利用神经网络及数值模拟获取变压边力控制曲线

在应用Dynaform、Autoform等板料数值模拟软件的过程中 ,通常需要对压边力施力曲线进行各种预先的设定 ,但如何选定施力模式一直是一个比较棘手的问题 ,在文中利用数值模拟及MATLAB中的神经网络工具箱得出了压边力的最优控制曲线     

大气污染综合整治规划软件在中小城镇的应用

本文阐述了大气污染综合整治规划软件在北票市的实际应用，以北票市大气污染综合整治为实例，建立了大气污染综合整治计算机处理系统，取得了满意的效果．     

周边式二次沉淀池流态的计算模拟研究

通过计算模拟二沉池流态,解决了二沉池流态测定的难题,该模拟方法速度快、精度高、不需要实型池.通过对实际池的计算发现,周边式二沉池上溢流集中在靠池周边的区域,以垂直向上的流线为主,池中心上部存在着较大的水流死区,由此解释了该类型池澄清能力小的原因.     

方轧件在椭圆孔型中轧制温度场的三维有限元分析

应用MARC/autoforge有限元软件对方轧件在椭圆孔型中的轧制温度场进行了热力耦合模拟.研究了模拟过程中的传热边界条件,分析了轧制前和轧制过程中轧件中温度场的分布和变化规律.模拟计算结果和实验结果的比较说明二者基本是相符的.     

托盘式烟气脱硫喷淋塔空塔冷态流场数值模拟

以600MW机组多孔合金托盘喷淋塔为研究对象,利用国际流行的商用CFD(ComputationalFluidDynamics)软件Fluent及其前处理软件Gambit对烟气脱硫立式喷淋空塔的流场进行二维数值模拟。计算中选用模型作为计算模型,用SIMPLE算法进行计算。计算结果表明,喷淋塔的烟气入口角度以及多孔合金托盘的安装高度对塔内流场分布有一定的影响,安装托盘后气速明显均匀化,斜切式烟气进口流场分布较直进式均匀,还获得了合适的托盘安装高度。     

圆锥形薄壁件成形过程及性能的数值模拟

采用了ANSYS有限元分析软件对圆锥形薄壁件成形过程进行了数值模拟,分析了冲压过程中两类失效形式产生的原因,并提出了相应的解决办法。     

半球形件粘性介质压力成形的数值模拟研究

粘性压力成形技术是金属板材成形领域里新近出现的一种先进的加工工艺。对双面施放粘性介质的板材胀形进行了模拟研究 ,在双面施放介质的板材粘性介质胀形时 ,排放孔位置分布对毛坯成形过程有明显的影响。排放孔位置分布的不同造成模腔内介质的速度场不同 ,进而导致板材不同部位的流动速度的方向大小发生变化 ,最终使成形件的厚度分布不同     

上海市在用车推行I/M制度中检测方法的研究

对在用车实施I/M制度，采用底盘测功机模拟道路工况检测汽车排放污染物，按美国国家环保局（EPA）推荐的方法有3种：瞬态短工总法（IM240）、稳态加速模拟工况法（ASM）和瞬态短工部简易质量分析检测法（VMAS）。根据上海市的试验结果，对上述3种方法的检测精度、设备投资以及运行维护诸方面进行分析比较，阐明上海市采用VMAS方法的依据和应注意的问题，并对应采用的模拟道路工况提出了看法。     

Differential N uptake by maize cultivars and soil nitrate dynamics under N fertilization in West Africa

Nitrate is prone to leaching in the sandy soils of the West African moist savannas. Better management of nitrogen (N) resources and maize cultivars with enhanced genetic capacity to capture and utilize soil and fertilizer N are strategies that could improve N-use efficiency. In two field experiments conducted at Zaria, northern Nigeria, five maize (Zea mays L.) cultivars planted early in the season were assessed under various N levels for differences in N uptake, soil N dynamics, and related N losses. Cultivar TZB-SR accumulated more N in the aboveground plant parts in both years than the other cultivars. All, except the semi-prolific late (SPL) variety, met about 50–60% of their N demand by the time of silking (64–69 DAP). In both years, SPL had the greatest capacity to take up N during the grain filling period, and it had the highest grain-N concentration and the least apparent N loss through leaching in the second year. There were no significant differences in soil N dynamics among cultivars in both years. At harvest, the residual N in the upper 90 cm of the profile under all the cultivars ranged from 56 to 72 kg ha⁻¹ in the first year and from 73 to 83 kg ha⁻¹ in the second year. Apparent N loss from 0 to 90 cm soil profile through leaching ranged from 35 to 122 kg ha⁻¹ in both years. N application significantly increased N uptake by more than 30% at all sampling dates in the second year of the experiment, but had no effect on apparent N loss. Results indicate that the use of maize cultivars with high N uptake capacity during the grain filling period when maximum leaching losses occur could enhance N recovery and may be effective in reducing leaching losses of mineral N in the moist savanna soils.     

A strategic design approach to develop sustainable product service systems: examples taken from the ‘environmentally friendly innovation’ Italian prize

The product service systems’ (PSS) sustainability potential is described in the framework of the new types of stakeholder relationships and/or partnerships, producing new convergence of economic interests, and a potential concomitant systemic resources optimization.In this perspective, it is argued that the design competencies should move towards those of the ‘strategic design’, thus introducing the concept of ‘strategic design for sustainability’: the design of an innovation strategy, shifting the business focus from designing (and selling) physical products only, to designing (and selling) a system of products and services which are jointly capable of fulfilling specific client demands, while re-orienting current unsustainable trends in production and consumption practices.Some examples of PSS are presented and discussed using the PSS categories ‘services providing added value to the product life cycle’, ‘services providing final results to customers’, and ‘services providing enabling platforms for customers’. The cases derive from an analysis of the ‘environmental friendly innovation’ yearly endowed prize submissions. The Politecnico di Milano University together with the Bocconi University and Legambiente (an environmental NGO) promotes the initiative in Italy.