Effects of typical additives on the thermal stability of ammonium peroxydisulfate

Ammonium peroxydisulfate (APS), one of the most widely used inorganic peroxides in the process industries, is a thermally unstable peroxide and potent oxidizer due to the presence of peroxy bond in the molecule and is incompatible with most substances. To investigate the effect of typical additives on the thermal decomposition of APS, in this paper, diamine phosphate (DAP), monoamine phosphate (MAP), and aluminum hydroxide (AH) were selected as additives; pure APS and samples with 10 wt% and 20 wt% of additives were first tested by differential scanning calorimetry (DSC). The experiments and analysis showed that the samples with 10 wt% of additive had better thermal stability than those with 20 wt% of additive. After screening, the three groups of 10 wt% AH, 10 wt% MAP, and 20 wt% MAP additive conditions could be considered to have a better thermal stability effect on the thermal decomposition of APS. Four groups of samples were, in turn, tested by Phi-Tec II. The adiabatic results showed two discontinuous exothermic processes; 10 wt% AH promoted the weak exothermic effect in the first stage. In contrast, the three groups of additives in the main exothermic stage showed different degrees of inhibition, and the inhibiting effect was ranked as 10 wt% AH, 10 wt% MAP, and 20 wt% MAP in order. Finally, the self-accelerated decomposition temperature (SADT) was calculated under the 25 kg standard package. The adiabatic results, including SADT, were combined to render feasible recommendations for the use of additives, which provides references for the packaging and transportation of additives and their applications.     

Effects of environmental temperature on the thermal runaway of lithium-ion batteries during charging process

Lithium-ion batteries with relatively narrow operating temperature range have provoked concerns regarding the safety of LIBs. In this work, a series of experiments were conducted to explore the thermal runaway (TR) behaviors of charging batteries in a high/low temperature test chamber. The effects of charging rates (0.5 C, 1 C, 2 C, and 3 C), and ambient temperature (2 °C, 32 °C and 56 °C) are comprehensively investigated.The results indicate that the cell exhibited greater thermal hazard at the high charging rate and ambient temperature conditions. As the charging rate increased from 0.5 C to 3 C, more lithium intercalated in the anode prompt the TR triggered in advance, the TR onset temperature decreased from 297.5 °C to 264.7 °C. In addition, the charging time decreased with the elevated ambient temperature, resulting in a relatively higher TR onset temperature and lower maximum temperature, and the average TR critical time declined by 115–143 s. Finally, the TR required less heat accumulation with increasing of charging rate and ambient temperature, and the heat generation of side reaction played a substantial role that accounted for approximately 54%∼63%. These results provide an insight into the charging cell thermal runaway behaviors in complex operation environments and deliver valuable guidance for improving the safety of cell operation.     

Immediate behavioural responses to earthquakes in Christchurch,New Zealand,and Hitachi,Japan

This study examines people's immediate responses to earthquakes in Christchurch, New Zealand, and Hitachi, Japan. Data collected from 257 respondents in Christchurch and 332 respondents in Hitachi revealed notable similarities between the two cities in people's emotional reactions, risk perceptions, and immediate protective actions during the events. Respondents' physical, household, and social contexts were quite similar, but Hitachi residents reported somewhat higher levels of emotional reaction and risk perception than did Christchurch residents. Contrary to the recommendations of emergency officials, the most frequent response of residents in both cities was to freeze. Christchurch residents were more likely than Hitachi residents to drop to the ground and take cover, whereas Hitachi residents were more likely than Christchurch residents to evacuate immediately the building in which they were situated. There were relatively small correlations between immediate behavioural responses and demographic characteristics, earthquake experience, and physical, social, or household context.     

Occurrence and migration of microplastics and plasticizers in different wastewater and sludge treatment units in municipal wastewater treatment plant

● Reduce the quantifying MPs time by using Nile red staining. ● The removal rate of MPs and PAEs in wastewater and sludge were investigated. ● MPs and PAEs were firstly analyzed during thermal hydrolysis treatment. ● The removal of PAEs from wastewater and sludge was mainly biodegradation. Microplastics (MPs) and plasticizers, such as phthalate esters (PAEs), were frequently detected in municipal wastewater treatment plants (MWTP). Previous research mainly studied the removal of MPs and PAEs in wastewater. However, the occurrence of MPs and PAEs in the sludge was generally ignored. To comprehensively investigate the occurrence and the migration behaviors of MPs and PAEs in MWTP, a series of representative parameters including the number, size, color, shape of MPs, and the concentrations of PAEs in wastewater and sludge were systematically investigated. In this study, the concentrations of MPs in the influent and effluent were 15.46±0.37 and 0.30±0.14 particles/L. The MP removal efficiency of 98.1% was achieved and about 73.8% of MPs were accumulated in the sludge in the MWTP. The numbers of MPs in the sludge before and after digestion were 4.40±0.14 and 0.31±0.01 particles/g (dry sludge), respectively. Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that the main types of MPs were polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS). Six PAEs, including phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), ortho dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), and bis(2-ethyl) hexyl phthalate (DEHP), were detected in the MWTP. The concentrations of total PAEs (ΣPAEs) in the influent and effluent were 76.66 and 6.28 µg/L, respectively. The concentrations of ΣPAEs in the sludge before and after digestion were 152.64 and 31.70 µg/g, respectively. In the process of thermal hydrolysis, the number and size of MPs decreased accompanied by the increase of the plasticizer concentration.     

