ClO2消毒工艺对污水处理厂出水超级耐药基因的影响

为了研究二氧化氯（chlorine dioxide,ClO₂）消毒工艺对污水处理厂出水中超级耐药基因（super antibiotic resistance genes,SARGs）的去除效果,对污水处理厂出水消毒前后的水样进行了全年采集,并采用微孔滤膜正压过滤法及核酸吸附柱-洗脱法分别富集水中细菌和胞外核酸后,利用荧光定量PCR技术对其中的9种SARGs进行定量检测.结果表明,无论是胞内还是胞外核酸,均有NDM-1、MCR-1 和MEC-A被检测出;同时,ClO₂消毒后上述3种SARGs的胞内相对总浓度明显上升（P<0.05）,且ClO₂消毒对胞内SARGs相对浓度的影响与季节有关,其中春季、夏季和秋季均发生上升,且春季升高最为明显,达2倍,而冬季出水在消毒前后均未测出胞内SARGs;胞外SARGs则在ClO₂消毒前后没有明显浓度变化.因此,ClO₂消毒不能有效去除污水处理厂出水中胞内和胞外SARGs污染.     

纳米二氧化钛与镉对斜生栅藻(Scenedesmus obliquus)生长的拮抗效应及其作用机制

人工纳米材料（MNMs）进入水环境将改变传统环境污染物的环境归趋及其毒性作用,两者的相互作用及其机制一直是环境科学领域的热点问题.迄今为止,已有大量MNMs与现存污染物联合毒性作用的研究成果发表,但其潜在的作用机制,尤其是联合作用下的生物响应机制仍未清楚.本文以典型MNMs——纳米二氧化钛（nTiO₂）与重金属镉（Cd²⁺）为研究目标,以斜生栅藻（Scenedesmus obliquus）为受试生物,考察在等效剂量（毒性比1 ∶1）下不同浓度组合nTiO₂和Cd²⁺对斜生栅藻的联合毒性作用模式及其分子机制.结果表明,等效剂量下Cd²⁺和nTiO₂的72h EC₅₀值对比单独暴露时均有显著升高,呈拮抗效应.进一步开展转录组学分析发现,nTiO₂存在下斜生栅藻能量代谢所涉及的光合作用、叶绿素代谢以及淀粉与蔗糖代谢通路发生了显著上调,与藻细胞抗逆效应相关的精氨酸与脯氨酸代谢通路同样呈正向刺激表现.本文首次报道了nTiO₂与Cd²⁺等效剂量联合暴露下,浮游植物通过改变藻细胞抗逆能力与加强能量代谢来降低毒性的生物响应机制.本研究结果为深入理解MNMs与现存污染物的复合环境健康效应提供重要参考和研究基础.     

Elements of Carbon Balance in Oligotrophic Bogs

Elements of carbon balance of oligotrophic bogs were studied using an example of the landscape profile of the Klyuch River in 1998–2000. Carbon balance was preliminarily calculated taking into account the biological productivity, release of carbon dioxide and methane, and carbon outflow with bog waters. Based on the data obtained on the carbon inflow and outflow, the conclusion was made concerning the progressive peat formation in the region studied.     

Preparation and performance of photocatalytic regenerationable activated carbon prepared via sol-gel TiO2

Preparation of photocatalytic regenerationable activated carbon （AC） is the key step for the practical application of in situ regeneration of exhausted AC. A novel photocatalytic regenerationable AC was prepared by sol-gel TiO2 in this work. The adsorption and regeneration performance of TiO2/AC were evaluated using phenol as model compound. Scanning electron microscope （SEM） and nitrogen （77 K） adsorption isotherm were used to determine the surface area, pore structure and the distribution of TiO2. The results showed that with the increase of TiO2 loading, adsorption capacity of TiO2/AC decreased and the regeneration efficiency increased. The photocatalytic regenerationable AC with suitable TiO2 loading （2 wt%） exhibited suitable adsorption capacity and regeneration efficiency. TiO2 located mainly in the entrance of macro-pore of carbon. The prepared TiO2/AC exhibited similar surface structure and pore structure with material carbon.     

