陆上原油长输管道泄漏爆炸事故情景构建研究

以某陆上原油长输管道为例,设定了陆上原油长输管道泄漏爆炸事故情景背景信息及演化过程,从预防、准备、预警、响应、恢复等阶段,梳理分析了事故情景应对全过程的任务及职责主体;针对各项任务从计划预案、人员队伍、装备物资、培训演练、运行机制等方面开展了情景应对能力评估;并针对存在的差距和不足,从企业和政府2个层面提出了针对此类情景的应急能力提升对策建议。该研究可为相关政府及企业加强油气长输管道事故应急准备能力建设提供参考。     

Law of variation for low density polyethylene dust explosion with different inert gases

To reveal the effects of different inert gases on explosion characteristics during low density polyethylene (LDPE) dust explosion and optimize the explosion-proof process, eight N₂ (CO₂)/air mixed inerting conditions were experimentally studied. Typical inerting conditions with 12 L cylindrical explosive tank were used to study the characteristics on the flame propagation. The thermogravimetric analysis with related theories were used to further explain the mechanism and quantities in low density polyethylene (LDPE) dust explosion with different inert gases. The results showed that the reduction of O₂ concentration could effectively delay the progress of flame growth process and weaken the effect of dust combustion reaction. The flame growth process of condition (N₂/air (18% O₂)) was 2.05 times slower than that of the non-inert condition. The explosion strength was obviously reduced, and the characteristic parameters such as explosion pressure and flame propagation speed were also affected by the decrease of O₂ concentration. For LDPE powder, the smaller the median diameter, the greater the explosion intensity and the lower the limiting oxygen content (LOC). The LOC with CO₂ was usually higher than that with N₂ and the effect of CO₂ was significantly better than N₂ in inerting.     

Ignition temperatures of dust layers and bulk storages in hot environments

In many industrial installations, particulate solids (cereals, agri-food products, coal, plants, etc.) are stored or processed. Self-heating of these products, which can lead to fires and explosions, can occur in a variety of situations. Examples include large storage at room temperature, formation of a layer on a hot surface, layer deposited on a surface – insulating or conductive – in a hot environment or even storage of product exposed to heating on one side.The main parameters that determine the occurrence of self-heating are the size of the container, the temperature, the residence time and the characteristics of the product. Depending on the type of situation encountered and these implementation conditions, the analysis of self-heating risks must be based on specific models and/or parameters.This paper presents the different variants and combinations of the theoretical model from the theory of thermal runaway to represent self-heating, taking into account in particular the symmetry or asymmetry of heating, reagent consumption and boundary conditions. It also discusses their adaptation to the previous identified industrial situations.Nine products were chosen to be representative of those used in the different considered industrial situations. They were subjected to self-heating basket tests in isothermal ovens in order to determine the parameters for applying the described theoretical models. These results were compared with the results of self-heating tests in layers of different thicknesses in a hot environment, on an insulating or conductive plate, using a specially developed test protocol, as well as with the results of standardized tests of minimum ignition temperature in 5 mm layers.This led to the proposal of the most appropriate theoretical model to represent the self-heating phenomenon for each of the four identified industrial situations.This analysis can promote better design of industrial equipment and production conditions (temperatures, volumes or product flows …) in order to prevent fires and explosions.     

用热分析法研究鼎湖山土壤的粘粒矿物

广东鼎湖山自然保护区的土壤主要为山地黄壤和赤红壤。本文用差热-热重-微商热重(DTA-TG-DTG)联合热分析法,对两种土壤的粘粒矿物进行了初步研究,确认两种土壤的粘粒矿物组成主要为伊利石、高岭石、三水铝石、蛭石、针铁矿等。伊利石、三水铝石、蛭石的含量山地黄壤多于赤红壤,而高岭石则相反。两种土壤的风化程度不高,土壤矿物风化主要处于幼年阶段,山地黄壤尤其明显。另外,对不同林型下的赤红壤也进行了对比研究,其粘粒矿物组成和数量差异不大。     

A very simple yet accurate solution to the thermal explosion problem

A very simple solution to the thermal explosion problem for one-dimensional solids is presented. The solution produces analytical expressions for the criticality condition. Two different solutions are used. One solution gives higher answers than those known from exact solutions and the second solution gives lower answers. This allows bracketing the expected answer with a determined tolerance. The results obtained compare quite favorably with those obtained from known exact numerical solutions. This allows the utilization of the present method for many a practical problem with an acceptable tolerances.     

