Minimum ignition energy of LDPE dust/ethylene hybrid mixture

An experimental device for evaluating the minimum ignition energy (MIE) of LDPE dust/ethylene hybrid mixture was built with the innovative mixing mode. The MIE of the hybrid mixture that contained ethylene below its lower explosive limit (LEL) was studied. The result indicated that adding a small amount of ethylene significantly reduced the MIE of the original dust cloud. All the MIEs with five different particle sizes were found to show similar trends of exponential attenuation with the increase of ethylene concentration; such attenuating effect grew as the dust particle size rose. When ethylene concentration increased and approached to its LEL, the reaction mechanism dominated by combustible dust turned into one dominated by combustible gas. The MIE decreased first and then increased with the dust mass and increased with the dust particle size. A multifactor mathematical correlation model of the MIE with the dust particle size and ethylene concentration was developed.     

Simulation of the flow of an explosive atmosphere exposed to a hot surface

The accidental ignition of combustible atmospheres by hot surfaces is of great concern for chemical and process plant safety. In this paper, we present our research regarding the evolution of thermal plumes originating from hot hemispheres and discs. In particular, we focus on the effect of the orientation of the surface on the ignition process. The auto-ignition temperatures and ignition locations were studied experimentally. To get further insight, we conducted detailed numerical simulations and validated them with measurements. Three-dimensional simulations were performed on hot hemispheres and hot discs for different orientations ranging from 0° to 180°. The solver employs a transient, implicit scheme which is based on the coupled heat transfer and flow equations. The mesh in the vicinity of the hot surfaces is refined to resolve the steep temperature gradients and to capture the boundary layer separation. The influence of the orientation on critical hot spots in the gas mixture is analysed by examining the flow structures and the temperature evolution of the buoyancy-driven flow. Using the obtained results, we discuss the change of the onset and location of the ignition.     

Thermal hazard and decomposition kinetics of 1-butyl-2,3-dimethylimidazolium nitrate via TGA/DSC and FTIR

1-Butyl-2,3-dimethylimidazolium nitrate ([Bmmim][NO₃]), a kind of versatile and novel ionic liquids, is widely applied in the modern petrochemical industry. Nevertheless, its thermal hazard safety data at high temperature or thermal disturbance conditions are currently unavailable. Therefore, this study aimed to characterize the thermal risk of [Bmmim][NO₃] through auto-ignition temperature measurements, flash point analysis, thermal gravimetric analysis/differential scanning calorimetry (TGA/DSC), TGA-Fourier transform infrared spectroscopy (TGA-FTIR) and thermal decomposition kinetics analysis. Additionally, [Bmmim][NO₃] was examined using isothermal thermogravimetric analysis at different temperatures (220, 230, 240, 250, 260 and 270 °C). The experimental results show that the flash point of [Bmmim][NO₃] is 305.70 ± 9.30 °C and the auto-ignition temperature is 341.00 ± 21.60 °C with an ignition delay time of 8.6 s. In addition, using the nitrogen atmosphere TGA data to calculate the activation energy according to the Friedman, Kissinger and Flynn-Wall-Ozawa methods, roughly the same results were obtained. Finally, TGA-FTIR results show that [Bmmim][NO₃] produced acetylene, butane, butanol and carbon dioxide during the thermal decomposition process. This study could provide data support and some guidance for the thermal hazard assessment and safety control of [Bmmim][NO₃] during its use and storage.     

Review of hydrogen safety during storage,transmission, and applications processes

Hydrogen is considered an excellent clean fuel with potential applications in several fields. There are serious safety concerns associated with the hydrogen process. These concerns need to be thoroughly understood and addressed to ensure its safe operation. To better understand the safety challenges of hydrogen use, application, and process, it is essential to undertake a detailed risk analysis. This can be achieved by performing detailed consequence modellings and assessing risk using the computational fluid dynamics (CFD) approach. This study comprehensively reviews and analyses safety challenges related to hydrogen, focusing on hydrogen storage, transmission, and application processes. Range of release and dispersion scenarios are investigated to analyse associated hazards. Approaches to quantitative risk assessment are also briefly discussed.     

