Cytotoxicity of the soluble and insoluble fractions of atmospheric fine particulate matter

Inhaled atmospheric fine particulate matter(PM_(2.5)) includes soluble and insoluble fractions,and each fraction can interact with cells and cause adverse effects.PM_(2.5) samples were collected in Jinan,China,and the soluble and insoluble fractions were separated.According to physiochemical characterization,the soluble fraction mainly contains watersoluble ions and organic acids,and the insoluble fraction mainly contains kaolinite,calcium carbonate and some organic carbon.The interaction between PM_(2.5) and model cell membranes was examined with a quartz crystal microbalance with dissipation(QCM-D) to quantify PM_(2.5) attachment on membranes and membrane disruption.The cytotoxicity of the total PM_(2.5) and the soluble and insoluble fractions,was investigated.Negatively charged PM_(2.5) can adhere to the positively charged membranes and disrupt them.PM_(2.5)also adheres to negatively charged membranes but does not cause membrane rupture.Therefore,electrostatic repulsion does not prevent PM_(2.5) attachment,but electrostatic attraction induces remarkable membrane rupture.The human lung epithelial cell line A549 was used for cytotoxicity assessment.The detected membrane leakage,cellular swelling and blebbing indicated a cell necrosis process.Moreover,the insoluble PM_(2.5) fraction caused a higher cell mortality and more serious cell membrane damage than the soluble fraction.The levels of reactive oxygen species(ROS) enhanced by the two fractions were not significantly different.The findings provide more information to better understand the mechanism of PM_(2.5) cytotoxicity and the effect of PM_(2.5) solubility on cytotoxicity.     

旋压变形数值模拟中局部加载卸载问题的处理

此文介绍了旋压加工数值模拟中遇到的局部加载卸载问题的处理方法,并对筒形件强力旋压过程进行了数值模拟,求得了变形区应力应变的分布,理论计算结果与变形实际和实测结果完全吻合.     

管材的冲切加工

此文系统介绍了管材冲切加工的工艺及模具设计,对常用圆断面管材的各种冲切工艺,如端口平面冲切、型面冲切等进行了探讨;分析了管材冲切加工中存在的主要问题;就如何提高冲切质量提出了行之有效的解决办法。     

On the response of 500 gal propane tanks to a 25% engulfing fire

This paper presents detailed data on the thermal response of two 500 gal ASME code propane tanks that were 25% engulfed in a hydrocarbon fire. These tests were done as part of an overall test programme to study thermal protection systems for propane-filled railway tank-cars.

The fire was generated using an array of 25 liquid propane-fuelled burners. This provided a luminous fire that engulfed 25% of the tank surface on one side. The intent of these tests was to model a severe partially engulfing fire situation.

The paper presents data on the tank wall and lading temperatures and tank internal pressure. In the first test the wind reduced the fire heating and resulted in a late failure of the tank at 46 min. This tank failed catastrophically with a powerful boiling liquid expanding vapour explosion (BLEVE). In the other test, the fire heating was very severe and steady and this tank failed very quickly in 8 min as a finite rupture with massive two-phase jet release. The reasons for these different outcomes are discussed. The different failures provide a range of realistic outcomes for the subject tank and fire condition.     

On the thermal rupture of 1.9 m propane pressure vessels with defects in their thermal protection system

This paper describes the results from a series of fire tests that were carried out to measure the effect of defects in thermal protection systems on fire engulfed propane pressure vessels.

In North America thermal protection is used to protect dangerous goods rail tank-cars from accidental fire impingement. They are designed so that a tank-car will not rupture for 100 min in a defined engulfing fire, or 30 min in a defined torching fire. One common system includes a 13 mm blanket of high-temperature ceramic fibre thermal insulation covered with a 3 mm steel jacket. Recent inspections have shown that some tanks have significant defects in these thermal protection systems. This work was done to establish what levels of defect are acceptable from a safety standpoint.

The tests were conducted using 1890 l (500 US gallon) ASME code propane pressure vessels (commonly called tanks in the propane industry). The defects tested covered 8% and 15% of the tank surface. The tanks were 25% engulfed in a fire that simulated a hydrocarbon pool fire with an effective blackbody temperature of 870 °C.

The fire testing showed that even relatively small defects can result in tank rupture if the defect area is engulfed in a severe fire, and the defect area is not wetted by liquid from the inside. A wall failure prediction technique based on uniaxial high-temperature stress rupture test data has been developed and agrees well with the observed failure times.     