Vapour pressures, aqueous solubility, Henry's law constants and air/water partition coefficients of 1,8-dichlorooctane and 1,8-dibromooctane

New data on the vapour pressures and aqueous solubility of 1,8-dichlorooctane and 1,8-dibromooctane are reported as a function of temperature between 20 °C and 80 °C and 1 °C and 40 °C, respectively. For the vapour pressures, a static method was used during the measurements which have an estimated uncertainty between 3% and 5%. The aqueous solubilities were determined using a dynamic saturation column method and the values are accurate to within ±10%. 1,8-Dichlorooctane is more volatile than 1,8-dibromooctane in the temperature range covered (p_sat varies from 3 to 250 Pa and from 0.53 to 62 Pa, respectively) and is also approximately three times more soluble in water (mole fraction solubilities at 25 °C of 5.95 × 10⁻⁷ and 1.92 × 10⁻⁷, respectively). A combination of the two sets of data allowed the calculation of the Henry’s law constants and the air water partition coefficients. A simple group contribution concept was used to rationalize the data obtained.     

Photochemical oxidation of reduced sulfur compounds in an urban location based on short time monitoring data

This study examines the oxidation of reduced sulfur compounds (RSCs) in urban ambient air. The photochemical conversions of RSC (such as DMS, CS₂, H₂S, DMDS, and CH₃SH) to a further oxidized form (e.g., SO₂, MSA, and H₂SO₄) were assessed using a photochemical box model. For our model simulation of RSC oxidation, measurements were taken at an urban monitoring station in Seoul, Korea (37.6° N, 127° E) during three separate time periods (e.g., Sept. 17–18, Oct. 23, and Oct. 27–28, 2003). The results indicate that DMS and H₂S were the dominant RSCs with concentrations of 370 ± 140 and 110 ± 60 pptv, respectively. The photochemical conversion of DMDS to SO₂ was found to occur more efficiently than other RSCs. The overall results of our study suggest that photochemical conversion of RSCs accounted for less than 15% of the observed SO₂ during the measurement period. The SO₂ production from DMS oxidation (mainly by the reaction with OH) was found to be affected primarily by the abstraction channel due to high NO_x levels during the experimental conditions.     

矿用救生舱内二氧化碳净化特性研究

煤矿救生舱是在矿井下发生事故后保护被困矿工生存、等待救援的密闭舱室设备。在救援过程中,二氧化碳的处理是舱内空气净化系统的一项主要功能。本文对救生舱内二氧化碳净化装置的功率、吸收效率、药剂床层厚度等因素进行了一系列试验,确定了救生舱二氧化碳的最优净化方式,并通过救生舱内真人生存试验对其进行了验证。最终得出救生舱内处理二氧化碳最佳反应条件为:药剂量20kg,最佳功率为100W;间歇式工作的运行时间与停机时间比例为2:3;在救生舱内8人生存模拟实验中,得出8kg药剂可供8人使用6.1h,平均吸收速率为1.34L/min。     

伊宁市空气中硫酸盐化速率与二氧化硫相关性研究

对伊宁市1999-2002年空气中硫酸盐化速率和二氧化硫监测值进行回归分析,结果表明,二者之间存在显著的线性正相关关系,但对各年度回归方程斜率和截距进行统计检验,则表现出显著的差异。     

膜吸收器吸收CO2的影响因素研究

采用聚丙烯中空纤维膜吸收器,用水、NaOH和K2CO3 水溶液作为吸收剂进行高浓度CO2 吸收试验,考察了气体流率、吸收剂流率、质量分数以及流动方式对吸收率、传质系数和传质速率的影响.结果表明,随着气体流率增大,CO2的吸收率递减,总传质系数和总传质速率增加.在一定的气体流率下,吸收液流率增大,CO2的吸收率、总传质系数和总传质速率增大;吸收液浓度提高,吸收率增大,总传质系数和总传质速率提高.在气体流率较低时,质量分数为5%和8%的NaOH水溶液为吸收剂时的吸收率、总传质系数和总传质速率比较接近.随着气体流率增大,NaOH质量分数为8%时的吸收率、总传质系数和总传质速率增加的值大大超过NaOH质量分数为5%时增加的值.以水为吸收剂时,气体与吸收剂的流动方式为逆流时的吸收率、总传质系数和总传质速率高于并流时的值.     

光活性二氧化钛膜的制备方法

近二十年来发展起来的光催化技术可利用太阳光能对水体中的多种有机污染物进行降解．这符合可持续发展的长远需要,具有诱人的发展前景。光催化技术利用可再生的清洁资源,氧化能力强．适用于广谱有机物,能使难被一般氧化剂氧化、又难生物降解的污染物降解．是当前太阳能利用及水污染控制方面开辟的前沿领域．在治理环境污染方面具有明显的发展优势。本文以溶胶-凝胶法、金属有机化学气相淀积、煅烧沉淀法等多种方法制备光活性二氧化钛膜。