铝穹顶储罐雷击损伤及燃爆风险研究

针对铝穹顶储罐雷击问题,开展了回击后长持续时间雷电流分量作用下的铝合金板烧蚀损伤试验研究,分析了铝穹顶储罐损伤及油气燃爆风险。结果表明:当直流分量为164 C时,2 mm铝板发生穿孔,铝穹顶储罐存在雷击燃爆风险;当直流分量≤157 C时,未穿孔,背面温度最高为480℃,存在燃爆风险,铝穹顶储罐存在雷击燃爆风险;当直流分量196 C时,4 mm铝板发生穿孔;当直流分量为196 C时,6 mm铝板未发生穿孔,背面温升为125℃,小于205℃,铝穹顶储罐不存在雷击燃爆风险。     

Thermal defluorination behaviors of PFOS,PFOA and PFBS during regeneration of activated carbon by molten salt

• New method of mineralizing PFCs was proposed. • Activated carbon was regenerated while mineralizing PFCs. • Molten NaOH has good mineralization effect on PFOS and PFBS. Current study proposes a green regeneration method of activated carbon (AC) laden with Perfluorochemicals (PFCs) from the perspective of environmental safety and resource regeneration. The defluorination efficiencies of AC adsorbed perfluorooctanesulfonate (PFOS), perfluorooctanoic acid (PFOA) and perfluorobutanesulfonate (PFBS) using three molten sodium salts and one molten alkali were compared. Results showed that defluorination efficiencies of molten NaOH for the three PFCs were higher than the other three molten sodium salts at lower temperature. At 700°C, the defluorination efficiencies of PFOS and PFBS using molten NaOH reached to 84.2% and 79.2%, respectively, while the defluorination efficiency of PFOA was 35.3%. In addition, the temperature of molten salt, the holding time and the ratio of salt to carbon were directly proportional to the defluorination efficiency. The low defluorination efficiency of PFOA was due to the low thermal stability of PFOA, which made it difficult to be captured by molten salt.The weight loss range of PFOA was 75°C–125°C, which was much lower than PFOS and PFBS (400°C–500°C). From the perspective of gas production, fluorine-containing gases produced from molten NaOH-treated AC were significantly reduced, which means that environmental risks were significantly reduced. After molten NaOH treatment, the regenerated AC had higher adsorption capacity than that of pre-treated AC.     

基于FLACS的海上钻探平台井喷爆炸事故后果模拟分析*

为研究海上钻探平台井喷燃爆事故后果,运用FLACS软件对某深海钻探平台井喷爆炸事故进行模拟,研究在不同事故场景下气云爆炸发展过程及平台荷载分布规律,讨论井喷速率、风向、点火位置等对爆炸超压的影响。研究结果表明:随泄漏速率增加,爆炸强度和爆炸范围均增大,爆炸严重程度不仅与井喷速率密切相关,同时也受平台结构影响;点火位置会对爆炸超压产生影响,在可燃气体与空气混合气体比例为化学理论当量比处点燃气体,生活区承受的爆炸超压最大;在设施及建构筑物分布较为密集、拥塞度较高的地方产生的爆炸超压更大。研究结果可为可为平台的阻隔防爆性能设计与应急响应提供指导。     

初始扰动对CO2抑制瓦斯爆炸特性研究*

为了预防实际生产过程中发生的瓦斯爆炸事故,利用20 L球形爆炸装置,通过改变粉尘仓充压压力产生不同的扰动,研究9.5%CH4浓度下不同扰动条件对CO2抑爆特性的影响。通过对所得参数进行分析,得到CO2抑爆特性与初始扰动的关系。研究结果表明:相较于均匀静置状态,初始扰动的存在均能提高CH4的爆炸强度,当引发初始扰动的粉尘仓压力为1.5 MPa时,最大爆炸压力达到0.78 MPa;随CO2浓度增大,爆炸强度整体下降,呈二次下降趋势、最大爆炸压力时间呈上升趋势,且各初始扰动压力间爆炸强度均大于均匀静置状态、最大爆炸压力时间小于均匀静置状态;同时利用CHEMKIN软件得到绝热平衡压力,计算热损失参数发现,同一气体混合比例工况下,初始扰动状态的热损失及热损失分数明显低于均匀静置状态的,且当CO2浓度为15%时,差距最大,不同初始扰动间热损失及热损失分数最小值分别为0.013 19 kJ/m2,17.9%,远小于静置状态下0.036 29 kJ/m2,46.4%,说明初始扰动对于CO2抑爆效果存在削弱作用。     