后张梁管道摩阻损失测试技术与数据处理

针对常规测试中存在的问题 ,改进了管道摩阻损失的测试方法 ,消除了喇叭口等因素影响 ,使得管道摩阻测试更加合理和准确。介绍了后张法预应力管道摩阻损失的计算 ,结合秦沈客运专线双线整孔简支箱梁的管道摩阻损失测试 ,利用最小二乘原理对测试数据进行处理 ,得到了摩阻系数 μ和k的计算公式 ,所得参数为施工提供了依据。最后讨论了摩阻系数对张拉控制应力的影响 ,提出现场测试的一般性原则和要求。     

重型自卸汽车车架横梁异常断裂原因分析

针对无副车架的重型自卸汽车在使用过程中出现的车架横梁异常断裂问题,建立了以板壳单元为基本单元的自卸汽车车架有限元分析模型,采用NASTRAN有限元分析软件对车架强度进行分析.有限元分析结果表明,车架横梁异常断裂现象是横梁连接部位应力值大于材料的屈服强度引起的,这与实车车架断裂结果吻合.根据实际工艺要求,改造车架结构,将连接第2根横梁和纵梁的L板厚度变大,并将平衡悬架推力杆支座由整体式支撑改为分体式支撑,从而使两处的最大应力值分别比原结构下降20.4%和51.7%.改进后车架断裂区的强度明显提高,这表明改造方法有效.     

陆缘伸展区的地震激发机制

江苏所处的中国东部被当代横贯欧亚的北西西向环球螺旋形扭转断裂带（其东段即大别—舟山断裂）分割为南部的褶皱山带隆升区和北部的沉降区。软流圈从太平洋方向面楔入北部区，使该区岩石圈减薄，陆壳向海洋伸展、离裂，产生郯庐断裂等具有直扭性质的近南北向软流（及地幔）底辟，并伴随有多层水平拆离面，所见为高导低速的水平破裂带。绝大多数地震沿着其中埋深１５ｋｍ（±５ｋｍ）的第一水平破裂带发生，使北部区成面积性地震区。结合高压物性实验所得的岩石微破裂规律（…分割—错位—嵌合—再分割…）判断得知，水平破裂带中的膨胀增厚部分的流体处在超压状态而成为储能体，在陆壳伸展运动中会突然释放能量而诱发地震。因此，根据已有实际分析认为：强震和频震区的发展的必要条件是软流楔入和陆壳伸展，而其充分条件是储能体在软流冲击和增温效应下的爆裂或突然塌缩事件。据此可根据软流运动和岩石圈结构预测未来震中，建立中、长期预报甚至短临预报的监控系统     

Propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation

The coupled fluid-structure-rupture model was developed to study the propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation. The dynamic rupture of pipe and propagation of blast wave were well coupled together in every timestep during the simulation. The numerical model was validated with experiments in terms of both typical rupture profiles and blast overpressures. Results reveal that crack branching of pipe can dramatically increase the rupture opening rate which controls the intensity and shape of the resultant blast wave. Due to the process of crack initiation and extension, the blast wave out of the pipe first forms and then is strengthened by the subsequent compression waves. This makes the maximum peak overpressure appears at a certain standoff distance above the rupture. Despite consuming some percentages of energy, the dynamic rupture of pipe generally presents positive effects (up to 2–3 times) on the blast wave intensity along the jetting direction due to the convergence effect of rupture opening on the release of internal high-pressure gas. Finally, through defining normalized overpressure and impulse based on the same hydrogen detonation in open spaces, the quantitative influences of pipe rupture on the blast wave intensity in cases of different detonation pressures and standoff distances are clarified.     

汶川地震映秀镇地质条件与地表破裂特征调查

2008年5月12日14时28分04秒,四川省汶川县发生了MS 8.0地震.根据地震部门测定,本次地震是从映秀开始破裂,震中位于四川汶川县映秀镇附近(北纬31.015°,东经103.365°).在中国地震局组织的汶川地震科学考察成果基础上,本文分析了映秀地质条件:主要发育的地层为二叠系的石英闪长岩,震旦系的砂岩;通过研究区的主要构造为龙门山中央断裂-映秀-北川断裂;主要的地貌类型为河流地貌.调查了研究区的地表破裂特征,根据研究区的地貌类型将其划分为A、B、C三段,A段为河床沉积地貌,垂直断距最大;B段为丘陵地貌,断距中等,但诱发崩塌地质灾害;C段为河流边滩地貌,断距较小,但震害严重.