城市居民交通方式选择及其影响因素分析——以南京市为例

随着我国城市化水平的提高,城市交通能源消费占总能源消费的比重逐渐增大,交通方式选择及其影响因素研究引起广泛关注。本研究通过调查南京居民出行交通方式,并通过多项logit模型(multinomial logit model),探究影响居民交通选择的关键因素,为城市交通政策的制定提供科学依据,并根据估算结果分析不同政策下交通方式改变带来的节能减排效应。结果显示:出行特性(如出行距离)、出行者的个人特征(如性别、年龄、职业)与出行者的家庭特征(如是否有私家车,是否有小孩)都对交通方式选择有显著影响。如果通过有效的交通政策引导,使私家车出行转变为轨道交通出行,南京每天大约可减少1573.5吨碳排放。     

地下水PRB原位生物修复中一种释氧材料的改进技术及效果分析

释氧材料经济有效的释氧是地下水原位生物修复的关键因素。实验通过在释氧材料中加入膨润土、磷酸二氢钾和硫酸铵等,改进释氧材料的性能。柱实验结果显示,该释氧材料释氧速率缓慢,释氧时间长,可以使溶液中DO长期保持在5 mg/L以上;另外,释氧材料中添加的缓冲剂及天然含水层介质对pH值有较好的缓冲作用,可以使pH值达到后续生物修复的要求。     

雾化介质阻挡放电联合电晕放电对染料溶液脱色研究

实验将介质阻挡放电与电晕放电组合在一个反应器内,以靛蓝二磺酸钠溶液为实验废水,将高压电极上通入50Hz交流高压电,在常压空气中形成介质阻挡放电-电晕放电系统,放电产生的低温等离子体及其活性基团作用于染料分子。考察了电源电压、电极间距、处理时间对染料溶液脱色率和能量效率水平的影响,确定反应器工作状态为介质阻挡放电系统电极间距30mm、电晕放电系统电极间距25mm、电源电压20kV。     

介质阻挡放电联合催化臭氧化降解甲苯

采用介质阻挡放电区后结合MnOx/Al2O3/发泡镍去除甲苯,考察甲苯进气方式、臭氧产生方法及湿度对甲苯与O3同时去除的影响。结果表明,O3是等离子体区后催化降解甲苯的主要物种,介质阻挡放电联合催化臭氧化可实现甲苯及O3的同时高效去除。输入电压为9.0 kV时,甲苯的去除效率达92.8%,在80 min内O3的去除效率维持在99%以上。水蒸气对催化剂催化分解臭氧的活性没有直接的影响,O3浓度较高时湿度对甲苯降解效率的影响很小。GC-MS分析结果表明,甲苯降解的主要气相副产物有烷烃、酸、酮和含苯环有机物,提出了甲苯的降解途径。     

Enhanced retention of linuron, alachlor and metalaxyl in sandy soil columns intercalated with wood barriers

A study has been made of the effect a reactive barrier made of pine (softwood) or oak (hardwood) wood intercalated in a sandy soil column has on the retention of linuron, alachlor and metalaxyl (pesticides with contrasting physicochemical characteristics). The leaching of pesticides has been carried out under a saturated flow regime and breakthrough curves (BTCs) have been obtained at flow rates of 1 mL min⁻¹ (all pesticides) and 3 mL min⁻¹ (linuron). The cumulative curves in the unmodified soil indicate a leaching of pesticides >80% of the total amount of compound added. After barrier intercalation, linuron leaching decreases significantly and a modification of the leaching kinetics of alachlor and metalaxyl has been observed. The theoretical R factors increased ∼2.6-3.3, 1.2-1.6-fold, and 1.4-1.7-fold and the concentration of the maximum peak decreased ∼6-12-fold, 2-4-fold and 1.2-2-fold for linuron, alachlor and metalaxyl, respectively. When considering the three pesticides, significant correlations have been found between the theoretical retardation factor (R) and the pore volume corresponding to the maximum peaks of the BTCs (r = 0.77; p < 0.05) or the total volume leached (r = −0.78; p < 0.05). The results reveal the efficacy of reactive wood barriers to decrease the leaching of pesticides from point sources of pollution depends on the type of wood, the hydrophobicity of the pesticide and the adopted water flow rate. Pine was more effective than oak in decreasing the leaching of hydrophobic pesticide linuron or in decreasing the maximum peak concentration of the less hydrophobic pesticides in soils. Efficacy of these wood barriers was limited for the least hydrophobic pesticide metalaxyl.     

