heating period, there is an increasing trend in the emissions and air pollution levels over Erzurum, and the air quality limits were not met. The daily 24 h limit (short-term limit) was exceeded 127 days in 1992–1993 winter period. The reason for this increase was found to be the switching to use of low-quality fossil fuels instead of cleaner ones. Results also indicated that there was a considerable decrease in emissions of air pollutants and air pollution levels after 1995. This can be explained by the consumption of more high-quality fossil fuels. The correlation coefficient of SO₂ with PM₁₀ is obtained as r² = 0.85, which is a high value supporting the idea that both pollutants are emitted from the same source.     

钴掺杂二氧化钛的制备及光催化性能的研究

钴掺杂制备超细TiO2粒子,并进行了表征。CoO与TiO2形成固溶体抑制了TiO2晶粒的长大并促进相变。钴掺杂有利于提高TiO2光催化剂的寿命。     

硫酸法钛白生产水洗工序清洁生产技术初探

通过开展水洗工段用水审计并试验了温度、偏钛酸ξ电位和漂白工艺对水洗的影响效果，从实践和理论上探讨了为其提高钛白质量改进水洗工艺的清洁生产方案的可行性和合理性。     

郯庐断裂系统与中国东部幔源岩浆成因CO_2关系的初探

中国已发现的幔源岩浆成因CO2气藏主要分布在与郯庐断裂发育密切相关的东部伸展盆地，两者关系具体表现如下：1．中国东部幔源岩浆成因CO2气藏的空间展布与郯庐断裂保持一致；2．郯庐断裂切割深度达到上地幔；3．沿郯庐断裂岩浆活动强烈，且具幔源特点；4．中国东部伸展盆地自中、新生代以来的演化受郯庐断裂带活动影响。本文主要以郯庐断裂带为主线，结合幔源岩浆成因CO2气藏典型实例，从郯庐断裂构造环境、空间格局和演化过程对幔源岩浆成因CO2的控制作用进行初步归纳和分析。     

Quantitative structure-property relationship of aromatic sulfur-containing carboxylates

IntroductionItiswidelyrecognizedthatthephysicochemicalprofileoforganicchemicalslargelydeterminestheirdistributionbetweenenvironmentalmedia .Fortheenvironmentalbehaviorsoforganiccontaminants,watersolubility(SW)andoctanol waterpartitioncoefficient(KOW)aretremendouslyimportant.Octanol waterpartitioncoefficienthasbeenwidelyrelatedtobiochemicaland orbiologicalactivityinquantitativestructure activityrelationships(QSARs) (Leo ,1 971 ) .Watersolubilitycorrespondstothedispersiontendencyandtothereca…     

Optimising the environmental benefits of emission reductions from UK coal- and oil-fired power stations: a critical loads approach

This paper describes a method for determining reductions of SO₂ emissions from coal- and oil-fired power stations, oil refineries and large industrial units in the UK taking into account their pollution potential. The method is based on the use of two gridded data sets: critical loads, which represent the sensitivity of the environment to acid deposition and modelled estimates of total (wet + dry) sulphur deposition for 646 point sources within the UK. An iterative method is used to identify and subsequently reduce emissions from point sources that contribute most to areas of critical loads exceedance. This paper demonstrates how the method may be used to determine an optimal allocation of emissions across the UK which yields the maximum amount of environmental protection per unit of emission.The paper then goes on to consider the changes that will have to take place within the UK power generation industry in order to meet the revised EC Large Combustion Plant Directive which comes into force on 1 January 2008. Particular emphasis is placed upon proposed emissions trading schemes and the environmental implications of allowing trading between stations with high and low pollution potentials. The paper concludes by suggesting that the emissions trading process should take into account the pollution potential of each source, irrespective of whether the proposed emission is within the plant's agreed emission limit. An approach based entirely on minimizing environmental damage rather than one which takes cost into account, as in current integrated assessment modelling, could provide an interesting approach across the rest of Europe.     

测空气中SO2时的主要影响因素

目前测定空气中SO2主要采用甲醛吸收-副玫瑰苯胺分光光度法。该法操作比较严格，测试结果的准确度受诸多因素的影响。因此文中对这些影响因素进行了探讨，主要为试剂质量、显色温度和显色时间、溶液加入顺序、比色皿、空气采样器流量、采样温度、导气管的吸附等因素对测定结果的影响进行了探讨。     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

应用被动扩散管监测分析葫芦岛市环境空气NO2时空分布特征

被动扩散技术以其低成本、操作简单、空间覆盖率较高等优点已在西方国家广泛应用于环境空气质量监测与调查,辽宁省环保局通过欧盟项目引进,本技术在葫芦岛市环境空气质量监测应用有4年时间.依据4年环境空气被动扩散管监测基础数据,分析了解葫芦岛市城区大气中NO2时空分布特征:高浓度值出现在交通区,季节上呈现春季明显低于其它季节.