烟气测试中流速计算误差分析

本文通过对烟气测试中流速计算公式的比较分析，结合实际监测数据处理，认为烟气流速计算中，使用通用公式与简化公式的误差，虽然与Ｒｓ和Ｂｓ有关，但主要误差来源于Ｂｓ。而Ｒｓ不必用精密仪器测出烟气中各组份后求算。只要用简易仪器测得烟气中的Ｘｏ２和Ｘｓｗ的百分含量，即可求出Ｒｓ近似值，用于烟气流速计算。     

饱和软土刚性长短桩复合地基——强度及变形实用计算公式

刚性长短桩复合地基有许多特点，如桩体均为刚性、短桩及长桩桩端为低压缩或中压缩性土等。长短桩复合地基的设计理论目前仍处于研究阶段，现行规范中尚无有关其强度及变形的具体计算方法。重点探讨了饱和软粘土体上采用刚性长短桩复合地基的强度及变形理论，并提出了适用于工程应用的实用计算方法。     

实际烟气生成量计算方法的商榷

火灾烟气是火灾时所产生的气体和悬浮在其中的烟粒子的总称，是燃烧和热解产物的混合物。烟气量的大小取决于可燃物本身的燃烧性能、空气供给量等。火灾烟气具有缺氧、毒害、尘害、高温的特点，加上火场火灾烟气的减光性和恐怖性，使火灾烟气成为火灾人员伤亡的最主要原因，为此防排烟工程的设计对建筑消防安全非常重要，实际烟气生成量计算是防排烟工程设计的理论基础，就目前一些文献对实际烟气量计算方法存在的不足进行了探讨，并提出了一个新的计算方法，对两种方法的计算结果进行了对比，得出结论认为，计算实际烟气量应从实际空气供给量是否过剩或不足两种情况分别进行考虑计算。     

论生物学书稿中量与符号的规范化问题

随着国际科教交流活动的增加,在生物学研究中采用与推广新的量与符号的国际出版标准正变得日益重要,作为生物学书稿的资深编辑,本文讨论了生物学书稿中通常使用的量、符号、名词术语和其它的统计符号.     

圆柱体相似试件的拉裂破坏模型研究

首先简单介绍了单轴压缩试验的具体情况。对于拉裂破坏模式,提出了相应的力学计算模型,并建立了抗压强度和抗拉强度的关系式。对于由拉裂面的存在而导致试件最终破坏的计算模型,提出了4种相应的假设。其中,对4种特征的拉裂面建立了抗压强度和抗拉强度的关系式。     

“碳中和”愿景下我国碳排放现状和减排路径

控制以CO₂为主的温室气体排放，“力争2030年前实现碳达峰，争取2060年前实现碳中和”是我国近年来面临的重大任务。碳排放研究是实现“双碳”目标的基础和前提，从碳排放测算、碳排放影响因素分析、行业碳排放研究三个方面对我国碳排放研究现状进行梳理，对近年来研究的重点方向、主要成果和目前存在的主要问题进行分析，并结合我国的“双碳”目标提出现阶段我国“以完善政策标准与加大政府扶持为基础，以产业结构调整与新兴产业发展、能源结构调整与新能源技术发展为核心，以探索CCUS（碳捕集、利用与封存）技术和增加碳汇及对居民低碳消费倾向的引导和培养为导向”的碳减排路径。     

L型钢管混凝土芯柱耐火极限研究

火灾高温对结构安全有显著影响,为研究等肢L形钢管混凝土芯柱的耐火极限及其影响因素,利用ABAQUS软件建立合理的高温反应分析模型,在验证模型可靠性基础上,分析了荷载比、截面边长、长细比、荷载偏心率、含钢率等对L形钢管混凝土芯柱耐火极限的影响。研究结果表明:在一定参数范围内,荷载比和截面边长是构件耐火极限的主要影响参数,荷载比越小,截面边长越大,构件的耐火极限越高;长细比和荷载偏心率对其影响较大,长细比和荷载偏心率越小,构件的耐火极限越高;含钢率对其影响不显著。结果可为异形钢管混凝土芯柱的抗火安全设计提供参考。     

An easy method to design gas/vapor relief system with rupture disk

Tank discharge gas/vapor flow problems are frequently encountered in both practice and design. To perform this type of design calculation, the first step is to identify whether the flow is choked or not through a trial-and-error solution of an equation for adiabatic flow with friction from a reservoir through a pipe. Developing a direct method without any trial-and-error to identify a choking condition would be helpful for expediting the flow calculations. This paper presents an easy and quick method to identify the choking of gas flow for an emergency relief system consisting of a rupture disk and vent piping. This greatly simplifies the design calculations. The proposed method for validating the venting adequacy of existing ERS circumvents the iteration calculation and the use of Lapple charts. Three case studies for the design of vent piping for rupture disks support the proposed method.     

The effects of temperature on decomposition and allelopathic phytotoxicity of boneseed litter

Decomposition of plant litter is a fundamental process in ecosystem function, carbon and nutrient cycling and, by extension, climate change. This study aimed to investigate the role of temperature on the decomposition of water soluble phenolics(WSP), carbon and soil nutrients in conjunction with the phytotoxicity dynamics of Chrysanthemoides monilifera subsp. monilifera(boneseed) litter. Treatments consisted of three factors including decomposition materials(litter alone, litter with soil and soil alone), decomposition periods and temperatures(5–15, 15–25and 25–35°C(night/day)). Leachates were collected on 0, 5, 10, 20, 40 and 60 th days to analyse physico-chemical parameters and phytotoxicity. Water soluble phenolics and dissolved organic carbon(DOC) increased with increasing temperature while nutrients like SO-24 and NO-13 decreased. Speed of germination, hypocotyl and radical length and weight of Lactuca sativa exposed to leachates were decreased with increasing decomposition temperature. All treatment components had significant effects on these parameters. There had a strong correlation between DOC and WSP, and WSP content of the leachates with radical length of test species. This study identified complex interactivity among temperature, WSP, DOC and soil nutrient dynamics of litter occupied soil and that these factors work together to influence phytotoxicity.     

Research on whole life cycle carbon emission model of typical buildings

Based on the theory of life cycle assessment (LCA), this article analyzes the influence factors on carbon emissions from residential buildings. In the article, the life cycle of residential buildings has been divided into five stages: building materials production period, construction period, operation and maintenance period, demolition period, and solid waste recycle and disposal period. Based on this definition, the authors provide a theoretical model to calculate carbon emissions of residential building life cycle. In particular, the factor of human activities was introduced in the calculation of carbon emissions from the buildings. Furthermore, the authors put forward a model for calculation with the unit of carbon emissions for per-capita living space.