潜流人工湿地基质堵塞的研究进展

潜流人工湿地是城市污水深度处理和农村污水分散处理的有效技术,但存在的基质堵塞问题因可缩短其使用寿命而极大降低了该技术的经济优势,成为制约其发展的瓶颈和研究的重点.在分析潜流人工湿地基质堵塞影响因素的基础上,探讨了其堵塞的机理和模型,提出了预防措施和恢复对策.前期进水预处理、进行湿地数值模拟和强化运行管理等能有效解决人工湿地堵塞问题.     

火灾引发超高层建筑非连续倒塌模拟研究

为了解超高层建筑发生火灾后变形特征及失稳后的非连续坍塌过程,掌握引起变形和坍塌的原因,将三维颗粒流软件(PFC3D)作为模拟平台,设置核心筒-框架结构的超高层建筑火灾区域,并模拟坍塌过程。在考虑钢筋和混凝土共同作用结果的基础上,提出火灾区域中构件属性设置方法及模拟步骤。分析得到造成建筑结构摆动的3种原因,一是火区位置不同导致上部结构对火区的压力不同,二是火区位置不同导致结构受到的约束不同,三是受热膨胀性使构件产生不同程度变形。结果表明:燃烧温度为500℃,3 h后建筑发生摆动,表现出对火区位置和燃烧时间敏感的特征。1 000℃下1 h内,建筑物首先发生破坏的是梁构件,然后是承重柱。即建筑一旦进入结构破坏阶段,坍塌将是迅速且不可逆的。     

絮凝动力学的现状与研究方法进展

在絮凝动力学的发展中先后提出了Smoluchowski理论、Camp-Stein理论和微涡旋理论,但迄今尚存在若干不足,特别是还不能全面揭示湍流絮凝的致因,也未能得到符合实际的湍流絮凝速度方程,严重影响了水处理絮凝工艺与设备的设计及放大.近年来,粒子图像速度场仪(PIV)和计算流体力学(CFD)的发展为深入研究絮凝动力学提供了新的手段和方法,有望使湍流絮凝动力学得到进一步发展.     

典型黄土区油松树干液流变化特征分析

蒸腾耗水是植被水分利用的重要方式和重要过程之一,对植物养分输送、生长发育、应对和缓解干旱胁迫以及改善区域微气候等都具有重要意义.研究以半干旱黄土区的油松植被为例,基于四针式热扩散探针法监测树干液流的动态变化,探讨其蒸腾耗水规律,分析油松树种的水分利用方式及对生存环境的适应能力.结果表明,油松的液流速率具有明显的季节性差异,不同月份的液流速率以4月最低,其次为10月、9月和8月,分别为0.024、0.057、0.062和0.071 m L·(cm2·min)-1.液流速率的日变化在各个时期都呈现昼高夜低趋势,夜间液流速率较低,但不为零.在降雨事件影响下,夜间液流量在日液流总量中的比重明显增加,是晴朗天气的3.9倍,而白天液流量所占比重下降31.8%.寒潮期间液流速率表现出相似的变化趋势,对突变环境具有较强的适应能力.油松液流速率与气象因子显著相关,对液流速率影响的大小顺序为:太阳辐射水汽压亏缺相对湿度大气温度.     

处理水产养殖污水潜流湿地中的厌氧氨氧化菌群特征

厌氧氨氧化(anaerobic ammonium oxidation,ANAMMOX)是潜流湿地净化污水的重要功能,目前关于潜流湿地厌氧氨氧化特征还不清楚.为了解处理水产养殖污水潜流湿地中的厌氧氨氧化特点,采用16S rRNA基因克隆文库和实时荧光定量PCR技术以及多样性分析等方法,对处理水产养殖污水潜流湿地中ANAMMOX菌的结构、多样性和丰度进行了研究分析.结果表明,处理水产养殖污水潜流湿地中存在Candidatus brocadia和Candidatus kuenenia这2类已知的ANAMMOX菌和3类未知的ANAMMOX菌,其优势种群为Candidatus brocadia;在不同季节中,秋季潜流湿地中ANAMMOX菌的多样性最高(H',1.21),春季最低(H',0.64);在养殖周期内,潜流湿地中ANAMMOX菌的丰度(以鲜重计,下同)在8.0×104~9.4×106copies·g-1之间,总细菌丰度在7.3×109~9.1×1010copies·g-1之间;在潜流湿地不同层面以及不同季节中,ANAMMOX菌的丰度存在着明显的差异,总细菌丰度则差异不明显,ANAMMOX菌的丰度在不同层面上的差异没有随时间变化的规律性.根据潜流湿地中ANAMMOX菌的分布特征,改变养殖污水布水方式和调整湿地结构可以提高潜流湿地的反硝化效果.该研究为进一步优化潜流湿地结构,提高净化养殖污水效率提供了依据.     