Control of combustion-generated nitrogen oxides by selective non-catalytic reduction

Controlling nitrogen oxides (NO(x)) emissions is becoming a daunting technical challenge as increasingly strict emission limits are being imposed. The stringent regulations have prompted the innovation and characterization of NO(x) control technologies suitable for various applications. This paper presents a review on NO(x) removal techniques with particular reference to selective non-catalytic reduction (SNCR) technology. This includes initially how SNCR emerged as a technology along with a comparison with other relevant technologies. A review of various features related to selective non-catalytic gas phase injection of ammonia and ammonium salts (as reducing agent) is presented. The use of urea solution as a reducing agent and its performance in laboratory and pilot scale tests as well as large-scale applications is also discussed. Use of cyanuric acid as a potential reducing agent is also presented. The underlying reaction mechanisms have been reviewed for ammonia, urea and cyanuric acid for the explanation of various observations. Computational fluid dynamics (CFD) modeling as applied to SNCR is also presented. Subsequently the use of SNCR coupled with other in-combustion and post-combustion NO(x) control techniques is elaborated. Additionally, a two-stage NO(x) removal strategy to control un-reacted ammonia slip and to improve overall efficiency is discussed. At the end a summary is given which highlights various areas needing further research.     

民航空中交通管制设施雷电防护的特点

主要结合多年民航系统设备设施的雷电防护建设实践,在符合国家和民航局相关规定、技术规范的前提下,理论结合实际说明民航通信、导航、监视设施雷电防护的特点。     

清江流域自然旅游资源调查与评价方法

根据清江流域自然旅游资源的特色，首先提出了一套对其进行详细系统的调查方法：（１）利用遥感数字图象处理技术及航、卫片解译结果，圈出潜在景区及潜在景点；（２）详细调查、收集及整理清江流域各市、镇已有资料，填写旅游资源调查登记卡片；（３）在（１），（２）基础上，对主要潜在景区及景点进行野外现场调研。然后，以调查结果为前提，提出了采用综合评分法，模糊数学评价方法，信息量评价方法，神经网络评价方法及地理信息     

厌氧微网反应器处理生活污水膜污染物研究

采用涤纶网加工的微网膜组件与厌氧反应器结合构成厌氧微网生物反应器用于处理城市生活污水。在不同反应器形式和水力停留时间条件下反应器稳定运行了144 d。研究结果表明完全搅拌反应器在膜通量12 L/(m2.h)条件下跨膜压差变化较小,整体出水水质高于无搅拌式反应器。通过膜面SS含量测定、粒径和三维荧光光谱分析等方法对膜面污染物进行了系统分析。无搅拌式AnFBR随着停留时间的延长,膜面污染物的SS减少,粒径减小;完全搅拌式AnFBR膜面污染物的SS最少,粒径最小。三位荧光分析表明SMP主要有2个类蛋白质荧光峰A和B,中心位置(Ex/Em)分别位于230~235/335~350 nm及280~290/330~355 nm,EPS样品中除了峰A和峰B外还有2个峰,峰C位置(Ex/Em)在340~350/435~445 nm,与类富里酸物质有关,峰D位于420~440/465~515 nm,与类腐殖酸物质有关。     

From waste hot-pot oil as carbon precursor to development of recyclable attapulgite/carbon composites for wastewater treatment

The utilization of waste products as valuable materials was a technical imperative for waste management. In this study, the cost-effective attapulgite/carbon(APT/C) composite was developed for wastewater treatment using waste hot-pot oil as a carbon precursor through a facile one-step calcination process. The APT/C composite prepared at 300°C exhibited the excellent adsorption capacity and rapid equilibrium rate over a broad p H range for the removal of various pollutants. More importantly, the removal ratios of the composites toward Methyl Violet and tetracycline still remained 77.6% and 60.2% of the initial adsorption capacity after ten adsorption–regeneration cycles via a facile thermal regeneration strategy, respectively.Beyond all doubt, this research provided a feasible and economical way for the sustainable utilization of waste hot-pot oil in wastewater treatment, achieving the concept of disposal waste with waste and recycling.     

海滨核电建造期可剥涂层的临时防护性能研究

目的 考察可剥涂层在海洋大气环境下的大型工程建造中的临时防护作用。方法 对来自两个厂家的可剥涂层进行了为期12周的耐候性试验,对可剥涂层在不锈钢及碳钢/环氧两种基底上的可剥离性、防护性和氟氯残留量进行了测试。结果 两个厂家的涂层在外观、耐蚀性、附着力等方面的试验结果没有明显差异,涂层的剥离强度均低于0.05 kN/m,涂层剥离后不锈钢表面的氟氯离子残留量远低于15 ?g/dm2,试验周期内环氧漆色差变化较小。结论 两个厂家的可剥涂层在光泽、硬度和剥离强度等测试方面的结果上存在差异,但对环氧漆均有着较好的防护作用,试验期内剥离性良好,且无有害化学元素残留,具有较高的工程应用价值。