超高速瞬态测试系统软硬件构架设计研究

目的研究采样频率为2~10 MHz的64通道超高速同步瞬态测试系统的设计技术,实现两类典型超高速瞬态测试系统的硬件架构设计与软件架构设计。方法一类采用PXI-Express高带宽总线和高速RAID磁盘阵列架构构建持续流盘存储的连续高速测试系统,另一类是采用大容量板载数据缓存和PXI总线事后下载传输数据的架构构造高速测试系统。在高性能测试软件设计方面,主要应用生产者/消费者结构与有限状态机相结合的软件架构进行高性能测试系统软件设计。结果目前64通道下基于持续流盘架构的测试系统受数据记录的速度限制系统最高采样频率仅达2.5 MHz,而基于板载缓存数据与PXI总线事后下载数据架构的测试系统最高采样频率可达10 MHz,测试时长可达5 s。结论当前两类架构的测试系统均可满足超高速瞬态测试需求,设计时需根据需求的最高采样频率决定使用的架构形式。     

固定源细颗粒物稀释测试法现场应用存在问题及影响因素分析研究

对基于大气环境的稀释测试法在现场应用中存在的主要问题进行了归纳总结,并对若干影响细颗粒物测试结果的重要因素进行了分析,诸如停留时间、稀释比、采样时间等因素,期望能够对该法测试系统的后续改进或重新设计提供实际问题导向,同时也能够对该领域现场工作的科研人员提供非常有用的经验。     

被动加标在水生生态风险评价中的应用——以多氯联苯分配系数的测定为例

准确的水生生态风险评价需要可靠的毒性数据,而其获取要求在一定时间范围内,水体中污染物的浓度保持恒定。对疏水性有机污染物进行水体生物毒性测试时,通常采用有机溶剂加标,然而该方式可能因为污染物的挥发和降解、容器壁吸附、生物摄取等问题,水体中污染物浓度持续下降,导致污染物的浓度-效应关系难以明确。近期为了克服这些问题,被动加标用于替代溶剂加标,通过污染物在加标体系中平衡分配来维持精确和恒定的水体浓度,同时还可通过测定加标聚合物中污染物的浓度来监测水体浓度。首先介绍了被动加标方法及其材料选择,讨论了该方法在生态风险评价中的主要应用,包括分配系数的测定、体外细胞测试、体内生物积累及毒性测试,以及沉积物毒性评价等。然后,以测定代表污染物多氯联苯在聚二甲基硅氧烷与水间的分配系数为例,详细说明被动加标的操作流程。最后,讨论了被动加标方法的优缺点,并对其在水生生态风险中的应用前景进行了展望。     

Comparative abiotic or biotic degradation of carboxin by two Entisols with different surface properties or Pseudomonas aeruginosa strain: A toxicity study using the crustacean Thamnocephalus platyurus

The microcrustacean Thamnocephalus platyurus was used to detect the toxicity reduction of carboxin in abiotic degradation compared to biotic degradation. The abiotic degradation was obtained using two sterilized Entisols with different surface properties while the biotic degradation by Pseudomonas aeruginosa was obtained using the fungicide as the only C source. The results showed that the highest toxicity reduction rates for the abiotic degradation were achieved in 20 days with 49.2% for the coarser soil, 60.7% for the soil with a finer texture, whereas for the biotic degradation, 60.6%. Analysis (¹H NMR) showed that the soils transformed carboxin to produce sulfoxide and enol in different concentrations depending on the soil properties, while P. aeruginosa metabolized the fungicide to produce inorganic compounds such as ammonium and nitrite, minor degradation pathways were oxidized to sulfoxide and hydrolytic ring-opening to 2-[(2-hydroxyethyl)thio]acetoacetanilide enol. These results indicated that the degradation of carboxin occurred via abiotic catalytic processes as well as via biotic transformation leading to less toxic derivatives and such phenomena are caused by exchange/surface features of soils, rather than by the mere content of clay or organic matter fractions.     

几种压力容器在役监控技术及应用

介绍了若干压力容器在役监控技术的实例。声发射技术和超声检测是比较可行的监控技术。     

利用薄片穿透法确定铝合金最大蚀坑深度

目的研究铝合金最大蚀坑深度与环境试验时间的对应关系,为新型合金服役前的耐蚀性评级和结构件服役过程中的剩余寿命预测提供技术基础。方法利用光学显微镜、扫描电镜分析海洋大气环境中新型铝合金的腐蚀类型,并利用薄片穿透法研究铝合金薄片最大蚀坑深度与试验时间的对应关系。结果经过海洋大气环境暴露试验后,2A97铝合金发生了深入合金内部的严重点蚀,检测薄片试样背面电解液的出现时间,可以确定环境试验中蚀坑穿透薄片试样的时间。通过测量不同厚度薄片试样的穿透时间,可以确定最快生长局部腐蚀点的深度和时间的关系。结论中性盐雾试验环境下,达到相同的最大蚀坑深度,2A97铝合金与AA2024铝合金用时基本相当。     

Experimental study on non-destructive testing of rock bolts based on pseudo-random signal

The quality of rock bolt anchoring is closely related to the stability and safety of underground engineering and slope protection. In this paper, non-destructive testing of rock bolts is proposed based on pseudo-random signal, owing to the deficiencies of the conventional detecting method of stress wave reflection. The characteristics of pseudo-random signal for non-destructive testing of rock bolts are introduced. And the rock bolts are tested in the experiment, the time of reflection wave is identified and the length of rock bolts is calculated through cross correlation analysis between the extracted wavelet signal and the test signal. It is proved that the testing results of non-destructive testing methods based on pseudo-random signal are of low deviation. The experiment has shown that non-destructive testing of rock bolts based on pseudo-random signal is feasible with high precision.