Techno-economic evaluation of ultrasound and thermal pretreatments for enhanced anaerobic digestion of municipal waste activated sludge

To enhance the anaerobic digestion of municipal waste-activated sludge (WAS), ultrasound, thermal, and ultrasound + thermal (combined) pretreatments were conducted using three ultrasound specific energy inputs (1000, 5000, and 10,000 kJ/kg TSS) and three thermal pretreatment temperatures (50, 70 and 90 °C). Prior to anaerobic digestion, combined pretreatments significantly improved volatile suspended solid (VSS) reduction by 29-38%. The largest increase in methane production (30%) was observed after 30 min of 90 °C pretreatment followed by 10,000 kJ/kg TSS ultrasound pretreatment. Combined pretreatments improved the dimethyl sulfide (DMS) removal efficiency by 42-72% but did not show any further improvement in hydrogen sulfide (H₂S) removal when compared with ultrasound and thermal pretreatments alone. Economic analysis showed that combined pretreatments with 1000 kJ/kg TSS specific energy and differing thermal pretreatments (50-90 °C) can reduce operating costs by $44-66/ton dry solid when compared to conventional anaerobic digestion without pretreatments.     

A study on the obstacle-induced variation of the gas explosion characteristics

A study on the variation of the gas explosion characteristics caused by the built-in obstacles was conducted in enclosed/vented gas explosion vessels. It has been well known that the obstacles in pipes and long ducts would accelerate the flame propagation, and cause the transition from deflagration to detonation. In this study, the explosion characteristics and the flame behavior of vented explosions and constant-volume explosions were investigated. Experiments were carried out in a 270-liter and 36-liter hexahedron vessels filled with LPG–air mixture. The explosion characteristics of the gas mixture were determined by using a strain-responding pressure transducer. The flame behavior was recorded by using a high-speed video camera. The shape and the size of the obstacle, and the gas concentration, were adjusted in the experiments.

It can be seen from the experimental results that, instead of being accelerated, the flame propagation inside the explosion vessel is decelerated by the plate obstacles fixed at the bottom of the vessel. Also, the characteristics of the enclosed explosion are not so affected by the built-in obstacles as those of the vented explosion are. It is believed that the eddy-induced turbulence behind the obstacle decelerates the flame propagation.     

Characteristics of the vibrating-mesh minimum ignition energy testing apparatus for dust clouds

A novel apparatus for testing the minimum ignition energies of flammable dusts is introduced. Unlike the conventional apparatus (the Hartmann tube), this new apparatus employs a vibrating mesh to produce a dust cloud. Using three kinds of powders, namely lycopodium, anthraquinone and polyacrylonitrile, which are designated as the samples for calibration by the International Electrotechnical Commission (IEC, 1994) standards, fundamental characteristics were experimentally investigated. Concerning the minimum ignition energies (MIEs), the new testing apparatus worked well for two samples, lycopodium and polyacrylonitrile. The MIE for anthraquinone, however, was by far larger than the expected value. We concluded that the aggregation of anthraquinone particles is the main cause of the difference and is attributable to both the tribo-charges acquired by the particles when passing through the mesh and the filamentary shape of the crystal. Other essential factors for characterizing the testing apparatus, such as the concentration of dust, the shape and spacing of the sparking electrode system, and the impedance of the sparking circuit are discussed.     

反应失控型火灾爆炸事故预测

介绍了一种预测反庆失控灾害的方法,通过实验测定容器的时间常数,预测能够引起反应失控的最低环境温度,发生反应失控时的危险温度,以及达到最大反应速度反需的时间,预测结果与实际情况具有良好的一致性。     

一起非法自制的土锅炉爆炸事故分析

通过介绍自制土锅炉的结构及制造过程,分析了其发生爆炸事故的原因。     

阴燃中出现有焰火的理论初探

阴燃是一种自维持,不断传播的,异相反应的放热燃烧过程。典型的阴燃例子有蚝烟,地下煤矿的燃烧等。从热安全角度来看阴燃过程,不完全的氧化反应和可燃物热解都会产生很多的有毒气体,对人造成危害;另外在一定的条件下,阴燃还会突然转化为有焰火,进行更猛烈的燃烧,造成更大的破坏。