Experimental study on the inhibition of methane/air explosion by modified attapulgite powder

In order to explore the influence of attapulgite powder on the methane explosion, a small-size semi-closed visual explosion experiment platform was built, and experiments were carried out. The effect of spraying powder on the whole process of methane explosion was studied when methane concentration was 7%, 8%, 9.5%, 11% and 12%, respectively. When the methane concentration was 11%, the maximum explosion overpressure dropped by modified spraying attapulgite powder was as high as 33.26%, and at the same time, the reduction rate of flame propagation velocity reached the maximum value of 36.65%. Furthermore, when the methane concentration was 9.5%, the experimental results when the powder spraying amount of modified attapulgite was 120 mg, 160 mg, 200 mg, 240 mg and 280 mg showed that when the powder spraying was 240 mg, the maximum explosive overpressure decreased by 33.14%, and the reduction rate of the peak flame propagation velocity reached the maximum value of 33.73%. Through the video images recorded by the high-speed camera, the flame structure, shape, color, etc. Were analyzed. The characterization analysis illustrated that the modified attapulgite powder has a small particle size, relatively large porosity and specific surface area. Also, it has a high weight loss rate. Combined with the results of characterization analysis, the explosion suppression mechanism of modified attapulgite powder was discussed. It was found that the modified attapulgite powder could effectively absorb the active free radicals generated in the explosion, and the modified new chemical components have a better thermal decomposition and endothermic effect and a better suppression of methane explosions.     

泄爆面积比对泄爆门封闭泄爆特性的影响研究*

为研究泄爆面积比对泄爆门泄爆特性的影响,运用FLUENT软件建立煤矿井下1∶1巷道模型,在不同泄爆面积比的工况下对瓦斯爆炸传播规律及泄爆过程进行模拟,分析其变化特征和封闭泄爆效果。结果表明:S0工况条件下,压力和温度衰减后保持在0.29 MPa和565 K;S1~S4工况条件下,S4比S1,S2和S3达到封闭状态时间快780,260,50 ms,封闭时间最大节省70.91%;随着泄爆面积比的增大,封闭火区内的压力的峰值、峰值数量和达到封闭状态时间减小,泄爆能力增强;火焰速度峰值和衰减速率增大;温度的初始峰值、峰值数量和达到稳定状态时间减小,最大峰值反而增大,说明泄爆门对瓦斯爆炸火焰无抑制作用。     

三环唑粉尘爆炸特性研究

利用激光粒度仪对三环唑粉尘的粒径分布进行分析,并用20 L爆炸球测试装置、哈特曼管装置探讨了粉尘质量浓度、点火延迟时间、点火能量、粒径分布对粉尘爆炸的影响并总结了相关规律。实验结果表明:粉尘粒度是影响粉尘最小点火能和爆炸下限的单调因素,粉尘质量浓度是影响粉尘爆炸压力的极值因素,点火延迟时间是影响粉尘最小点火能的极值因素。     

EVA树脂粉尘/甲烷/空气杂混物爆炸特性

在20 L爆炸实验装置中,开展了3种不同中值粒径的EVA树脂粉尘/甲烷/空气所组成的杂混物爆炸特性研究,探究了甲烷浓度对粉尘爆炸下限、最大爆炸压力的影响。结果表明,尽管添加的甲烷气体浓度低于爆炸下限,仍使得粉尘爆炸下限得以降低,粒径较大的EVA III粉尘,当甲烷体积分数为1%时,爆炸下限降低约25%;粒径较小的EVA I粉尘,当混入甲烷体积分数为4%时,爆炸下限则降低80%;甲烷体积分数每增加1%,可燃粉尘最大爆炸压力上升约10%,但对于粒径较小的EVA I粉尘,当甲烷体积分数为4%时,最大爆炸压力的上升呈现突变趋势,上升近50%。     

Minimum ignition energy of medicinal powder – Florfenicol and Tilmicosin

This work aims to help improve the electrostatic safety design and explosion prevention of medical facilities. In this study, the minimum ignition energies (MIEs) of Florfenicol, Tilmicosin and mixtures of Florfenicol and Tilmicosin at ratios of 1:1, 1:2, 2:1 and 1:4 were measured in a Hartmann apparatus. The results demonstrated that the MIEs for Florfenicol, Tilmicosin and mixtures of Florfenicol and Tilmicosin at ratios of 1:1, 1:2, 2:1 and 1:4 are 200, 70, 180, 150, 200 and 110 mJ, respectively. Tilmicosin is more sensitive to static electricity, which is more dangerous than the other two powders examined in this paper. Furthermore, the MIEs of the mixtures are proportional to the Florfenicol content. For all powders, the MIE first decreased with the powder mass and later reached its minimum value. In addition, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) were used to investigate the morphological specificity and thermal decomposition of the powders to elucidate the parameters governing the powder explosions further.     

石英灯辐射式瞬态热环境试验关键技术分析

结合石英灯辐射式加热器的特性,从传感器弱信号传输、无功补偿、智能控制、仿形加热器、开环试验技术等角度出发,分析了对型号瞬态热试验性能的影响。结合瞬态热试验的实施,给出了上述几个角度制约热试验实施的改进措施,以期提高试验系统瞬态热试验的有效性。