Mathematical methods for application of experimental adiabatic data – An update and extension

The paper represents some results of comparative analysis of the methods used for processing and interpreting data of adiabatic calorimetry as well as applying it to practical situations. Specifically two approaches are compared – approximate method based on evaluation of simplified kinetics and a more comprehensive, simulation-based method that utilizes the evaluation of more detailed kinetic models.The analysis is focused on two important types of data processing – correction of experimental results on thermal inertia (phi-factor correction) and estimation of adiabatic time to maximum rate (TMR).The most widely cited method for phi-factor correction is considered and its improvement is proposed to enable more precise prediction of the adiabatic time scale. A procedure for phi-factor correction of pressure response is also proposed. The limitations of this enhanced Fisher's method are discussed by comparison with simulation-based method. All the illustrative materials are based on real examples.As an example of application, the simplified method will be used to predict TMR and its limitations will be discussed.     

Phosphate removal from domestic wastewater using thermally modified steel slag

This study was performed to investigate the removal of phosphate from domestic wastewater using a modified steel slag as the adsorbent. The adsorption effects of alkalinity, salt, water,and thermal modification were investigated. The results showed that thermal activation at 800℃ for 1 hr was the optimum operation to improve the adsorption capacity. The adsorption process of the thermally modified slag was well described by the Elovich kinetic model and the Langmuir isotherm model. The maximum adsorption capacity calculated from the Langmuir model reached 13.62 mg/g. Scanning electron microscopy indicated that the surface of the modified slag was cracked and that the texture became loose after heating. The surface area and pore volume did not change after thermal modification. In the treatment of domestic wastewater, the modified slag bed(35.5 kg) removed phosphate effectively and operated for 158 days until the effluent P rose above the limit concentration of 0.5 mg/L. The phosphate fractionation method, which is often applied in soil research, was used to analyze the phosphate adsorption behavior in the slag bed. The analysis revealed that the total contents of various Ca–P forms accounted for 81.4%–91.1%, i.e., Ca10–P 50.6%–65.1%, Ca8–P 17.8%–25.0%,and Ca2–P 4.66%–9.20%. The forms of Al–P, Fe–P, and O–P accounted for only 8.9%–18.6%. The formation of Ca10–P precipitates was considered to be the main mechanism of phosphate removal in the thermally modified slag bed.     

连续流动分析法测定水中硫化物的显色剂配制方法研究

针对连续流动分析法测定水中硫化物方法中显色剂N,N-二甲基-1,4苯二胺二盐酸盐保质期短的问题,研究了不同体积比盐酸或硫酸介质对延长显色剂保质期的影响,确定了延长保质期的试剂配制方法,并对该方法的适用性进行了检验.结果显示,体积比10％硫酸介质的显色剂优于盐酸介质显色剂,可以存放一周.使用此显色剂进行硫化物分析检出限为0.003 mg/L,线性范围0.000 mg/L ～2.00 mg/L,平行测定相对偏差0.0％ ～11.8％,加标回收率82.0％～102％,可以满足环境样品分析需求.     

Removal of formaldehyde over MnxCe1-xO2 catalysts: Thermal catalytic oxidation versus ozone catalytic oxidation

MnxCe1- xO2（x： 0.3–0.9） prepared by Pechini method was used as a catalyst for the thermal catalytic oxidation of formaldehyde（HCHO）. At x = 0.3 and 0.5, most of the manganese was incorporated in the fluorite structure of Ce O2 to form a solid solution. The catalytic activity was best at x = 0.5, at which the temperature of 100% removal rate is the lowest（270°C）. The temperature for 100% removal of HCHO oxidation is reduced by approximately 40°C by loading 5 wt.% Cu Oxinto Mn0.5Ce0.5O2. With ozone catalytic oxidation, HCHO（61 ppm） in gas stream was completely oxidized by adding 506 ppm O3 over Mn0.5Ce0.5O2 catalyst with a GHSV（gas hourly space velocity） of 10,000 hr-1at 25°C. The effect of the molar ratio of O3 to HCHO was also investigated. As O3/HCHO ratio was increased from 3 to 8, the removal efficiency of HCHO was increased from 83.3% to 100%. With O3/HCHO ratio of 8, the mineralization efficiency of HCHO to CO2 was 86.1%. At 25°C, the p-type oxide semiconductor（Mn0.5Ce0.5O2） exhibited an excellent ozone decomposition efficiency of 99.2%,which significantly exceeded that of n-type oxide semiconductors such as Ti O2, which had a low ozone decomposition efficiency（9.81%）. At a GHSV of 10,000 hr-1, [O3]/[HCHO] = 3 and temperature of 25°C, a high HCHO removal efficiency（≥ 81.2%） was maintained throughout the durability test of 80 hr, indicating the long-term stability of the catalyst for HCHO removal.