阴极氧还原产电生物可渗透反应栅的研究Ⅰ. 不锈钢毛电极模拟反应器

提出利用阴极氧还原和阳极微生物产电作用的产电生物可渗透反应栅（CORE-PRB）方法用于被有机物污染的地下水的修复,并以不锈钢毛为电极建立模拟反应装置验证了CORE-PRB的技术概念。实验中考察了分别以蔗糖＋醋酸盐和不同浓度的污泥消化液为进水时的反应电流,并研究电极距离对反应电流的影响。由于氧还原阴极阳极反应能力的限制,随着与阴极室距离加大,模拟反应装置各阳极室的电流迅速减小。有机基质的可生化性对模拟反应器的总电流也有显著影响。     

林火烈度评价及其空间异质性研究进展

回顾了林火烈度评价的方法,包括单因素评价、综合评价和遥感技术的应用等;综述了林火烈度空间异质性的最新研究进展;展望了林火烈度及其空间异质性研究的未来发展趋势。     

破碎带对地下坑道动力响应影响的数值分析

为了研究破碎带的耗能作用及其对坑道结构动力响应的影响,根据某工程实例,建立了地冲击波作用下类岩体中坑道结构响应的计算模型,利用LS-DYNA3D有限元软件,分别计算了无破碎带和存在破碎带情况下坑道结构的动力响应。计算结果的对比分析表明,顶部破碎带使结构的加速度和位移等运动参数有不同程度的降低,但对结构所受到的应力影响不大;与之相反,侧部破碎带的存在使结构的加速度和位移等运动参数明显地增大。与顶部存在破碎带情况相比,侧部存在破碎带情况下坑道结构运动参数的峰值更大,对坑道结构安全更为不利。     

中型景观尺度下斑块类型和地理特征影响杨树人工林干部病害的发生——以河南省清丰县为例

景观病理学在开展病原扩散、病害发生及其严重程度方面以其全新的视角,为森林病害的区域控制提供了新的研究技术及理论支持。首次利用景观病理学原理和方法对河南省清丰县一个中型景观下杨树人工林干部病害发生特征开展了研究,目的是解析在大尺度下斑块类型和地理特征对杨树人工林病害发生的影响。在100 km2的调查区域,以种植方式和林分类型划分斑块类型,分析显示发病株率在不同斑块间差异显著：农田间作斑块的林木发病株率显著低于孤立斑块、纯林斑块、混交林等斑块的发病株率;但发病株率在孤立斑块、纯林斑块及混交林等斑块间无显著差异。抚育管理措施对预防和减轻杨树人工林干部病害的发生起到关键左右：精细管理林分（有修枝、施肥和锄草）的林木发病株率（p=0.001）和发病指数（p〈0.001）均显著低于粗放管理林分（无修枝、无施肥和锄草等）。人类活动,如无序修剪和放牧很可能是造成村落附近林分发病率显著高于其他地点林分的主要原因。采用logistic回归,以品种编号、树龄、树高、林分密度、林分郁闭度、林分类型、斑块类型、地理特征,等为自变量建立病害发生预测模型。方程拟合达到极显著水平（Wald=71.248,p〈0.001）。方程总的预测正确率为68.2%,发病的预测正确率为79.8%。     

Conservation by Design

Abstract: Conservation researchers are increasingly aware of the need to conduct interdisciplinary research and to engage nonscientists in practical applications of conservation biology. But so far, industrial designers have been left out of such collaboration and outreach efforts. Conservation of wildlife often depends on products such as nest boxes, feeders, barriers, and corridors, all of which have a designed component that is frequently overlooked. Furthermore, many products are adopted without testing on short or long time scales. We argue that the design of products for conservation, and hence their functionality, effectiveness, and value, can be improved through collaboration with industrial designers. We see four key benefits that can arise from interactions with industrial designers: improvement of product quality and value, innovation and improvement in functionality of products, harmonization of conservation products with local values, and development of a psychological biomimesis approach to design. The role of industrial designers in conservation projects would be to improve factors such as product durability, affordability, functionality, and aesthetic appeal to local people. Designers can also help to create multiple product options whose success can be tested in the field. We propose that collaborations with industrial designers can contribute to the development of improvements to existing products and innovations in the practice of animal conservation.