Use of Airborne Thermal Imagery to Detect and Monitor Inshore Oil Spill Residues During Darkness Hours

/ Trials were conducted using an airborne video system operating in the visible, near-infrared, and thermal wavelengths to detect two known oil spill releases during darkness at a distance of 10 nautical miles from the shore in St. Vincent's Gulf, South Australia. The oil spills consisted of two 20-liter samples released at 2-h intervals, one sample consisted of paraffinic neutral material and the other of automotive diesel oil. A tracking buoy was sent overboard in conjunction with the release of sample 1, and its movement monitored by satellite relay. Both oil residues were overflown by a light aircraft equipped with thermal, visible, and infrared imagers at a period of approximately 1 h after the release of the second oil residue. Trajectories of the oil residue releases were also modeled and the results compared to those obtained by the airborne video and the tracking buoy. Airborne imagery in the thermal wavelengths successfully located and mapped both oil residue samples during nighttime conditions. Results from the trial suggest that the most advantageous technique would be the combined use of the tracking beacon to obtain an approximate location of the oil spill and the airborne imagery to ascertain its extent and characteristics.KEY WORDS: Airborne video; Thermal imagery; Global positioning; Oil-spill monitoring; Tracking beacon     

热喷处理污泥及其复混肥的养分效率与生物效应

采用室内分析和田间生物试验，研究了热喷处理污泥及其复混肥的养分供应能力及它们在农地上施用对土壤肥力、青菜产量及其品质的影响。结果表明：热喷处理能有效杀灭污泥中病原物，除自，并可使污泥中水溶性有机碳和速效氮含量分别提高87％，19％和35％，施用热喷污泥制成的复混肥不但比等养分的无机复合肥多增产38％，而且青菜体内Vc和水溶性总糖等营养品质也有明显的提高，NO3^-却只有无机复合肥处理的一半左右，污泥经势喷处理有利于提高污泥中养分的生物有效性，特别是热喷污泥制成的复混肥氮磷养分利用率显著高于无机复合肥，施用污泥和污泥复混肥还能提高土壤肥力，比单纯大量施用污泥要安全得多，土地使用年限可延长40倍。     

Phytotoxicity and groundwater impacts of leaching from thermal treatment residues in roadways

The use of coal fly ash (CFA), municipal solid waste incinerator bottom ash (MSWIBA) and flue gas desulfurization residue (FGDR) in road construction has become very common owing to its economical advantages. However, these residues may contain toxic constituents that pose an environmental risk if they leach out and flow through the soil, surface water and groundwater. Therefore, it is necessary to assess the ecotoxicity and groundwater impact of these residues before decisions can be made regarding their utilization for road construction. In this study, the physico-chemical characteristics, leaching and phytotoxicity of these residues were investigated. Specifically, multivariate analyses were used to evaluate the contributions of the leaching constituents of the CFA, MSWIBA and FGDR leachates to the germination index of wheat seeds. B, Ba, Cr, Cu, Fe and Pb were found to be more toxic to the wheat seeds than the other heavy metals. Furthermore, the leached concentrations of the constituents from the CFA, MSWIBA and FGDR were below the regulatory threshold limits of the Chinese identification standard for hazardous wastes. Analyses conducted using a numerical groundwater model (WiscLEACH) indicated that the predicted field concentrations of metals from the CFA, MSWIBA and FGDR increased with time up to about 30 years at the point of compliance, then decreased with time and distance. Overall, this study demonstrated that the risks resulting from MSWIBA, CFA and FGDR leaching could be assessed before its utilization for road construction, providing crucial information for the adoption of these alternative materials.     

蒸汽锅炉爆炸危险性分析及预防措施

简要叙述了锅炉爆炸机理及爆炸冲击波的破坏、伤害作用,采用TNT当量法对中国石化胜利油田石化总厂动力蒸汽锅炉爆炸事故后果进行了预测计算,分析了导致锅炉爆炸事故发生的原因,并给出了应对措施。     

火电湿法烟气脱硫塔模拟及优化操作分析

基于火电石灰石-石膏湿法烟气脱硫工艺,以华能福州电厂实际生产数据为依据,经对设备分别简化建模,建立了反映实际脱硫过程的脱硫塔模型,形成全工艺模拟流程,模型计算结果和实际运行数据间平均误差为0.4364%.对脱硫工艺过程进行灵敏度分析,得出循环浆液pH值、烟气流量、液气比等因素对吸收效率的影响.最后,以灵敏度分析结论为基础,借助多目标优化方法分析不同工况下各控制因素对脱硫效率的影响,得到基本优化控制范围(pH值处于5.4～5.6、烟气压力处于0～1000Pa)和相应的最优控制方案,并分析了优化操作结果的工业适用性.